| MATERIALS SCIENCE AND ENGINEERING |
| Progress and application of Zr-based amorphous alloys |
HUANG Jin-song, LIU Yong, CHEN Shi-qi,LIU Zu-ming, HUANG Bai-yun |
1321 |
| Molecular dynamics simulation of amorphous formation during solidification processes of liquid metal Ag6Cu4 |
HENG Cai-xing , LIU Rang-su , PENG Ping |
1333 |
| Numerical simulation of extrusion of high energy milled Ti/Al powders |
LI Xiao-qiang, LI Yuan-yuan, LONG Yan,HU Lian-xi, WANG Er-de |
1338 |
Application of CALPHAD in soldering
of electronic materials |
LIU Chun-lei, JIN Zhan-peng, LIU Hua-shan |
1343 |
| Simulation of heat transfer behavior of shaped interface in aluminum cast-rolling process |
GAO Zhi, XIAO Gang |
1350 |
Computer simulation of grain growth(Ⅰ)
—Modified transition probability |
LIU Zu-yao, LI Shi-chen, ZHENG Zi-qiao, CHEN Da-qin, LI Jian |
1357 |
Mechanical properties and microstructure of
HA-Ti and HA-BG-Ti composited biomaterials |
RUAN Jian-ming, ZOU Jian-peng |
1361 |
| Deformation and mechanical properties of Zr-based bulk metallic glasses under nanoindenter |
WU Xiao-feng, ZHANG Hai-feng, LI Hong, WANG Ai-ming,YANG Hong-cai, HU Zhuang-qi |
1368 |
Hydrogen storage properties of La2Mg16Ni alloy
modified by ball milling in benzene |
CHI Hong-zhong, CHEN Chang-pin, CHEN Li-xin |
1374 |
Effects of addition of carbon nanotubes in positive electrode on
properties of MH/Ni batteries under high-rate discharge conditions |
LU Ji, TU Jiang-ping, ZHANG Wen-kui, ZHANG Bo, WU Jian-bo |
1378 |
Influence of Cu interlayer thickness on ferromagnetic coupling of
Co/Cu/Co nano-multilayers |
MA Xiao-yan, YANG Bai, BI Xiao-fang,GONG Sheng-kai, XU Hui-bin |
1383 |
Preparation of nanostructured nickel-phosphorous powders
using ultrasonic chemistry reduction in aqueous solution |
YU Shui, YU Hong-ying, WANG Ying, XIAN Chai -jun,MENG Hui-ming,Li Huei-qin, SUN Dong-bai |
1387 |
Thermal stability of composite of nanocrystalline WC powder
and carbon nanotubes |
TAN Hong-bo, WU Xi-jun, LI Ji-gang, LIU Jin-fang |
1392 |
Fabrication of long YBCO films
on Ag base tape |
LIU Min, ZHOU Mei-ling, LIANG Jin-xia, GAO Xin,ZHAI Le-heng, LIU Dan-min |
1397 |
Niobium capacitor and its
dielectric stability |
LI Chun-guang, ZHONG Jing-ming,GAO Yong, DONG Ning-li |
1401 |
Al-Ti-C alloys with different phases prepared through reaction of Ti and
C in Al melt |
WANG Zhen-qing, LIU Xiang-fa, BIAN Xiu-fang |
1407 |
Preferred crystal orientation of Hf films prepared by
ion beam assisted depostion |
JIANG Bing-yao, REN Cong-xin, ZHENG Zhi-hong,LIU Xiang-huai, FAN Hui-ming, YAO Liu-cong,LI Yu-tao
| 1414 |
Influence of high-energy ball milling on phase components
and transformation mechanism of cordierite ceramics |
CHEN Guo-hua, LIU Xin-yu |
1420 |
Al-steel interfacial microstructure of casting produced by
inserting explosively welded Cu-steel plate into aluminium melt |
ZHANG Xin-ming , LI Zhi-feng, CHEN Jian-mei,YANG Xu-yue, ZHOU Zhuo-ping |
1425 |
Microstructures of unidirectional fibre-reinforced C/C
composites fabricated by liquid method |
XIONG Xiang, HUANG Bai-yun, XIAO Peng |
1430 |
Measurement of graphitization degree of carbon-carbon composites by
average X-ray diffraction angle method |
TANG Zhong-hua, ZHOU Gui-zhi, XIONG Jie, ZOU Zhi-qiang |
1435 |
| In-situ (Mg2Si+Si)/Zn matrix composite fabricated by centrifugal casting |
WANG Qu-dong, WEI Yin-hong, CHEN Wen-zhou, ZHU Yan-ping, ZHAI Chun-quan, MA Chun-jiang, DING Wen-jiang |
1441 |
| Corrosion behavior of silicon carbide in molten cryolite |
LI Shi-bin, LV Zhen-lin, GAO Ji-qiang, JIN Zhi-hao |
1447 |
Corrosion resistances of
Ni3Al based alloy IC6 and MCrAlY overlay coatings |
LI Shu-suo, HAN Ya-fang, XIAO Cheng-bo, SONG Jin-xia |
1451 |
Improvement of fatigue properties of welded joints for titanium alloy by
ultrasonic peening method |
WANG Dong-po, HUO Li-xing, ZHANG Yu-feng |
1456 |
Effect of press quenching variables on microstructures and
mechanical properties of 6005A alloy extrusion sections |
SHEN Jian, LI Yan-li, ZHU Ming-feng |
1461 |
Effect of multi-enhanced treatment on microstructure and mechanical
properties of high strength
aluminum alloy |
NIN Ai-lin, ZENG Su-min |
1467 |
Microstructure of 5083 Al alloy processed by
reactive spray deposition |
YANG Shou-jie, DAI Sheng-long, LI Shu-suo, HAN Ya-fang |
1473 |
Effect of high temperature pre-precipitation on
microstructure and mechanical
property of 7055 alloy |
ZHANG Zhuo, CHEN Kang-hua, HUANG Lan-ping,LIU Hong-wei, LI Song |
1477 |
| Solute partition behavior and its influences on solidification process of Al-Si-Mg alloys |
ZHANG Rui-jie , WANG Xiao-ying , JIE Wan-qi |
1483 |
Microstructure evolution and partially remelting processing of
two-phase-region casting AZ91D semisolid slurry ingot |
LE Qi-chi, CUI Jian-zhong, LU Gui-min, OU Peng |
1488 |
Super-high strength 7A60 Al alloy by
low frequency electromagnetic cast（Ⅰ）——as-cast structures of billets with diameter of 0.2m |
DONG Jie, CUI Jian-zhong, LIU Xiao-tao,ZHAO Zhi-hao, BAO Wei-ping |
1494 |
Microstructural refinement mechanism on aluminum alloy
produced by semi-continuous casting in electromagnetic vibration |
ZHANG Qin, CUI Jian-zhong |
1500 |
| Deep drawability of AZ31 magnesium alloy sheets at elevated temperatures |
ZHANG Kai-feng, YIN De-liang, WU De-zhong, JIANG Shao-song |
1505 |
| Microstructure of friction stir welds in AZ31 magnesium alloy |
ZHANG Hua, LIN San-bao, WU Lin, FENG Ji-cai, GUO He-ping |
1510 |
| Effects of Al5TiB on aging process of Mg-8Zn-4Al-0.3Mn alloys |
WANG Ying-xin, WANG Jian-qiang, GUAN Shao-kang |
1514 |
A new technology for contact reactive brazing of aluminum to
stainless steel in composite electro-thermal cooker |
HE Peng, QIAN Yi-yu, FENG Ji-cai, HAN Jie-cai,MAI Han-hui, HUANG Zhen-feng |
1519 |
| MINERAL PROCESSING, METALLURGY AN |
| Kinetics analysis of thermal decomposition reaction of diaspore |
YANG Hua-ming, YANG Wu-guo, HU Yue-hua, QIU Guan-zhou |
1523 |
| Numerical simulation of heat transfer process of ring anode baking furnace |
ZHANG Li-qi, ZHENG Chu-guang, XU Ming-hou |
1528 |
Numerical simulation of three-dimensional temperature field of
gas start-up method for aluminum electrolysis cell |
WU Cheng-bo, YIN En-sheng, ZHANG Li, LIU Yong-gang,ZHANG Bing-huai, TANG Qian |
1534 |
| Preparation of NiFe2O4-Cu based cermet inert anodes in aluminium electrolysis |
TIAN Zhong-liang, LAI Yan-qing, ZHANG Gang, QIN Qing-wei,WANG Jian-feng, LI Jie, LIU Ye-xiang |
1540 |
| Application of stable control theory to anode baking kiln |
GUO Ge, YUAN Zhan-ting, LI Zhan-ming |
1546 |
| Electrocatalytic activity of titanium based RuO2-CeO2-SnO2 coating anodes |
JI Hong, ZHOU De-rui , ZHOU Yu-hong |
1550 |
Preparation and electrochemical characteristics of
Mg-based hydrogen storage
alloys with Zr |
YUAN Hua-tang, FENG Yan,SONG He-nan, QIAO Lin-jun, WANG Yi-jing |
1554 |
Au(Ⅰ) stripping from gold loaded CTAB-TBP organic phase
by transformation and reduction |
YANG Xiang-jun, CHEN Jing, WU Jin-guang, LI Kai-zhong,ZHOU Wei-jin, WEI Qun-yan, JIANG Jian-zhun, LI Qi |
1565 |
| Concentrating precious metals in catalyst with aluminum sub-sulphide |
WU Guo-yuan, DAI Yong-nian |
1570 |
Mechanism of extracting magnesium using 2-ethylhexyl
phosphonic acid mono-2-ethylhexyl ester from sulfate media |
LIU Jiu-miao, TAN Ding-sheng, JIANG Jian-jun, ZHOU Bang-na |
1574 |
