MATERIALS SCIENCE AND ENGINEERING |
Technology of hydrogen treatment for titanium alloy and its application prospect |
HOU Hong-liang, LI Zhi-qiang,WANG Ya-jun, GUAN Qiao |
533 |
Effect of melt-superheating treatment on nitrogen-absorption behavior in cast nickel-base superalloy |
ZHOU Li, SUN Xiao-feng, YIN Feng-shi, HOU Gui-chen,ZHENG Qi, GUAN Heng-rong, HU Zhuang-qi |
550 |
Pre-heat treatment of PREP FGH95 superalloy powders |
CHEN Huan-ming, HU Ben-fu, LI Hui-ying, SONG Duo |
554 |
Elastic deformation energy and cavitation erosion of Ti3Al-based alloy |
LONG Ni-dong, ZHU Jin-hua |
560 |
Structure stability of Ni-Cr-Co base superalloy aged at 704℃ and 760℃ |
ZHAO Shuang-qun, DONG Jian-xin, XIE Xi-shan |
565 |
Friction and wear behavior of Ti-Mo diffusion layer on Ti6Al4V alloy substrate in sliding against GCr15 |
QIN Lin, TANG Bin, ZHAO Jing-xiang, XU Zhong |
570 |
Mechanism of air flow attrition of boron carbide powder |
WANG Ling-sen, FANG Yin-chu, YIN Ban-yao |
574 |
Fabrication of Fe-Sn intermetallic compound powders by solid-liquid reaction milling |
CHEN Ding, CHEN Zhen-hua, CHEN Gang, HUANG Pei-yun |
579 |
Preparation of Al-Mg-Sc master alloys |
JIANG Feng, BAI Lan, YIN Zhi-min |
584 |
Physical simulation of roll-casting microstructure of Al alloy |
LIU Yong, ZHOU Ke-chao, LIN Ying-hong, WANG Hai-bing |
589 |
Grain refinement of wrought AZ31 magnesium alloy |
WANG Ling-yun, HUANG Guang-sheng, FAN Yong-ge, HUANG Guang-jie |
594 |
Friction and friction coefficient for aluminium alloy extrusion |
DENG Xiao-min, SUN Zhong-jian, LI Sheng-zhi, FANG Mu-yun, CAO Jie |
599 |
Prediction of solidification path of Al-1.5Cu-3Zn fromexperimental phase diagram and numerical model |
CHEN Fu-yi, JIE Wan-qi |
606 |
Effect of trace Sc addition on microstructure and mechanical properties of thermomechanically treated 2195 Al-Li alloy |
YIN Deng-feng , ZHENG Zi-qiao, YU Zhi-ming |
611 |
Effects of RE on microstructures of Mg-8Zn-4Al-0.3Mn magnesium alloys |
WANG Ying-xin, GUAN Shao-kang, WANG Jian-qiang |
616 |
Grain refining effect of Al-Ti-C master alloy on Mg-Al alloys |
LIU Yan-hui, LIU Xiang-fa, LI Ting-bin, BIAN Xiu-fang, ZHANG Jun-yan |
622 |
Reheating of semi-solid ZL101 alloy |
YANG Hong-liang, ZHANG Zhi-liang, I. Ohnaka, H. Yasuda, A. Sugiyama, T. Ohmichi |
626 |
Corrosion of aluminum in wet/dry environment containing SO2 |
HAN Wei, WANG Zhen-yao, YU Guo-cai, WANG Jun |
631 |
Quench sensitivity of 6005A aluminum alloy |
XIAO Cong-wen, WANG Ming-pu, WANG Zheng-an, LI Zhou, GUO Ming-xing |
635 |
Effect of heat-treatment on microstructures and mechanical properties of in-situ TiCp/Fe composites |
YAO Xiu-rong, LIU Zhao-jing, LI Feng-zhen, HAN Jie-cai, REN Shan-zhi |
640 |
Internal friction peak and its damping mechanism for 6061Al alloy/SiCp/Gr MMC |
GU Min, WANG Xi-ke, SHEN Ning-fu, GU Jin-hai,ZHANG Ying-yuan, LE Yong-kang |
645 |
Microstructure and properties of C/C composites prepared by thermal gradient CVI process |
TANG Zhong-hua, ZHANG Hai-po, ZOU Zhi-qiang |
651 |
Microstructure of filaments extracted from Cu-Fe-Cr in situ composite |
SUN Shi-qing, GUO Zhi-meng , YIN Sheng |
658 |
In situ processed Al2O3/Al composites with several oxides reaction systems |
WANG Hui-hu, XU Bo-fan, WU Xin-jie, ZHANG Xi-ju |
662 |
Microstructure and damping property of fiber/resin/aluminum alloy laminated composite |
ZHENG Li-Juan, ZHAO Yu-tao, JIN Ming-jiang, CHENG Xiao-nong, LIU Qiang |
667 |
Effects of sintering condition on property of porous HA bioceramic implant |
WANG Xin-yu, HAN Ying-chao, DAI Hong-lian, LI Shi-pu, HE Jian-hua |
671 |
Effect of Y2O3 on in situ synthesis of HA |
GAO Jia-cheng, WANG Yong |
675 |
New type TiV-based hydrogen storage electrode alloy |
ZHU Yun-feng, PAN Hong-ge, LIU Yong-feng, LI Rui, JIN Qin-wei, WANG Qi-dong |
680 |
Fabrication of AgC5 contact material by nano-phase coating |
LEI Jing-xuan, YU Hai-feng, MA Xue-ming,ZHU Li-hui, LU Yao, XIANG Jing, WENG Wei |
685 |
Preparation and properties of LiNi1-yAlyO2 as cathode material in lithium ion battery |
LI Hui, ZHAI Yu-chun, TIAN Yan-wen |
690 |
Design of properties measuring apparatus and application for hydrogen storage material |
ZHANG Wen-cong, FANG Wen-bin, LUO Nian-ning, YU Zhen-xing, WANG Er-de |
695 |
Effect of repetitive melting on glass forming ability of Zr-based alloys |
SONG Jian-li, YAN Zhi-jie |
699 |
Measurement of modulus and calculation of effective pair potential for Zr-based bulk amorphous alloy in structural relaxation |
SUN Shao-rui, LIN Guang-ming, SHI Can-hong |
704 |
Effects of TiO2 on microstructure of RuO2+SnO2+TiO2/Ti anode nanometer coatings |
WANG Xin, TANG Dian, ZHOU Jing-en |
708 |
Electroless plating of Co-P alloy on nano-Si3N4 powders |
ZHANG Hui-ze, LIU Tao, WANG You-wen, LING Guo-ping, LI Jian |
713 |
Kinetics of aging process of Cu-3.2Ni-0.75Si-0.30Zn alloy |
ZHANG Ling-feng,LIU Ping,KANG Bu-xi,ZHAO Dong-mei,TIAN Bao-hong,DONG Qi-ming |
717 |
Experimental procedure and data processing of pipe material for high temperature low cycle fatigue |
LI Yuan-rui, CHEN Lin |
722 |
Thermal cycling on-line measuring method for evaluating dimensional stability of metal materials unloaded |
WANG Xiu-fang, WU Gao-hui, LI Xiao-ling, SUN Dong-li |
727 |
Influence of combined addition of Ce and Ca on ignition proof of AZ91D magnesium alloy |
XIN Ming-de, JI Ze-sheng, LIANG Wei-zhong,HOU Le-gan |
731 |
MINING, METALLURGY AND CHEMISTRY |
Endochronic rheological constitutive model of soft rock |
CHEN Yuan-jiang, PAN Chang-liang, CAO Ping, WANG Wen-xing |
735 |
PP method and its application on test data analysis |
LI Chao-kui, ZHU Qing, ZHAO Jie |
743 |
Pattern recognition and its intelligent realization of probable rock mass failure based on RES approach |
GUO Li, WU Ai-xiang, ZHOU Ke-ping, YAO Zhen-gong |
749 |
Numerical simulation on acoustic emission during pillar rock burst |
WANG Shan-yong, TANG Chun-an, XU Tao, TAN Zhi-hong |
754 |
A new mining technology for slightly inclined multi-layer ore bodies |
LUO Zhou-quan, ZHOU Ke-ping, GU De-sheng, SHI Xiu-zhi, CHEN Jian-hong, GAO Wen-xian, DAI Yun-ou, HU Shi-hua< |
760 |
Effect of AlF3 dopant and baking temperature on overpotential of carbon anode in aluminium electrolysis |
LAI Yan-qing, QIN Qing-wei, LI Qing-yu, LI Jie, LIU Ye-xiang |
764 |
Solid state reaction synthesis of Ni(1-x)ZnxFe2O4 spinel used as matrix of inert anodes in aluminium electroly |
QIN Qing-wei, LAI Yan-qing, ZHANG Gang,TIAN Zhong-liang,ZHOU Xin-lin, LI Jie,LIU Ye-xiang, HE Yue-hui
| 769 |
Preparation of active zinc powder by electrowinning in system of Zn(Ⅱ)-NH3·H2O-(NH4)2SO4 |
ZHAO Ting-kai, TANG Mo-tang, LIANG Jin |
774 |
Mathematical model of zinc vapour dynamic response in lead column based on fluctuant charge of condenser |
E Jia-qiang, MEI Chi, ZHANG Quan, SHI Zhang-ming |
778 |
Preparation of monodisperse spherical superfine cerium dioxide using mechanochemical method |
GU Zi-ying, HU Ping-gui, PENG De-yuan, JIAO Xiao-yan, ZHOU Xue-zhen, LI Yong-xiu |
783 |
Preparation of photocatalytic activity nanosized TiO2 by hydrolysis-sol method |
YAN Jian-hui, HUANG Ke-long, SI Shi-hui, LIU Su-qin |
788 |
Influence of Fe deposition on photocatalytic activity of TiO2/SiO2 composite photocatalyst |
HUANG Cong, WANG Liang-yan, XU Yue-hua, LI Xin-jun,ZHENG Shao-jian, LI Fang-bai |
793 |