Transactions of Nonferrous Metals Society of China The Chinese Journal of Nonferrous Metals

您目前所在的位置：首页 - 期刊目录

中国有色金属学报

The Chinese Journal of Nonferrous Metals

第20卷    第z1期    2010年10月


理论与基础研究
Ti-10Cr合金析出相对硬度的影响 冯  亮，葛  鹏，杨  义，周  伟 1
热轧变形对TB-13合金组织和织构的影响 费  跃1，常  辉1，唐  斌1，寇宏超1，朱知寿2，商国强2，周  廉1 6
显微组织对近α型TG6钛合金高温蠕变变形行为的影响 段  锐1,  张  华2,  蔡建明1,  黄  旭1,  曹春晓1 11
TC21合金片层组织特征对其断裂韧性的影响 党  薇1，薛祥义1，李金山1，胡  锐1，朱知寿2，张丰收3，周  廉1 16
添加返回炉料TA15钛合金材料的基础研究 丁长勤，高  博，魏寿庸，何书林，陈战乾，马  英，刘艳荣 21
锻造工艺对TC10钛合金棒材性能的影响 陈国财，杨文甲，陈  苏，晁  雷 25
辊模拉伸Ti6A14V钛合金丝材的力学性能分析 范  珂，陶海林，周书成，王建斌，王  田 28
Ti-55钛合金连续冷却转变曲线的测绘及显微组织的演变 方  波1，陈志勇2，陈仲强1，刘军和3，王清江2，刘  艳1，冯贞伟3，
刘建荣2，宋玺玉1，魏		 32
Ti600高温钛合金的力学性能 郭  萍1, 2，洪 权1, 赵永庆1, 2，戚运莲1，辛社伟1，刘  伟1 36
变形参数对TA15合金厚板显微组织及力学性能的影响 郭志军, 王  俭, 王红武 40
TA15钛合金显微组织与损伤容限性能的关系 何书林1 ，雷小军1，王小翔1，马英杰2，王希哲3，王鼎春1 43
钛合金厚板窄间隙TIG焊接接头的组织和力学性能 胡伟民，李国林，刘希林，张建欣，王  岗 48
Ti-1023钛合金的疲劳极限与拉伸强度的关系 黄利军，齐立春，刘昌奎，刘德林，黄  旭 54
冷轧工业纯钛的微观组织及力学性能 蒋建华，丁  毅，单爱党 58
热处理对TA15钛合金高周疲劳性能的影响 赖运金1, 2, 张丰收2, 杜予晅2, 侯艳荣2, 王永哲2, 马文革2, 刘向宏2, 冯 勇2, 张平祥1, 62
包覆叠轧TA7钛合金薄板的组织与力学性能 庞  洪1，张海龙1，王希哲2，吴  凯1，陈  东1 66
紧固件用Ti-45Nb合金丝材的性能评价 商国强1，王新南1，唐  斌2，朱知寿1，寇宏超2，张丰收3，常  辉2 70
Ti60钛合金大棒材的显微组织及力学性能 石卫民1, 魏寿庸1, 王鼎春1, 李渭清1, 王青江2, 刘建荣2 75
锻造温度对TC4-DT钛合金棒材力学性能及
显微组织的影响		 史小云，付宝全，王文盛，唐晓东，陈小苗 79
Ti2448合金在不同应变速率下的高温变形机制 田宇兴, 李述军, 郝玉琳, 杨 锐 83
TC4-DT钛合金自由锻件组织与性能的影响因素 童 路1, 朱知寿1, 俞汉清2, 王之录3 87
Ti-55钛合金超塑性板材的显微组织与力学性能 王娟华1，王红武1，陈志勇2， 陈永辉1，王  新1，张  磊1，贺  军1，田  丽1 91
片层组织TA15钛合金的热变形行为及组织球化 吴成宝，杨  合，孙志超，樊晓光 94
加工工艺对Ti5553合金等温锻件力学性能和
显微组织的影响		 徐  锋，计  波，朱益藩，罗月新，庞克昌 100
热加工工艺对BTi-6431S钛合金厚板组织与性能的影响 杨  伟1，王  俭1，王红武1，董震键1，王小翔1, 2，王韦琪1, 2 104
冷镦和热镦对TC16合金组织和性能的影响 杨  洋，董利民，关少轩，刘羽寅，杨  锐 107
热变形参数对BTi−62421S合金微观组织及
性能的影响		 张慧芳1，张治民1，张  星1，李保成1，马鸿海2 113
热氢处理对Ti600钛合金组织和性能的影响 张鹏省，赵永庆，毛小南，洪  权，韩  栋 118
中温旋锻变形Ti2448合金的显微组织及力学性能 张振波1，李述军1，郝玉琳1，杨  锐1，郭正晓2 123
热循环温度对Ti-6Al-4V合金组织和力学性能的影响 赵永庆1，李文鹏2，魏建峰2 127
高温变形参量对TC21钛合金组织与性能的影响 赵彦蕾1, 李伯龙1, 朱知寿2, 聂祚仁1 132
元素Ta对Ti-60A钛合金抗氧化性能的影响 朱绍祥，王清江，刘建荣，刘羽寅，杨 锐 138
TC1钛合金精锻棒材的拉伸性能及断口形貌 朱宝辉，胡晓晨，吴孟海，王培军，刘彦昌 144
TA15钛合金棒材的热连轧工艺 闵新华, 纪仁峰, 张玩良, 马伟东, 陆汉刚 148
TA15合金电子束嵌入法焊接接头的力学性能 李晋炜1, 2，唐振云2，郭光耀2，胡 伟1，张亦良1 152
第二相添加对7715D高温钛合金力学性能的影响 王敏敏，罗月新，计  波 156
Ti-6554钛合金的晶粒长大动力学 于  洋1，李成林1，惠松骁1，叶文君1，王韦琪2，张平辉2，羊玉兰2 161
TC17钛合金在热变形过程中的组织演变规律 徐  斌1，王晓英1，周建华1, 王凯旋2，曾卫东2 167
不同搭接间隙的电子束焊搭接接头的疲劳性能 吴  冰1, 2，巩水利2，唐振云2 173
氢对TA15钛合金微观组织的影响 刘  昕1, 2，赵秀娟3，巩水利2，雷永平1 178
TB10钛合金的焊接组织与性能 张  翥，于  洋，惠松骁，叶文君，尤振平 183
医用钛合金的微弧氧化膜层组织及其磨损性能 王艳玲，惠松骁，叶文君，米绪军 188
工艺、组织与性能
TiC颗粒增强钛基复合材料的高温变形行为 胡加瑞1，肖来荣1，罗  锴2，刘  彦1，李  威1，蔡一湘2 193
离心熔模精铸TiAl合金与ZrO2型壳的界面反应 陈艳飞，陈玉勇，田 竟，肖树龙，徐丽娟 198
SiCf/TC17复合材料的室温拉伸性能 张  旭，杨  青，王玉敏，雷家峰，杨  锐 203
热处理对Ti3Al基合金板材拉伸性能与微观组织的影响 曹京霞1，何书林2，石卫民2，王宏武2，王  新2 207
钛合金/铝合金搅拌摩擦焊接头的显微组织 陈玉华1，董春林2，倪  泉1，柯黎明1 211
Ti-23Al-17Nb合金锻制饼材的组织与性能 程云君，韩积亭，张建伟，梁晓波 215
3 mm厚钛/钢复合板低爆速炸药稳定爆轰的研究 关尚哲，刘润生，范江峰，张杭永，车龙泉，付光辉 219
热轧钛基复合材料的微观组织和力学性能 郭相龙，李九霄，王立强，覃继宁，吕维洁，张  荻 224
热处理对铸造Ti-23Al-17Nb合金组织和拉伸性能的影响 韩积亭，程云君，梁晓波，张建伟，李世琼 229
Ti-46Al-2Cr-4Nb-Y合金的高温变形及加工图 孔凡涛，张树志，陈玉勇 233
船用Ti-6Al-3Nb-2Zr合金的微弧氧化陶瓷膜 李兆峰，杨  瑞，胡光远，张建超 237
时效热处理对α挤压态TiAl合金显微组织的影响 刘  冬，刘仁慈，崔玉友，杨  锐 242
热挤压γ-TiAl基合金的组织演变 刘仁慈，刘  冬，崔玉友，杨  锐 248
惰性气体雾化法制备TiAl3粉末的特性 刘  辛，骆接文，谢焕文，蔡一湘 253
Ti-22Al-24Nb-1Mo O相合金箔材的加工与性能 卢  斌，王  永，杨  锐 257
低成本钛−铜金属复合型材的热挤压成形 倪沛彤，韩明臣，张英明，王成长，潘志强，朱梅生 260
复合溶胶−凝胶法制备TiAl合金表面防护涂层
及其高温抗氧化性能		 田  晓，贾  清，崔玉友，杨  锐 264
粉末冶金TiAl基合金高温变形行为及其本构模型 王  刚，徐  磊，崔玉友，杨  锐 269
Ti-47Al-2Cr-2Nb-0.2W-0.15B合金板材的制备
及其拉伸性能		 王  刚，徐  磊，崔玉友，杨  锐 274
热等静压制备Al2O3增强Ti2AlN金属陶瓷 郑  卓，崔玉友，杨  锐 280
钢-铝轧制复合界面化合物的抑制机理 王  平，谢佩佩 284
退火态Ti2AlNb合金板材的超塑性变形行为 王  新1，卢  斌2，王娟华1，王  俭1，王红武1，陈永辉1 289
(α2+O+B2)三相Ti3Al基合金的热变形行为 王  永，尹建明，卢  斌，杨  锐 293
粉末冶金TA7 ELI合金的制备及其界面反应层 邬  军，徐  磊，雷家峰，刘羽寅 299
粉末冶金钛合金的制备与力学性能 肖代红, 袁铁锤，贺跃辉，王守仁 303
机械合金化与放电等离子烧结制备
Ti-45Al-5.5(Cr, Nb, B, Ta)合金		 肖树龙1，于宏宝2，韩杰才3，徐丽娟1，陈玉勇1 309
包套锻造对Ti-45Al-5.4V-3.6Nb-0.3Y
合金组织和性能的影响		 杨  非1, 2，陈玉勇1，孔凡涛1，肖树龙1，徐丽娟1 315
热加工方式对双合金结合界面组织与力学性能的影响 YAO Ze-kun1, TAN Li-jun1, GUO Hong-zhen1, ZHANG Jian-wei2, LIANG Xiao-bo2 320
Ti2AlNb合金板材的电子束焊接 尹建明，卢 斌，李玉兰，杨 锐 325
变形率和热处理制度对Nb47Ti合金显微组织的影响 张 奕，郑永键，唐晓东，付宝全，王 虎，雷锦文 331
Ti3Al和Ti2AlNb基合金的研究与应用 张建伟，李世琼，梁晓波，程云君 336
热加工工艺技术
600 ℃时钛合金高温低循环疲劳行为及其微观机理 蔡建明1，张  华2，黄  旭1，曹春晓1 342
基于ABAQUS二次开发TC4线性摩擦焊过程的数值模拟 陈  亮，李文亚，马铁军，李京龙 348
Ti-Zr二元体系BCC相扩散移动性的评估 陈  逸1，钟  宏1，唐  斌1，崔予文2，李金山1，常  辉1，周  廉1 352
医用β-Ti30Nb13Zr0.5Fe合金的热变形行为 郭爱红，余  巍，张永强，朱雨生 357
TC11钛合金转子叶片断裂分析 何玉怀，刘昌奎，张  兵 365
钛合金置氢过程的氢分布规律 姜  波，侯红亮，王耀奇，李  红 369
铸态TB6钛合金热变形行为及本构关系 雷力明，黄  旭，黄利军，曹春晓 377
电子束冷床熔炼TC4钛合金连铸凝固过程数值模拟 雷文光，于兰兰，毛小南，罗   雷，张英明，侯智敏 381
ω相对Ti10V2Fe3Al合金性能的影响 李士凯，余  魏，廖志谦，闫飞昊，王美姣 387
钛合金大厚板窄间隙焊接接头三维应力数值模拟计算 廖志谦，刘希林，周  川，张建欣 393
合金化对β钛合金热膨胀系数的影响：第一性原理研究 罗湖斌，胡青苗，杨  锐 399
电子束冷床熔炼TC4合金温度场模拟 罗  雷1, 2，毛小南2，雷文光2，于兰兰2，杨冠军2 404
Ti3Zr2Sn3Mo25Nb医用钛合金相变与力学性能 麻西群，于振涛，牛金龙，余  森 410
影响TC4ELI合金断裂韧性的因素 马英杰1，王鼎春2，王红武2，雷家峰1，王  俭2，刘羽寅1，高  颀2，杨  锐1 414
电子束冷床熔炼工艺参数对TC4钛合金
Al元素挥发的影响		 毛小南，罗  雷，于兰兰，雷文光 419
铝热还原制备高钛铁的热力学和动力学 牛丽萍，张廷安，张含博，豆志河 425
Ti-15-3板材中晶界特征及其对疲劳裂纹萌生
与扩展的影响		 撒世勇1, 王 平2 429
TB6钛合金降温时温度场模拟及固态相变 邵  晖1, 2，葛  鹏2，赵永庆2，曾卫东1，王凯旋1，周  伟2，杨  义1 433
Ti60钛合金α相溶解动力学及固溶组织特征 孙  峰1，李金山1，寇宏超1，唐  斌1，常  辉1，蔡建明2，周  廉1 437
钛合金VAR过程电弧等离子体流场的数值模拟 孙来喜，薛祥义，杨治军，寇宏超，胡  锐，李金山 442
钛合金材料数据库系统的设计与开发 孙  宇1，曾卫东1，韩远飞1，邵一涛1，王腾飞1，赵永庆2 447
TC4叶片精锻过程中摩擦对模具应力及温度场的影响 汪  宇，刘郁丽，杨  合 452
α-Ti中a型位错的运动及相互作用的分子动力学模拟 王  皞，徐东生，杨  锐 457
Ti43.5Ni47.0Nb9.0Zr0.5合金的相变和记忆功能 王  健，张慧博，金  伟，刘羽寅 463
TC17钛合金片层组织动态球化的神经网络预测模型 王凯旋1, 2，曾卫东1，赵永庆2，徐  斌3，田  飞1，朱艳春1，张尧武1，周义刚1 468
TiNbTaZr合金在轧制过程中的马氏体转变 王立强，位倩倩，吕维洁，覃继宁，张  帆，张  荻 473
TB6合金热压缩流变应力行为 闫飞昊，李士凯，王美娇，杨  辉 478
Ni47Ti44Nb9形状记忆合金轧制板材的织构、相变和性能 颜  莹1，金  伟2，王  健2，周亭俊1 483
加载波形对Ti-60合金疲劳损伤行为的影响 杨丽娜，刘建荣，陈志勇，王清江，杨  锐 487
Ti-6Al-4V合金中α相颗粒溶解的相场模拟 杨  梅1，王  刚1,2，徐东生1，张  鉴3，杨  锐1，王云志4 491
Nb含量对Ti-Nb-0.7Ta-2Zr-1.4O合金
室温压缩流变行为的影响		 杨  义1, 2，李阁平1，吴松全1, 3，李玉兰1，杨  柯1 495
钛合金开坯锻造过程的有限元模拟 于德军1，柏春光1，徐东生1，李渭清2，何书林2，雷家峰1，刘羽寅1，杨  锐1 500
(α+β)两相钛合金显微组织的定量分析和表征 曾卫东1，王凯旋1，赵永庆2，周建华3，王晓英3，徐  斌3，周义刚1 505
TiNiFe形状记忆合金管接头应力场模拟 张慧博，王  健，金  伟，杨  锐 510
BTi-62421S合金高温变形流动应力模型 张慧芳1，张治民1，张  星1，李保成1，马鸿海2 514
Ti-24Nb-4Zr-8Sn合金疲劳缺口敏感性 张思倩，李述军，郝玉琳，杨  锐 518
TA15钛合金的相变、组织与拉伸性能 张旺峰，王玉会，李  艳，马济民 523
Ti-24Nb-4Zr-8Sn合金单晶纳米压痕研究 张晏玮，李述军，郝玉琳，杨  锐 528
Ti-26合金反挤压的热力耦合模拟 赵恒章，杨英丽，吴金平，赵  彬，奚正平 533
真空自耗电弧熔炼过程中电磁场的数值模拟 赵小花，李金山，常  辉，杨治军，寇宏超，胡  锐，周  廉 538
β钛中合金原子与间隙氧的相互作用及
氧在β钛合金中扩散的第一性原理研究		 祝令刚，胡青苗，杨  锐 544
Ti-75合金的正交设计与强化机制 那晓菲1，王卫民2，李  雷2 550
外科植入物用Ti6Al4V(ELI)合金棒材的成分、
组织和力学性能		 王卫民，林劭华，李  雷，曹继敏 555
Ti-6554钛合金的TTT曲线测定 李成林，于  洋，惠松骁，付艳艳 560
热处理工艺技术
冷却速率对Ti-5.8Al-3Mo-1Cr-2Sn-2Zr-1V-0.15Si
合金组织及性能的影响		 宋  淼，马英杰，邬  军，李玉兰，刘羽寅，雷家峰 565
等温精密锻造技术的研究进展 郭鸿镇1，姚泽坤1，虢迎光2，刘广义2，李园春3 570
双重退火温度对高应力水平TC11合金组织性能的影响 韩  栋1，毛小南1，张鹏省 1，周义刚2 577
固溶处理对近β锻TC21合金组织的影响 侯智敏，毛小南，雷文光，卢亚锋，张鹏省，韩  栋 581
TC18钛合金室温拉伸性能与热处理制度的关系 贾百芳1, 2，杨  义2，周  伟2，葛  鹏2，冯  亮2，杨冠军2 587
热处理对TG6合金热模锻件组织不均匀性的影响 王  涛，郭鸿镇，王彦伟，姚泽坤 593
BTi62钛合金退火温度与组织和性能的关系 陈秉刚，李渭清，董  洁，杨慧丽，张  辉，孙小勇 598
热机械处理对Ti-10V-2Fe-3Al钛合金组织和
性能的影响		 雷锦文1，曾卫东2，吴  欢3，杜予暄1，唐晓东1，庾高峰1，周义刚2，张  奕1 602
热处理对原位TiB和La2O3增强IMI834拉伸性能的影响 李九霄，王立强，覃继宁，陈一飞，吕维洁，张  荻 606
热处理对β锻造Ti-22Al-25Nb合金组织和性能的影响 梁晓波，程云君，张建伟，李世琼 611
固溶时效对TC4ELI钛合金组织和性能的影响 吕逸帆，张  毅，景宝全，吕建军 616
TB2钛合金的热加工与热处理工艺 罗斌莉，毛江虹，林海峰，曹继敏 620
Ti-6Al-4V合金棒材α层厚度的测定 邵  军，朱玉香 624
Ti-35Zr-10Nb合金板材的固溶处理与力学性能 王红武，樊柯利，王  俭，王小翔 627
退火温度对Ti80合金挤压管材组织与性能的影响 王巧莉，代  春，成小丽 631
热处理制度对TC18A钛合金丝材组织和性能的影响 王清瑞，沙爱学，黄  旭，刘  宇 634
热处理制度对TC4小棒材组织和性能的影响 王永哲，张  鹏，田  琳 638
不同变形量TA15钛合金的热处理行为 王玉会，李  艳，张旺峰，马济民 641
热处理温度对Ti-6Al-3Nb-2Zr-1Mo合金板材
显微组织和性能的影响		 文志刚，王韦琪，王小翔，李晓燕 647
焊接热循环对Ti35钛合金组织性能的影响 吴金平，杨英丽，赵恒章，赵  彬，奚正平 650
典型热处理工艺对Ti40合金蠕变性能的影响 辛社伟，赵永庆，李  倩，吴  欢，杨海瑛 654
2种制度热处理后Ti-600合金的高温蠕变行为 曾立英1, 2，杨冠军1，洪  权2，赵永庆2 659
热处理工艺对SP-700钛合金组织性能的影响 张  钢，张丰收 664
TB8超高强钛合金的热处理工艺 张利军1，田军强1，白  钰1，常  辉1, 2，薛祥义1, 2，张丰收3 670
大规格TC4钛合金丝材直径对固溶时效
显微组织和力学性能的影响		 张志强，董利民，关少轩，刘羽寅，杨  锐 674
热处理对7715D高温钛合金组织及力学性能的影响 陆  琪1, 2，罗月新2，计  波2 678
热处理对Ti-62A合金厚板组织及性能的影响 孙  明，叶文君，惠松骁，于  洋 681
冷却速度对VST55531钛合金的显微组织和力学性能的影响 付艳艳，惠松骁，叶文君，米绪军，于  洋 685
冷却速度对TC4钛合金动态断裂韧性的影响 刘  睿，惠松骁，叶文君，熊柏青，于  洋，付艳艳 690
热处理对ZTi600铸造钛合金组织与性能的影响 戚运莲，洪  权，卢亚锋, 杜  宇, 郭  萍，刘  伟，曾立英 695
金属间化合物与复合材料
变形历程对TA15钛合金等温局部近β锻微观组织的影响 刘  磊，孙志超，杨  合，樊晓光 699
扩径推弯弯头的重要工艺参数 陈  军，杨海瑛，段文森 704
Ti-1023合金d 350 mm棒材的锻造工艺 董  洁，王韦琪，李渭清，张  辉，王小龙，白文辉，田  莉 709
钛合金焊接接头残余应力的消除方法 符  浩，刘希林，卢  海，张  浩，李  宁 713
TA15合金的高强螺栓模锻成型工艺 付利国，朱雨生，赵彦营，焉国强 717
船用Ti31合金的活性化TIG焊接 高  瑞，孙耀峻，徐希军，郭  宁 722
Ti-1023钛合金改锻工艺优化 黄利军，齐立春，黄  旭 726
铁元素对钛合金焊缝组织和性能的影响 蒋  鹏，刘希林，闫飞昊，宋德军 730
TC11高颈法兰模具设计及成型工艺 李  炳，史  鑫，付利国，张志远，马艳霞 734
Ti80合金热压缩变形组织与加工图 李  梁，宋德军 738
CT20钛合金管材的冷弯成型 刘  伟，杜  宇，卢亚峰，毛小南，戚运连，郭  萍 743
TB19大厚板电子束焊接接头的组织性能 刘希林，杨  瑞，晏阳阳，王乃友，宋德军 748
热等静压和锻造对ZTC4组织及力学性能的影响 娄贯涛 753
超塑球形气瓶用TC4钛合金管材的制备工艺 那晓菲1，王卫民2，樊亚军2 ，李  雷2 756
TC18钛合金铸锭生产工艺 乔  璐，陈战乾，毛玲玲，冯雅奇，董燕妮，国  斌，杨国庆 761
TA15钛合金管材热加工工艺 尚秀丽，佟学文，晏小兵，冯红超，张耀斌，颜  苏，徐忠普，成小丽 765
BTi-62421S高温钛合金的热成形及超塑成形性能 史  科，郭晓琳，王猛团 770
TC11合金异型锻件锻造过程三维有限元数值模拟 万自永，余  巍，杨  瑞 775
TC4合金棒材的纵向微观组织 王建斌，胡宗式，邵  军，陶海林，薛虎明，周书成 780
Ti-1023合金铸锭的铁偏析 王孟光，周洪强，姜建伟 784
Ti-6Al-4V合金棒材纵向连轧的温度变化 王  田，陶海林，胡宗式，范  珂 789
700 ℃时高温高强BTi-6431S合金的组织与力学性能 王小翔，王韦琪，马鸿海 792
大型复杂ZTC4合金铸件充型凝固过程的模拟 王晓林1，赵志龙2，马余选1，张延生1，马海印3，马敏团4 796
600 ℃时高温钛合金(Ti60)的组织与力学性能 魏寿庸1，石卫民1，王鼎春1，王清江2，陈志勇2，刘建荣2 801
宽幅纯钛薄板的叠轧工艺 吴慧娟，容  耀，李向东，杨  哲，严学波，刘鹏聪 807
TC11钛合金棒材在α+β两相区的终锻变形 吴英彦，王万波，计  波 811
BTi62钛合金锻造工艺 杨慧丽1，李晓维2，羊玉兰1，马恩惠1，李冬梅1 815
TA15钛合金电子束焊接接头组织分析 姚  罡，李晋炜，陆业航，李众城 819
Ti5Mo5V2Cr3Al合金热变形行为 尤振平1，王  博2，惠松骁1，叶文君1，于  洋1，刘  睿1 822
TC4紧固件的疲劳断口 张  鹏1, 2，赖运金1, 2，王永哲1, 2，田  琳1, 2，朱燕丽1, 2 826
TC21钛合金电子束焊缝精细组织及其对硬度的影响 张秉刚1，王  廷1，陈国庆1，冯吉才1，李  东2 829
钛合金厚板焊接接头三维应力测试 张建欣1，王德全2，刘希林1，李  新1，郭洪涛1 833
低温用CT20钛合金的电子束焊接工艺 赵  彬，杨英丽，赵恒章，杜  宇，郭荻子 838
IMI834高温钛合金熔模铸造充型性能 赵而团，孔凡涛，肖树龙，陈艳飞，陈玉勇 843
Ti-55钛合金板材的超塑性变形行为 赵子博1，葛敬鲁1, 2，陈志勇1，王清江1，刘建荣1 847
Ti-5553合金的高温变形行为 周  伟，葛  鹏，赵永庆，李  倩，冯  亮，杨  义 852
钛合金型材挤压玻璃润滑工艺的有限元模拟 柏春光1，徐东生1，雷家峰1，刘羽寅1，徐  哲2，刘明辉2，吕培成2，段素杰3，杨  锐1 857
钛合金机匣精锻件等温锻造技术 孟庆通，庞克昌，周建华 862
低压力压制的圆形电极 胡宗式，李  渊，杨  萌 865
Ti-13Nb-13Zr钛合金VAR熔炼主组元的控制分析 牛中杰1, 2，杨冠军1，赵永庆2，曹继敏2，杨宏进2 868
应用、发展及综合
电子束冷床熔炼的优与劣 陈  峰，陈  丽，国  斌，彭  强，郭盛祥，毛玲玲 873
工业化冷床熔炼技术的引进与应用 秦桂红，王万波，计  波，吴英彦 877
钛在沸腾硝酸介质中腐蚀表面的分析 郭荻子，杨英丽，赵  彬，赵恒章 881
钛合金等离子焊后焊接接头超声消应工艺 郭小辉，柳  军，徐希军，贾晓飞 886
中国钛标准40年 黄永光 890
钛材热挤压成形技术的研究与发展 贾如雷1, 2，计  波2，吕维洁1，王宗宝2 897
真空热处理对冷喷涂多孔Ti组织与拉伸性能的影响 李文亚1，余  敏1，LIAO Han-lin2 902
变形钛及钛合金熔炼技术 李  雄1，庞克昌1，郭  华2，李红恩3 906
氮气气氛下激光切割对TC11钛合金组织及
焊接接头性能的影响		 刘昌奎，李  莹，何玉怀，陶春虎 914
粉末微注射技术的研究现状及其在钛合金零件
制备领域的应用		 骆接文，陈  强，蔡一湘 918
探头旋转式管材超声自动超声检测系统的研制 马小怀，江立新，王海良 923
TC18钛合金棒材组织与探伤的关系 乔恩利，冯永琦，李渭清，何书林 927
组合思想在钛合金研究中的应用与钛合金组合芯片的表征 秦冬阳，卢亚锋 930
光谱法分析TC11钛合金用标样化学成分控制 任春燕，李冬梅，张爱荣，毛  麒，赵芳利，苏海军 937
BT16钛合金沉头螺栓的加工工艺 沙爱学1，李兴无1，李红恩2，王清瑞1 942
Ti-75穿孔管坯的冷扩成形 苏航标，杨英丽，赵永庆，郭荻子，吴金平，赵恒章，赵  彬 945
TA2钛合金板的阳极氧化工艺 孙书英1，吴政道2，郭雪梅2，邓  超 950
生物医用Ti-Nb基合金的显微组织与耐磨性 王本力1，李  莉1，郑玉峰2 953
高强钛合金的发展与应用 王鼎春 958
超声波相控阵检测技术在钛合金厚板焊缝中的应用 王伏喜，周晓峰 ，鄂  楠，李  斌 964
造孔剂法制备多孔生物医用Ti2448合金 王玺涵1，李述军1, 贾明途1, 郝玉琳1, 杨  锐1, 郭正晓2 967
钛/钢复合板密封爆炸容器的设计与制造 文  潮，刘晓新，马艳军 972
高能球磨制备涂料用超细钛粉 谢焕文，蔡一湘，谭立新，刘  辛 977
沸腾氯化用高品质金红石的生产工艺 熊雪良，杨  智，欧阳红勇，王康海 981
牙科用Ti-Cr合金的显微组织及性能 徐丽娟1, 于宏宝2 , 黄玉东3, 肖树龙1, 陈玉勇1 986
高速压制技术成形Ti粉的过程 闫志巧，蔡一湘 992
TC4钛合金表面WC基耐磨涂层制备 杨伟华, 周海滨, 王  纯 997
我国舰船钛合金的研究进展 杨英丽，苏航标，郭荻子，赵  彬，吴金平，赵恒章，罗媛媛 1002
生物医用钛合金的微纳化加工技术及最新进展 于振涛1, 麻西群1, 余  森1, 张明华2, 韩建业1, 刘春潮1 1008
TC4钛合金紧固件的α污染层 张庆云，陆业航，李众城，李伟强 1013
钛及钛合金等通道转角挤压变形工艺研究现状 张永强，郭鸿镇，赵  严，王  涛，王彦伟，姚泽坤 1016
航空紧固件用钛合金的研究进展 赵庆云1, 徐  锋2 1021
小规格钛棒材成分偏析缺陷的超声波检测 毛江虹，王建淦，张  谊，曹继敏，肖松涛 1024
磷酸盐缓冲溶液中Ti-24Nb-4Zr-8Sn合金的电化学腐蚀行为 白  芸1，李述军1，郝玉琳1，杨  锐1，郭正晓2 1030
钛及钛合金在汽车上的应用 李  中 1034
表面加工状态对Ti-1023钛合金疲劳性能的影响 齐立春，黄利军，黄  旭，李志燕 1039
冷变形及退火参数对 CT20钛合金管材
组织和拉伸性能的影响		 杜  宇，郭荻子，刘  伟，戚运莲，卢亚峰 1045
TC18钛合金耳片的断口形貌及疲劳性能 刘翠云，李焕喜，马朝利 1050
SiC纤维增强Ti-Al金属间化合物基复合材料的界面反应 张  迪，孙彦波，赵业青，李焕喜，马朝利 1055
箔−箔法制备TiAlNb三元金属间化合物合金 赵业青，孙彦波，张  迪，马朝利 1060
箔−箔法制备微叠层Ti-Al系金属间化合物基合金板材 孙彦波，赵业青，张  迪，马朝利 1064
热处理制度对Ti-1300合金组织和力学性能的影响 葛  鹏，周  伟，赵永庆 1068

The Chinese Journal of Nonferrous Metals

中国有色金属学报

Vol. 20    Special 1    October 2010


Theories and Basic Researches
Influence of precipitated phase on hardness of Ti-10Cr alloy FENG Liang, GE Peng, YANG Yi, ZHOU Wei 1
Influence of hot rolling deformation on microstructure and
texture of TB-13 alloy		 FEI Yue, CHANG Hui, TANG Bin, KOU Hong-chao, ZHU Zhi-shou, SHANG Guo-qiang, ZHOU Lian 6
Effect of microstructure on creep deformation behavior of near-alpha titanium alloy TG6 DUAN Rui, ZHANG Hua, CAI Jian-ming, HUANG Xu, CAO Chun-xiao 11
Influence of lamellar microstructure feature on
fracture toughness of TC21 alloy		 DANG Wei, XUE Xiang-yi, LI Jin-shan, HU Rui, ZHU Zhi-shou, ZHANG Feng-shou, ZHOU Lian 16
Basic research for TA15 titanium alloy with return charge DING Chang-qin, GAO Bo, WEI Shou-yong, HE Shu-lin, CHEN Zhan-qian, MA Ying, LIU Yan-rong 21
Effects of forging technics on performance of TC10 titanium alloy stick CHEN Guo-cai, YANG Wen-jia, CHEN Su, CHAO Lei 25
Analysis of mechanical properties of Ti6Al4V wire
produced by roll-die drawing		 FAN Ke, TAO Hai-lin, ZHOU Shu-cheng, WANG Jian-bin, WANG Tian 28
Continuous cooling transformation diagram and
 microstructure evolution of Ti-55 alloy		 FANG Bo, CHEN Zhi-yong, CHEN Zhong-qiang, LIU Jun-he, WANG Qing-jiang, LIU Yan, FENG Zhen-wei, LIU Jian-rong 32
Mechanical properties of Ti600 high temperature titanium alloy GUO Ping, HONG Quan, ZHAO Yong-qing, QI Yun-lian, XIN She-wei, LIU wei 36
Effects of deformation parameters on microstructures and
mechanical properties of TA15 alloy plate		 GUO Zhi-jun, WANG Jian, WANG Hong-wu 40
Relationship between microstructure and damage tolerance of
TA15 titanium alloy		 HE Shu-lin, LEI Xiao-jun, WANG Xiao-xiang, MA Ying-jie, WANG Xi-zhe, WANG Ding-chun 43
Microstructure and mechanical property of narrow-gap TIG welding joint of titanium alloys thick plate HU Wei-min, LI Guo-lin, LIU Xi-lin, ZHANG Jian-xin, WANG Gang 48
Relationship between fatigue limit and tensile strength of
Ti-1023 titanium alloys		 HUANG Li-jun, QI Li-chun, LIU Chang-kui, LIU De-lin, HUANG Xu 54
Microstructures and mechanical properties of
commercial purity Ti rolled at room temperature		 JIANG Jian-hua, DING Yi, SHAN Ai-dang 58
Effects of heat treatment on high cycle fatigue strength of TA15 alloy LAI Yun-jin, ZHANG Feng-shou, DU Yu-xuan, HOU Yan-rong, WANG Yong-zhe, MA Wen-ge, LIU Xiang-hon 62
Microstructures and mechanical properties of
TA7 alloy sheet produced by pack ply-rolling process		 PANG Hong, ZHANG Hai-long, WANG Xi-zhe, WU Kai, CHENG Dong 66
Property evaluation of Ti-45Nb alloy wires used in fastener SHANG Guo-qiang, WANG Xin-nan, TANG Bin, ZHU Zhi-shou, KOU Hong-chao, ZHANG Feng-shou, CHANG Hui 70
Microstructures and mechanical properties of
Ti60 Ti alloy large-section bars		 SHI Wei-min, WEI Shou-yong, WANG Ding-chun, LI Wei-qing, WANG Qing-jiang, LIU Jian-rong 75
Effect of forging temperature on mechanical property and microstructure of TC4-DT titanium SHI Xiao-yun, FU Bao-quan, WANG Wen-sheng, TANG Xiao-dong, CHEN Xiao-miao 79
Elevated temperature deformation mechanism of Ti2448 alloy at different strain rates TIAN Yu-xing, LI Shu-jun, HAO Yu-lin, YANG Rui 83
Influence factors of microstructure and property of TC4-DT titanium alloy free forgings TONG Lu, ZHU Zhi-shou, YU Han-qing, WANG Zhi-lu 87
Microstructure and properties of superplastic plate of Ti-55 alloy WANG Juan-hua, WANG Hong-wu, CHEN Zhi-yong, CHEN Yong-hui, WANG Xin, ZHANG Lei, HE Jun, TIAN Li 91
Hot deformation behavior and microstructure globularization of TA15 with lamellar structure WU Cheng-bao, YANG He, SUN Zhi-chao, FAN Xiao-guang 94
Effect of process routes on mechanical properties and
microstructure of Ti5553 isothermal forgings		 XU Feng, JI Bo, ZHU Yi-fan, LUO Yue-xin, PENG Ke-chang 100
Effect of hot working process on microstructure and properties of BTi-6431S titanium alloy plate YANG Wei , WANG Jian, WANG Hong-wu, DONG Zhen-jian, WANG Xiao-xiang, WANG Wei-qi 104
Effects of cold and hot upset on microstructures and properties of
TC16 titanium alloy		 YANG Yang, DONG Li-min, GUAN Shao-xuan, LIU Yu-yin, YANG Rui 107
Effect of hot deformation parameters on microstructures and
 properties of BTi−62421S alloy		 ZHANG Hui-fang, ZHANG Zhi-min, ZHANG Xing, LI Bao-cheng, MA Hong-hai 113
Influence of thermo-hydrogenation treatment on
microstructure and properties of Ti600 titanium alloy		 ZHANG Peng-sheng, ZHAO Yong-qing, MAO Xiao-nan, HONG Quan, HAN Dong 118
Microstructure and mechanical properties of
warm-swaged Ti2448 alloy		 ZHANG Zhen-bo, LI Shu-jun, HAO Yu-lin, YANG Rui, GUO Zheng-xiao 123
Effect of thermal cycling temperature on microstructures
and mechanical properties of Ti-6Al-4V alloy		 ZHAO Yong-qing, LI Wen-peng, WEI Jian-feng 127
Influence of high temperature deformation parameters on
microstructure and properties of TC21 titanium alloy		 ZHAO Yan-lei, LI Bo-long, ZHU Zhi-shou, NIE Zuo-ren 132
Effect of Ta on oxidation resistance behavior of
Ti-60A titanium alloys		 ZHU Shao-xiang, WANG Qing-jiang, LIU Jian-rong, LIU Yu-yin, YANG Rui 138
Tensile properties and fractographs of finish forged bar of
TC1 titanium alloy		 ZHU Bao-hui, HU Xiao-chen, WU Meng-hai, WANG Pei-jun, LIU Yan-chang 144
Hot continuous rolling process of TA15 titanium alloy MIN Xin-hua, JI Ren-feng, ZHANG Wan-liang, MA Wei-dong, LU Han-gang 148
Mechanical properties of TA15 titanium alloy weld-joints by
embedded electron beam weld		 LI Jin-wei , TANG Zhen-yun , GUO Guang-yao, HU Wei , ZHANG Yi-liang 152
Effect of second phase addition on mechanical properties of
7715D high temperature titanium alloy		 WANG Min-min, LUO Yue-xin, JI Bo 156
Grain growth dynamics of Ti-6554 titanium alloy YU Yang, LI Cheng-lin, HUI Song-xiao, YE Wen-jun, WANG Wei-qi, ZHANG Ping-hui, YANG Yu-lan 161
Microstructure evolvement regularity of TC17 titanium alloy in
hot deformation		 XU Bin, WANG Xiao-yin, ZHOU Jian-hua, WANG Kai-xuan, ZENG Wei-dong 167
Fatigue properties of electron beam welding overlap joints with
 different overlap gaps		 WU Bing, GONG Shui-li, TANG Zhen-yun 173
Influence of hydrogen on microstructure of TA15 titanium alloy LIU Xin, ZHAO Xiu-juan, GONG Shui-li, LEI Yong-ping 178
Microstructure and mechanical properties of
TB10 titanium alloy after welding		 ZHANG Zhu, YU Yang, HUI Song-xiao, YE Wen-jun, YOU Zhen-ping 183
Microstructure and its wear property of micro-arc oxidation
coating on biomedical titanium alloy		 WANG Yan-ling, HUI Song-xiao, YE Wen-jun, MI Xu-jun 188
Technologies, Microstructures and
Hot deformation behavior of
titanium based matrix composites reinforced by TiC particulates		 HU Jia-rui, XIAO Lai-rong, LUO Kai, LIU Yan, LI Wei, CAI Yi-xiang 193
Interfacial reactions between TiAl alloys and ZrO2 mould under centrifugal investment casting conditions CHEN Yan-fei, CHEN Yu-yong, TIAN Jing, XIAO Shu-long, XU Li-juan 198
Tensile property of SiCf/TC17 composite at room temperature ZHANG Xu, YANG Qing, WANG Yu-min, LEI Jia-feng, YANG Rui 203
Effect of heat treatment on tensile properties and
 microstructures of Ti3Al based alloy sheet		 CAO Jing-xia, HE Shu-lin, SHI Wei-min, WANG Hong-wu, WANG Xin 207
Microstructure of friction stir welding joint between
titanium and aluminum dissimilar alloys		 CHEN Yu-hua, DONG Chun-lin, NI Quan, KE Li-ming 211
Microstructure and properties of Ti-23Al-17Nb alloy forging disk CHENG Yun-jun, HAN Ji-ting, ZHANG Jian-wei, LIANG Xiao-bo 215
Study on detonation velocity stability of 3 mm-thickness titanium/steel clad plate with low detonation loading explosive GUAN Shang-zhe, LIU Run-sheng, FAN Jiang-feng, ZHANG Hang-yong, CHE Long-quan, FU Guang-hui 219
Microstructure and mechanical properties of hot-rolled titanium matrix composite GUO Xiang-long, LI Jiu-xiao, WANG Li-qiang, QIN Ji-ning, LÜ, Wei-jie, ZHANG Di 224
Effect of heat treatment on microstructure and tensile properties
of cast Ti-23Al-17Nb alloy		 HAN Ji-ting, CHENG Yun-jun, LIANG Xiao-bo, ZHANG Jian-wei, LI Shi-qiong 229
Hot deformation and processing map of Ti-46Al-2Cr-4Nb-Y alloy KONG Fan-tao, ZHANG Shu-zhi, CHEN Yu-yong 233
Micro-arc oxidation ceramic coatings formed on
 marine Ti-6Al-3Nb-2Zr alloy		 LI Zhao-feng, YANG Rui, HU Guang-yuan, ZHANG Jian-chao 237
Effect of aged-heat treatment on microstructure of
 α extruded TiAl alloy		 LIU Dong, LIU Ren-ci, CUI Yu-you, YANG Rui 242
Microstructure evolution of hot extruded γ-TiAl based alloy LIU Ren-ci, LIU Dong, CUI Yu-you, YANG Rui 248
Characteristics of TiAl3 powder prepared by inert gas atomization LIU Xin, LUO Jie-wen, XIE Huan-wen, CAI Yi-xiang 253
Processing and properties of Ti-22Al-24Nb-1Mo orthorhombic alloy foil LU Bin, WANG Yong, YANG Rui 257
Hot extrusion forming of low-cost Ti-Cu clad rod NI Pei-tong, HAN Ming-chen, ZHANG Ying-ming, WANG Cheng-zhang, PAN Zhi-qiang, ZHU Mei-sheng 260
Preparation and high-temperature anti-oxidation property of
protection coatings on γ-TiAl alloys by composite sol-gel method		 TIAN Xiao, JIA Qing, CUI Yu-you, YANG Rui 264
High temperature deformation behavior of
powder metallurgy TiAl alloy and its constitutive model		 WANG Gang, XU Lei, CUI Yu-you, YANG Rui 269
Fabrication and tensile property of
Ti-47Al-2Cr-2Nb-0.2W-0.15B alloy sheets		 WANG Gang, XU Lei, CUI Yu-you, YANG Rui 274
Ti2AlN cermet enhanced by Al2O3 prepared by
hot isostatic pressing		 ZHENG Zhuo, CUI Yu-you, YANG Rui 280
Restraining mechanism of compound of
steel-aluminum rolling bonding composite board		 WANG Ping, XIE Pei-pei 284
Superplastic deformation behavior of annealed Ti2AlNb alloy sheet WANG Xin, LU Bin, WANG Juan-hua, WANG Jian, WANG Hong-wu, CHEN Yong-hui 289
Hot deformation behaviour of
(α2+O+B2) three phases Ti3Al-based alloy		 WANG Yong, YIN Jian-ming, LU Bin, YANG Rui 293
Preparation of powder metallurgy TA7 ELI alloy and
its interface reaction layer		 WU Jun, XU Lei, LEI Jia-feng, LIU Yu-yin 299
Synthesis and mechanical properties of
powder metallurgy titanium alloy		 XIAO Dai-hong, YUAN Tie-chui, HE Yue-hui, WANG Shou-ren 303
Preparation of Ti-45Al-5.5(Cr, Nb, B, Ta) alloy by
mechanical milling and spark plasma sintering		 XIAO Shu-long, YU Hong-bao, HAN Jie-cai, XU Li-juan, CHEN Yu-yong 309
Effect of canned-forging on microstructure and properties of Ti-45Al-5.4V-3.6Nb-0.3Y alloy YANG Fei, CHEN Yu-yong, KONG Fan-tao, XIAO Shu-long, XU Li-juan 315
Effect of hot working method on interfacial microstructures
and mechanical properties of dual alloy		 YAO Ze-kun, TAN Li-jun, GUO Hong-zhen, ZHANG Jian-wei, LIANG Xiao-bo 320
Electron beam welding of Ti2AlNb based alloy sheet YIN Jian-ming, LU Bin, LI Yu-lan, YANG Rui 325
Effect of deformation rate and heat treatment on
microstructure of Nb47Ti alloy		 ZHANG Yi, ZHENG Yong-jian, TANG Xiao-dong, FU Bao-quan, WANG Hu, LEI Jin-wen 331
Research and application of Ti3Al and Ti2AlNb based alloys ZHANG Jian-wei, LI Shi-qiong, LIANG Xiao-bo, CHENG Yun-jun 336
Hot Working Technologies
High temperature low cycle fatigue behavior and
its micro-mechanism of titanium alloy at 600 ℃		 CAI Jian-ming, ZHANG Hua, HUANG Xu, CAO Chun-xiao 342
Numerical simulation of secondary development TC4 titanium alloy
based on ABAQUS software during linear friction welding		 CHEN Liang, LI Wen-ya, MA Tie-jun, LI Jing-long 348
Assessment of diffusional mobilities of BCC phase in Ti-Zr alloys CHEN Yi, ZHONG Hong, TANG Bing, CUI Yu-wen, LI Jin-shan, CHANG Hui, ZHOU Lian 352
Hot deformation behaviors of biomedical β-Ti30Nb13Zr0.5Fe alloy GUO Ai-hong, YUE Wei, ZHANG Yong-qiang, ZHU Yu-sheng 357
Fracture analysis of rotor blade of titanium alloy TC11 HE Yu-huai, LIU Chang-kui, ZHANG Bing 365
Hydrogen distribution of hydrogen
treatment process for titanium alloy		 JIANG Bo, HOU Hong-liang, WANG Yao-qi, LI Hong 369
Hot deformation behavior and constitutive relationship of
 as-cast TB6 alloy		 LEI Li-ming, HUANG Xu, HUANG Li-jun, CAO Chun-xiao 377
Numerical simulation of continuous casting solidification
process of TC4 titanium alloy during EBCHM		 LEI Wen-guang, YU Lan-lan, MAO Xiao-nan, LUO Lei, ZHANG Ying-ming, HOU Zhi-ming 381
Effects of ω phase on properties of Ti10V2Fe3Al alloy LI Shi-kai, YU Wei, LIAO Zhi-qian, YAN Fei-hao, WANG Mei-jiao 387
Numerical simulation about three dimensional stress in
titanium alloy heavy plate of narrow gap welded joint		 LIAO Zhi-qian, LIU Xi-lin, ZHOU Chuan, ZHANG Jian-xin 393
Effect of alloying on thermal expansion efficient of β titanium alloy:
First principles study		 LUO Hu-bin, HU Qing-miao, YANG Rui 399
Temperature field simulation of electron beam
cold hearth melting TC4 alloy		 LUO Lei, MAO Xiao-nan, LEI Wen-guang, YU Lan-lan, YANG Guan-jun 404
Phase transformation and mechanical properties of Ti3Zr2Sn3Mo25Nb alloy for biomedical application MA Xi-qun, YU Zhen-tao, NIU Jin-long, YU Sen 410
Factors influencing fracture toughness of TC4ELI alloy MA Ying-jie, WANG Ding-chun, WANG Hong-wu, LEI Jia-feng, WANG Jian, LIU Yu-yin, GAO Qi, YANG Rui 414
Effects of melting process parameters of electron beam cold hearth on
Al element evaporation in TC4 titanium alloy		 MAO Xiao-nan, LUO Lei, YU Lan-lan, LEI Wen-guang 419
Thermodynamics and kinetics of preparation of
high titanium ferroalloy by thermite reaction		 NIU Li-ping, ZHANG Ting-an, ZHANG Han-bo, DOU Zhi-he 425
Grain boundary characterization and its influence on
fatigue crack initiation and propagation in Ti-15-3 sheet		 SA Shi-yong , WANG Ping 429
Temperature field simulation and solid-solid phase transition during
cooling process for TB6 Ti alloy		 SHAO Hui, GE Peng, ZHAO Yong-qing, ZENG Wei-dong, WANG Kai-xuan, ZHOU Wei, YANG Yi 433
α phase solution kinetics and solution microstructure characteristics of Ti60 titanium alloy SUN Feng, LI Jin-shan, KOU Hong-chao, TANG Bin, CHANG Hui, CAI Jian-ming, ZHOU Lian 437
Numerical simulation of arc plasma fluid field in
VAR process for titanium alloy		 SUN Lai-xi, XUE Xiang-yi, YANG Zhi-jun, KOU Hong-chao, HU Rui, LI Jin-shan 442
Design and development of database system for titanium alloys SUN Yu, ZENG Wei-dong, HAN Yuan-fei, SHAO Yi-tao, WANG Teng-fei, ZHAO Yong-qing 447
Influence of friction on stress and temperature fields of
 die in TC4 blade forging process		 WANG Yu, LIU Yu-li, YANG He 452
Molecular dynamics simulations of glide and interaction of
a-type dislocations in α-titanium		 WANG Hao, XU Dong-sheng, YANG Rui 457
Phase transformation and memory function of
Ti43.5Ni47.0Nb9.0Zr0.5 alloy		 WANG Jian, ZHANG Hui-bo, JIN Wei, LIU Yu-yin 463
ANN model for prediction of dynamic globularization in
TC17 titanium alloy		 WANG Kai-xuan, ZENG Wei-dong, ZHAO Yong-qing, XU Bin, TIAN Fei,ZHU Yan-chun, ZHANG Yao-wu, ZHO 468
Martensite phase transformation of TiNbTaZr alloy during cold rolling WANG Li-qiang, WEI Qian-qian, LU Wei-jie, QIN Ji-ning, ZHANG Fan, ZHANG Di 473
Flow stress behavior of TB6 titanium alloy during
hot compression deformation at elevated temperature		 YAN Fei-hao, LI Shi-kai, WANG Mei-jiao, YANG Hui 478
Texture, transition and properties of
rolled Ni47Ti44Nb9 shape memory alloy sheet		 YAN Ying, JIN Wei, WANG Jian, ZHOU Ting-jun 483
Effect of loading waveform on fatigue damage behavior of Ti-60 alloy YANG Li-na, LIU Jian-rong, CHEN Zhi-yong, WANG Qing-jiang, YANG Rui 487
Simulation of dissolution of α particles in Ti-6Al-4V alloy by
3D phase field model		 YANG Mei, WANG Gang, XU Dong-sheng, ZHANG Jian, YANG Rui, WANG Yun-zhi 491
Effect of Nb content on flow behavior of
Ti-Nb-0.7Ta-2Zr-1.4O alloy during cold compression		 YANG Yi, LI Ge-ping, WU Song-quan, LI Yu-lan, YANG Ke 495
FEM simulation of forging of Ti alloy YU De-jun, BAI Chun-guang, XU Dong-sheng, LI Wei-qing, HE Shu-lin, LEI Jia-feng, LIU Yu-yin, YANG Rui< 500
Quantification of microstructural features in (α+β) titanium alloys ZENG Wei-dong, WANG Kai-xuan, ZHAO Yong-qing, ZHOU Jian-hua, WANG Xiao-ying, XU Bin, ZHOU Yi-gang 505
Coupling force simulation of TiNiFe shape memory alloy pipe-coupling ZHANG Hui-bo, WANG Jian, JIN Wei, YANG Rui 510
Constitutive model of flow stress for high temperature deformation
of BTi-62421S alloy		 ZHANG Hui-fang, ZHANG Zhi-min, ZHANG Xing, LI Bao-cheng, MA Hong-hai 514
Fatigue notch sensitivity of Ti-24Nb-4Zr-8Sn alloy ZHANG Si-qian, LI Shu-jun, HAO Yu-lin, YANG Rui 518
Phase transformation, microstructures and tensile properties of TA15 titanium alloy ZHANG Wang-feng, WANG Yu-hui, LI Yan, MA Ji-min 523
Nanoindentation study on Ti-24Nb-4Zr-8Sn single crystals ZHANG Yan-wei, LI Shu-jun, HAO Yu-lin, YANG Rui 528
Simulation of coupled thermo-mechanical behavior of
Ti-26 titanium alloy during back-extrusion		 ZHAO Heng-zhang, YANG Ying-li, WU Jin-ping, ZHAO Bin, XI Zheng-ping 533
Numerical simulation of electromagnetic field in
vacuum arc remelting process		 ZHAO Xiao-hua, LI Jin-shan, CHANG Hui, YANG Zhi-jun, KOU Hong-chao, HU Rui, ZHOU Lian 538
Interaction between alloying atoms and oxygen and diffusion of oxygen in β-Ti alloy investigated by first-principles methods ZHU Ling-gang, HU Qing-miao, YANG Rui 544
Orthogonal design and strengthening mechanism of Ti-75 alloy NA Xiao-fei, WANG Wei-min, LI Lei 550
Composition, microstructure and mechanical properties of
Ti6Al4V(ELI) alloy bars for surgical implants		 WANG Wei-min, LIN Shao-hua, LI Lei, CAO Ji-min 555
Determination of TTT curve of Ti-6554 titanium alloy LI Cheng-lin, YU Yang, HUI Song-xiao, FU Yan-yan 560
Heat Treatment Technologies
Effect of cooling rate on microstructure and properties of Ti-5.8Al-3Mo-1Cr-2Sn-2Zr-1V-0.15Si alloy SONG Miao, MA Ying-jie, WU Jun, LI Yu-lan, LIU Yu-yin, LEI Jia-feng 565
Research progress of isothermal precision forging technology GUO Hong-zhen, YAO Ze-kun, GUO Ying-guang, LIU Guang-yi, LI Yuan-chun 570
Effect of double annealing temperature on microstructure and
mechanical properties of TC11 alloy		 HAN Dong, MAO Xiao-nan, ZHANG Peng-sheng, ZHOU Yi-gang 577
Effect of solution treatment on
morphology of near β forged TC21 alloy		 HOU Zhi-min, MAO Xiao-nan, LEI Wen-guang, LU Ya-feng, ZHANG Peng-sheng, HAN Dong 581
Relationship between heat treatment process and
room-temperature tensile properties of TC18 titanium alloy		 JIA Bai-fang, YANG Yi, ZHOU Wei, GE Peng, FENG Liang, YANG Guan-jun 587
Effects of heat treatment on microstructural inhomogeneity of
TG6 alloy hot die forgings		 WANG Tao, GUO Hong-zhen, WANG Yan-wei, YAO Ze-kun 593
Relationship between annealing temperature and
microstructure and properties of BTi62 titanium alloy		 CHEN Bing-gang, LI Wei-qing, DONG Jie, YANG Hui-li, ZHANG hui, SUN Xiao-yong 598
Effects of mechanical heat-treatment on microstructure and
properties of Ti-10V-2Fe-3Al alloy		 LEI Jin-wen, ZENG Wei-dong, WU Huan, DU Yu-xuan, TANG Xiao-dong, YU Gao-feng, ZHOU Yi-gang, ZHANG Yi 602
Effect of heat treatment on tensile properties of
in situ synthesized (TiB+La2O3)/Ti composite		 LI Jiu-xiao, WANG Li-qiang, QIN Ji-ning, CHEN Yi-fei, LÜ, Wei-jie, ZHANG Di 606
Effects of heat treatment on microstructure and
properties of β-forged Ti-22Al-25Nb alloy		 LIANG Xiao-bo, CHENG Yun-jun, ZHANG Jian-wei, LI Shi-qiong 611
Effects of solution treatment on microstructure and
properties of TC4ELI titanium alloy		 LÜ, Yi-fan, ZHANG Yi, JING Bao-quan, LÜ, Jian-jun 616
Heat processing and treatment technology of TB2 titanium alloy LUO Bin-li, MAO Jiang-hong, LIN Hai-feng, CAO Ji-min 620
Determination of α-layer thickness for Ti-6Al-4V alloy bar SHAO Jun, ZHU Yu-xiang 624
Solution treatment and mechanical properties of
Ti-35Zr-10Nb alloy plate		 WANG Hong-wu, FAN Ke-li, WANG Jian, WANG Xiao-xiang 627
Effect of annealing temperature on microstructure and
properties of Ti80 alloy extrusion tube		 WANG Qiao-li, DAI Chun, CHENG Xiao-li 631
Influence of heat treatment process on microstructure and
mechanical property of TC18A alloy wire		 WANG Qing-rui, SHA Ai-xue, HUANG Xu, LIU Yu 634
Effect of heat treatment on microstructure and
performance of TC4 bars		 WANG Yong-zhe, ZHANG Peng, TIAN Lin 638
Heat treatment behavior of TA15 titanium alloy with
different deformation degrees		 WANG Yu-hui, LI Yan, ZHANG Wang-feng, MA Ji-min 641
Effects of heat treatment temperature on microstructure and
mechanical properties of Ti-6Al-3Nb-2Zr-1Mo alloy plate		 WEN Zhi-gang, WANG Wei-qi, WANG Xiao-xiang, LI Xiao-yan 647
Effect of simulated welding thermal cycle on microstructure and
 properties of Ti35 alloy		 WU Jin-ping, YANG Ying-li, ZHAO Heng-zhang, ZHAO Bin, XI Zheng-ping 650
Effects of typical heat treatments on creep properties of Ti40 alloy XIN She-wei, ZHAO Yong-qing, LI Qian,WU Huan, YANG Hai-ying 654
High temperature creep behaviors of Ti-600 alloy by
 two thermal treatments		 ZENG Li-ying, YANG Guan-jun, HONG Quan, ZHAO Yong-qing 659
Effect of heat treatment process on structures and properties of
 SP-700 titanium alloy		 ZHANG Gang, ZHANG Feng-shou 664
Heat treatment process of TB8 titanium alloy ZHANG Li-jun, TIAN Jun-qiang, BAI Yu, CHANG Hui, XUE Xiang-yi, ZHANG Feng-shou 670
Effects of diameter on microstructure and mechanical properties of large-size TC4 titanium alloy wires in solution treated and
 aged condition		 ZHANG Zhi-qiang, DONG Li-min, GUAN Shao-xuan, LIU Yu-yin, YANG Rui 674
Effects of heat treatment on microstructures and mechanical properties of 7715D high temperature titanium alloys LU Qi, LUO Yue-xin, JI Bo 678
Effects of heat treatment on microstructures and tensile
properties of Ti-62A alloy plate		 SUN Ming, YE Wen-jun, HUI Song-xiao, YU Yang 681
Effects of cooling rate on microstructure and properties of VST55531 alloy FU Yan-yan, HUI Song-xiao, YE Wen-jun, MI Xu-jun, YU Yang 685
Effects of cooling rate on dynamic fracture toughness for
 TC4 titanium allo		 LIU Rui, HUI Song-xiao, YE Wen-jun, XIONG Bai-qing, YU Yang, FU Yan-yan 690
Effects of heat treatment conditions on microstructures and properties of ZTi600 cast titanium alloy QI Yun-lian, HONG Quan, LU Ya-feng, DU Yu, GUO Ping, LIU Wei, ZENG Li-ying 695
Intermetallics and Composit
Effects of processing history on microstructure of TA15 alloys
during isothermal local loading near β forging		 LIU Lei, SUN Zhi-chao, YANG He, FAN Xiao-guang 699
Important technology parameters of elbow made by
diameter-expanding and pushing		 CHEN Jun, YANG Hai-ying, DUAN Wen-sen 704
Forging process of d 350 mm bars of Ti-1023 alloy DONG Jie, WANG Wei-qi, LI Wei-qing, ZHANG Hui, WANG Xiao-long, BAI Wen-hui, TIAN Li 709
Relieving residual stress of titanium alloy welded joint FU Hao, LIU Xi-lin, LU Hai, ZHANG Hao, LI Ning 713
Die-forging of TA15 alloy high-strength bolt FU Li-guo, ZHU Yu-sheng, ZHAO Yan-ying, YAN Guo-qiang 717
Activating flux TIG of Ti31 titanium alloys for shipbuilding GAO Rui, SUN Yao-jun, XU Xi-jun, GUO Ning 722
Deformation process optimization of Ti-1023 titanium alloy HUANG Li-jun, QI Li-chun, HUANG Xu 726
Effect of Fe element on microstructure and properties
of titanium alloy welding seam		 JIANG Peng, LIU Xi-lin, YAN Fei-hao, SONG De-jun 730
Die design and forming technique of TC11 alloy LI Bing, SHI Xin, FU Li-guo, ZHANG Zhi-yuan, MA Yan-xia 734
Microstructure and processing map of hot compressing
deformation of Ti80 alloy		 LI Liang, SONG De-jun 738
Cold bending of CT20 titanium alloy tubes LIU Wei, DU Yu , LU Ya-feng, MAO Xiao-nan, QI Yun-lian, GUO Ping 743
Structural properties of TB19 heavy plate welded
by electron beam welding		 LIU Xi-lin, YANG Rui, YAN Yang-yang, WANG Nai-you, SONG De-jun 748
Influence of HIP and forging on microstructure and
mechanical properties of ZTC4 cast titanium alloy		 LOU Guan-tao 753
Preparation technique of TC4 alloy pipe used for superplastic gas bottle NA Xiao-fei, WANG Wei-min, FAN Ya-jun, LI Lei 756
Melting process of TC18 titanium alloy ingot QIAO Lu, CHEN Zhan-qian, MAO Ling-ling, FENG Ya-qi, DONG Yan-ni, GUO Bin, YANG Guo-qing 761
Hot extrusion process of TA15 titanium alloy tube SHANG Xiu-li, TONG Xue-wen, YAN Xiao-bing, FENG Hong-chao, ZHANG Yao-bing,YAN Su, XU Zhong-pu, CHENG Xiao-li 765
Hot forming and superplastic forming performance of
high-temperature BTi-62421S titanium alloy		 SHI Ke, GUO Xiao-lin, WANG Meng-tuan 770
3D FEM numerical simulation of forging process of
TC11 titanium alloy complicated forge		 WAN Zi-yong, YU Wei, YANG Rui 775
Longitudinal microstructures of Ti-6Al-4V alloy bars WANG Jian-bin, HU Zong-shi, SHAO Jun, TAO Hai-lin, XUE Hu-ming, ZHOU Shu-cheng 780
Iron segregation of Ti-1023 titanium ingots WANG Meng-guang, ZHOU Hong-qiang, JIANG Jian-wei 784
Temperature shift of Ti-6Al-4V alloy bars in continuous rolling WANG Tian, TAO Hai-lin, HU Zong-shi, FAN Ke 789
Microstructure and mechanical properties of high temperature and high strength BTi-6431S alloy at 700 ℃ WANG Xiao-xiang, WANG Wei-qi, MA Hong-hai 792
Simulation of filling and solidification processing of
large complex ZTC4 castings		 WANG Xiao-lin, ZHAO Zhi-long, MA Yu-xuan, ZHANG Yan-sheng, MA Hai-yin, MA Min-tuan 796
Microstructure and mechanical properties of
 high temperature titanium alloy Ti60 at 600 ℃		 WEI Shou-yong, SHI Wei-min, WANG Ding-chun, WANG Qing-jiang, CHEN Zhi-yong, LIU Jian-rong 801
Rolling process of wide titanium sheet ply WU Hui-juan, RONG Yao, LI Xiang-dong, YANG Zhe, YAN Xue-bo, LIU Peng-, cong 807
Final wrought deformation of TC11 titanium alloy in (α+β) phase WU Ying-yan, WANG Wan-bo, JI Bo 811
Forging process of BTi62 titanium alloy YANG Hui-li, LI Xiao-wei, YANG Yu-lan, MA En-hui, LI Dong-mei 815
Analysis of microstructures of electron beam welding joints for
 TA15 titanium alloy		 YAO Gang, LI Jin-wei, LU Ye-hang, LI Zhong-cheng 819
Hot deformation behavior of Ti5Mo5V2Cr3Al alloy YOU Zhen-ping, WANG Bo, HUI Song-xiao, YE Wen-jun, YU Yang, LIU Rui 822
Fatigue fracture of TC4 fasteners ZHANG Peng, LAI Yun-jin, WANG Yong-zhe, TIAN Lin, ZHU Yan-li 826
Fine microstructure and its effect on hardness of
electron beam welding joint of TC21 Ti alloy		 ZHANG Bing-gang, WANG Ting, CHEN Guo-qing, FENG Ji-cai, LI Dong 829
Three dimensional stress testing of welded joint of
titanium heavy plate		 ZHANG Jian-xin, WANG De-quan, LIU Xi-lin, LI Xin, GUO Hong-tao 833
Electron beam welding process of CT20 Ti alloy ZHAO Bin, YANG Ying-li, ZHAO Heng-zhang,DU Yu, GUO Di-zi 838
Investment casting mold filling capacity of high temperature titanium alloy IMI834 ZHAO Er-tuan, KONG Fan-tao, XIAO Shu-long, CHEN Yan-fei, CHEN Yu-yong 843
Superplastic deformation of Ti-55 alloy sheet ZHAO Zi-bo, GE Jing-lu, CHEN Zhi-yong, WANG Qing-jiang, LIU Jian-rong 847
Hot deformation behavior of Ti-5553 alloy ZHOU Wei, GE Peng, ZHAO Yong-qing, LI Qian, FENG Liang, YANG Yi 852
FEM simulation of glass lubrication during section extrusion of titanium alloy BAI Chun-guang, XU Dong-sheng, LEI Jia-feng, LIU Yu-yin, XU Zhe, LIU Ming-hui,LÜ, Pei-cheng, DUAN Su-j 857
Isothermal forging technology of titanium alloy casing forging MENG Qing-tong, PANG Ke-chang, ZHOU Jian-hua 862
Circular electrode pressed under low pressure HU Zong-shi, LI Yuan, YANG Meng 865
Control analysis of main group element for
Ti-13Nb-13Zr alloy in VAR process		 NIU Zhong-jie, YANG Guan-jun, ZHAO Yong-qing, CAO Ji-min, YANG Hong-jin 868
Applications, Development and Oth
Advantages and disadvantages of electron beam cold hearth melting CHEN Feng, CHEN Li, GUO Bin, PENG Qiang, GUO Sheng-xiang, MAO Ling-ling 873
Introduction and application of industrial cooling hearth
 melting technology		 QIN Gui-hong, WANG Wan-bo, JI Bo, WU Ying-yan 877
Analysis on corrosion surface of several titanium alloy
in boiled dense nitric acid		 GUO Di-zi, YANG Ying-li, ZHAO Bin, ZHAO Heng-zhang 881
Ultrasonic peening technical of titanium-alloy welded joint with
plasma arc welding		 GUO Xiao-hui, LIU Jun, HE Gang, XU Xi-jun, JIA Xiao-fei 886
40 years of Chinese titanium standard Huang Yong-guang 890
Research and development of hot extrusion technology for
 titanium products		 JIA Ru-lei, JI Bo, LÜ, Wei-jie, WANG Zong-bao 897
Effect of vacuum heat treatment on microstructure and tensile property of cold sprayed porous Ti bulk LI Wen-ya, YU Min, LIAO Han-lin 902
Melting technology of wrought Ti and Ti alloy LI Xiong, PANG Ke-chang, GUO Hua, LI Hong-en 906
Effect of laser cutting in nitrogen atmosphere on microstructure of TC11 titanium alloy and properties of welding joints LIU Chang-kui, LI Ying, HE Yu-huai, TAO Chun-hu 914
Current research situation of micro powder injection molding and
its use in titanium alloy parts preparation		 LUO Jie-wen, CHEN Qiang, CAI Yi-xiang 918
Research on automatic ultrasonic test system of
 probe rotating type for tubes		 MA Xiao-huai, JIANG Li-xin, WANG Hai-liang 923
Relationship between microstructure and inspection for
TC18 titanium alloy bar		 QIAO En-li, FENG Yong-qi, LI Wei-qing, HE Shu-lin 927
Application of COMBI in study of titanium alloys and characterization of titanium combinatorial libraries QIN Dong-yang, LU Ya-feng 930
Control of chemical composition of TC11 alloy
standard sample for spectral analysis		 REN Chun-yan, LI Dong-mei, ZHANG Ai-rong, MAO Qi, ZHAO Fang-li, SU Hai-jun 937
Process of BT16 titanium alloy fastener SHA Ai-xue, LI Xing-wu , LI Hong-en, WANG Qing-rui 942
Cold expansion forming of Ti-75 perforated tube SU Hang-biao, YANG Ying-li, ZHAO Yong-qing, GUO Di-zi, WU Jin-ping, ZHAO Heng-zhang, ZHAO Bin 945
Anodization technique of TA2 titanium alloy plate SUN Shu-ying, WU Zheng-dao, GUO Xue-mei, DENG Chao 950
Microstructure and wear behavior of biomedical Ti-Nb based alloys WANG Ben-li, LI Li, ZHENG Yu-feng 953
Development and application of high-strength titanium alloys WANG Ding-chun 958
Application of phased array ultrasonic testing technology
on inspection of titanium thick welds		 WANG Fu-xi, ZHOU Xiao-feng, E Nan, LI Bin 964
Porous Ti-24Nb-4Zr-8Sn alloy for biomedical applications
fabricated by space-holder method		 WANG Xi-han, LI Shu-jun, JIA Ming-tu, HAO Yu-lin, YANG Rui, GUO Zheng-xiao 967
Design and manufacture of explosion-containment vessel made
of Ti/steel clad plate		 WEN Chao, LIU Xiao-xin, MA Yan-jun 972
Ultrafine titanium powders for coatings
prepared by high energy ball milling		 XIE Huan-wen, CAI Yi-xiang, TAN Li-xin, LIU Xin 977
Producing process of high quality synthetic rutile for
fluidizing chlorination		 XIONG Xue-liang, YANG Zhi, OUYANG Hong-yong, WANG Kang-hai 981
Microstructure and properties of Ti-Cr alloys used for dentistry XU Li-juan, YU Hong-bao, HUANG Yu-dong, XIAO Shu-long, CHEN Yu-yong 986
Process of high velocity compaction in forming Ti powder YAN Zhi-qiao, CAI Yi-xiang 992
Preparation of WC coatings for TC4 YANG Wei-hua, ZHOU Hai-bin, WANG Chun 997
Research progress in titanium alloys for naval ships in China YANG Ying-li, SU Hang-biao, GUO Di-zi, ZHAO Bin, WU Jin-ping, ZHAO Heng-zhang, LUO Yuan-yuan 1002
Micro-nano technology and latest progress of
biomedical titanium alloy		 YU Zhen-tao, MA Xi-qun, YU Sen, ZHANG Ming-hua, HAN Jian-ye, LIU Chun-chao 1008
α contamination layer of TC4 titanium alloy fasteners ZHANG Qing-yun, LU Ye-hang, LI Zhong-cheng, LI Wei-qiang 1013
Research status of equal channel angular pressing
titanium and titanium alloy		 ZHANG Yong-qiang, GUO Hong-zhen, ZHAO Yan, WANG Tao, WANG Yan-wei, YAO Ze-kun 1016
Research progress of titanium alloy for aerospace fasteners ZHAO Qing-yun, XU Feng 1021
Ultrasonic inspection of composition segregation in
small diameters titanium bars		 MAO Jiang-hong, WANG Jian-gan, ZHANG Yi, CAO Ji-min, XIAO Song-tao 1024
Electrochemical corrosion behavior of Ti-24Nb-4Zr-8Sn in
phosphate buffer saline solutions		 BAI Yun, LI Shu-jun, HAO Yu-lin, YANG Rui, GUO Zheng-xiao 1030
Applications of titanium and titanium alloys in automotive field LI Zhong 1034
Effect of surface machining state
on fatigue property of Ti-1023 titanium alloy		 QI Li-chun, HUANG Li-jun, HUANG Xu, LI Zhi-yan 1039
Effects of parameters of cold deformation and annealing on
microstructure and tensile properties of CT20 alloy tube		 DU Yu, GUO Di-zi, LIU Wei, QI Yun-lian, LU Ya-feng 1045
Fractograph and fatigue behavior of
TC18 titanium alloy lugs		 LIU Cui-yun, LI Huan-xi, MA Chao-li 1050
Interface reaction of SiC fibers reinforced Ti-Al
intermetallic-matrix composites		 ZHANG Di, SUN Yan-bo, ZHAO Ye-qing, LI Huan-xi, MA Chao-li 1055
Fabrication of ternary TiAlNb intermetallic alloy
with foil-foil method		 ZHAO Ye-qing, SUN Yan-bo, ZHANG Di, MA Chao-li 1060
Fabrication of multilayered Ti-Al intermetallic sheets
by fail-fail method		 SUN Yan-bo, ZHAO Ye-qing, ZHANG Di, MA Chao-li 1064
Influence of heat treatment on microstructure and
mechanical properties of Ti-1300 alloy		 GE Peng, ZHOU Wei, ZHAO Yong-qing 1068

ISSN 1004-0609
CN 43-1238/TG
CODEN: ZYJXFK

ISSN 1003-6326
CN 43-1239/TG
CODEN: TNMCEW

主管：中国科学技术协会 主办：中国有色金属学会 承办：中南大学
湘ICP备09001153号 版权所有：《中国有色金属学报》编辑部
------------------------------------------------------------------------------------------
地 址：湖南省长沙市岳麓山中南大学内 邮编：410083
电 话：0731-88876765，88877197，88830410   传真：0731-88877197   电子邮箱：f_ysxb@163.com