Transactions of Nonferrous Metals Society of China The Chinese Journal of Nonferrous Metals

您目前所在的位置:首页 - 期刊简介 - 详细页面

中国有色金属学报

ZHONGGUO YOUSEJINSHU XUEBAO

第13卷    第6期    总第57期    2003年12月

[PDF全文下载]        

    

文章编号:1004-0609(2003)06-1407-07
制备多物相AlTiC合金的Ti与C熔体反应法
王振卿, 刘相法, 边秀房

(山东大学 材料液态结构及其遗传性教育部重点实验室, 济南 250061)

摘 要: 将Ti与C同时加入Al熔体可制备出Ti与C摩尔比分别大于、 等于、 小于4的3种含不同物相的AlTiC合金: Al-TiAl3-TiC、 Al-TiC、 Al-Al4C3-TiC。对纯铝的细化实验表明: 不含过量Ti的后两种合金的细化效果相近, Al4C3在 Al-TiC合金中的大量出现不会进一步降低合金的细化能力; 含TiAl3的第一种合金的细化效率远高于后两者的; TiC物相在基体中以离散颗粒或聚集团形式在Al基体中分布; Al4C3相极脆, 易与空气中的水蒸汽反应而分解。 分析表明Ti与C在Al熔体中反应生成TiC是通过两条途径同时进行的: 熔体中的固体C颗粒与溶解态的Ti直接反应; 固体C颗粒和Al反应生成的Al4C3与溶解态的Ti发生反应。

 

关键字: AlTiC合金; TiC; 晶粒细化; Al4C3

Al-Ti-C alloys with different phases prepared through reaction of Ti and 
C in Al melt
WANG Zhen-qing, LIU Xiang-fa, BIAN Xiu-fang

Key Lab of Liquid Structure and Heredity of Materials, Ministry of Education, 
Shandong University, Ji′nan 250061, China

Abstract:Three kinds of AlTiC alloys with the mole ratio of Ti and C exceeding, equal to or below the stoichiometric value in TiC, i.e. Al-TiAl3-TiC, Al-TiC, and Al-Al4C3-TiC alloys, can be readily produced by a new method involving the simultaneous addition of Ti and C into Al melt. The latter two kinds of alloys have similar refinement efficiencies on pure Al despite of the presence of large amount of Al4C3 phase in Al-Al4C3-TiC, but their efficiencies are much lower than that of the first one due to the absence of excess Ti beyond the combined in TiC in the matrix, suggesting some significant role of excess Ti in the refinement. TiC phase in the alloys exists in the form of discrete particle or small clusters  consisting of several discrete particles, which are homogeneously distributed in the matrix. Large agglomerates of TiC particles along grain boundaries were also observed. Al4C3 phase in Al8Ti3.5C is brittle and easy to react with moisture in the air. Analysis shows that formation of TiC is accomplished through the simultaneous reaction of Ti dissolved in the Al melt with either solid carbon particle or Al4C3 phase.

 

Key words: AlTiC alloy; TiC; grain refinement; Al4C3

ISSN 1004-0609
CN 43-1238/TG
CODEN: ZYJXFK

ISSN 1003-6326
CN 43-1239/TG
CODEN: TNMCEW

主管:中国科学技术协会 主办:中国有色金属学会 承办:中南大学
湘ICP备09001153号 版权所有:《中国有色金属学报》编辑部
------------------------------------------------------------------------------------------
地 址:湖南省长沙市岳麓山中南大学内 邮编:410083
电 话:0731-88876765,88877197,88830410   传真:0731-88877197   电子邮箱:f_ysxb@163.com