Structural Materials |
Microstructure and mechanical properties of
ZK60 magnesium alloy processed by T-shape channel pressing |
KONG Jing, HOU Wen-ting, PENG Yong-hui, KANG Zhi-xin, LI Yuan-yuan |
1199 |
Dynamic recrystallization kinetics of
ZK60 magnesium alloy during hot deformation |
HE Yun-bin, PAN Qing-lin, QIN Yin-jiang, LIU Xiao-yan, LI Wen-bin, Yu-lung CHIU, J. J. J. CHEN |
1205 |
Hot compression deformation behaviors of
as-extruded AZ81 magnesium alloy at elevated temperature |
CAO Feng-hong, LONG Si-yuan, G. S. COLE |
1214 |
Hot deformation behavior and processing map of
Al-Zn-Mg-Sc-Zr alloy |
HE Zhen-bo, LI Hui-zhong, LIANG Xiao-peng, YIN Zhi-min |
1220 |
Kiss-point of solidification layer position control and process optimization for magnesium alloys twin-roll casting |
WENG Wen-ping, DENG Kang, REN Zhong-ming, CHEN Qi, CHI Zhi-dong, ZHAO Qi-te |
1229 |
Effect of ageing condition on microstructure and properties of Al-Cu-Mg-Ag-Zr alloy |
ZHANG Jian-bo, ZHANG Yong-an, ZHU Bao-hong, WANG Feng, LI Zhi-hui, LI Xi-wu, XIONG Bai-qing |
1235 |
Thermal stability of Al-Cu-Mg-Ag heat-resistant alloy |
LIU Xiao-yan, PAN Qing-lin, LU Zhi-lun, CAO Su-fang, HE Yun-bin, LI Wen-bin |
1244 |
Analysis of secondary phases and measurement of
volta potential of 7A52 aluminum alloy |
ZHANG Ping, LI Qi, ZHAO Jun-jun, ZENG Qing-qiang |
1252 |
Friction and wear properties of particle reinforced graded aluminum matrix composites |
CHEN Cong-cong, CHEN Gang, YAN Hong-ge, SU Bin |
1258 |
Effects of Mo, V and Ag additions on microstructure and
mechanical properties of powder metallurgy Ti-5Al alloy |
XIAO Dai-hong, YANG Bao-gang, SHEN Ting-ting, YUAN Tie-chui, HE Yue-hui, WANG Shou-ren |
1265 |
Microstructure evolution and mechanical properties of
Ti-15-3 alloy during cold-rolling |
GUO Qiang, WANG Qing, HAN Xiu-li, SUN Dong-li, SUN Tao, WU Gao-hui |
1272 |
Influence of Si content on (1−x)Ti3SiC2+xSiC composites prepared by spark plasma sintering |
NGAI Tung-wai, TAN Wen-chang, ZHENG Jun-jun, LUO Hui-guo, LI Yuan-yuan |
1279 |
Bulk Ti66Nb18Cu6.4Ni6.1Al3.5 fine grain composites reinforced by crystallized phases fabricated by spark plasma sintering |
CHEN Wei-ping, WU Xue-mei, YANG Chao, LÜ, Ying, QU Sheng-guan, CHEN Min-dan |
1285 |
Effect of high longitudinal magnetic field on interface stability and morphology of directionally solidified Al-0.85%Cu alloy |
LI Mao, REN Wei-li, REN Zhong-ming, LI Xi, ZHONG Yun-bo, DENG Kang |
1292 |
Functional Materials |
Duplex surface modification combined with micro-arc oxidation and polymer plating on AZ31 magnesium alloy and their functional properties |
LAI Xiao-ming, KANG Zhi-xin, LI Yuan-yuan |
1299 |
Electrochemical properties of AZ31 and NZ30K alloys as
anode materials for magnesium battery |
ZHOU Li-ping, ZENG Xiao-qin, CHANG Jian-wei, LIU Zhi, ZHU Ya-qi, YAO Song, DING Wen-jiang |
1308 |
Influences of heat treatment on electrochemical performances and corrosion behaviors of Mg-Al-Pb anodes |
WANG Nai-guang, WANG Ri-chu, PENG Chao-qun, FENG Yan, ZHANG Xiang-yu |
1314 |
Properties of aluminum foam prepared by gas injection method |
FAN Xue-liu, CHEN Xiang, LIU Xing-nan, LI Yan-xiang |
1320 |
Influence of high-energy ball milling on
structure and performance of Cu-10Cr-0.5Al2O3 |
ZHANG Yin, LI Xiao-qiang, YE Yong-quan, LI Yuan-yuan |
1328 |
Fabrication of crystallized Ti70Nb7.8Cu8.4Ni7.2Al6.6 composites by spark plasma sintering or crystallization of amorphous phase |
CHEN You, LIANG Jia-hong, YANG Chao, LI Xiao-qiang, XIAO Zhi-yu, LI Yuan-yuan |
1335 |
Influence of initial state on microstructure of
surface nanocrystallized Ni3Al |
REN Jiang-wei, SHAN Ai-dang |
1342 |
Enhanced sintering and molten salt corrosion behavior of
nickel ferrite based cermets |
ZHOU Ke-chao, TAO Yu-qiang, LIU Bao-gang, LI Zhi-you |
1348 |
Properties and sintering mechanism of
RSiC-WC composite ceramics |
LI Qing, XIAO Han-ning, GAO Peng-zhao, HU Ji-lin, GUO Wen-ming, TANG Jie-xiong |
1359 |
Surface morphology and growth mechanism of
magnetron sputtered CrN films on silicon substrate |
TAN Shu-yong, ZHANG Xu-hai, WU Xiang-jun, JIANG Jian-qing |
1367 |
Preparation and hydrogen storage properties of La0.7Mg0.3Ni2.8Co0.5−xFex series alloys |
TANG Cheng-ying, PAN Wen-chao, QIN Yue-di, ZHOU Huai-ying |
1373 |
Defect chemistry and formation mechanism of pores in
undoped TiO2 ceramics |
YAN Ji-kang, GAN Guo-you, YUAN Jun, DU Jing-hong, YI Jian-hong |
1380 |
Co-sintering densification of heterogeneous materials based on viscoelastic theory |
LIU Pan, HE Hao, LI Yi-min |
1389 |
Preparation of Fe-1%C nanocrystalline by
mechanical milling and its thermal stability |
ZHANG Ke, LIU Feng, GONG Ming-ming, YANG Gen-cang |
1396 |
Ductility and fracture behavior of
Cu/Nb nanostructured multilayers |
ZHANG Xin, ZHANG Jin-yu, NIU Jia-jia, LEI Shi-ying, LIUGang, SUN Jun |
1404 |
Predominace area phase diagram analysis about
synthetic reaction mechanism of TiB2 |
MA Ai-qiong, JIANG Ming-xue |
1409 |
Effects of deposition parameters on diamond film on
Mo-Re alloy substrate |
WANG Jian, YU Zhi-ming, WU Xiao-bin, LIU Qian |
1415 |
Structures and properties of Cu-Mo thin films deposited by
magnetron sputtering |
GUO Zhong-zheng, SUN Yong, ZHOU Cheng, SHEN Li, YING Guo-xiang |
1422 |
Preparation of carbon nanotube embedded in
copper composites particles |
WANG Wei, CHEN Xiao-hua, XIONG Yi-na, YI Bin, CHEN Chuan-sheng, LIU Yun-quan, YAN Hai-mei |
1429 |
Ablation property of tungsten nozzle produced by
plasma spray forming |
XU Xuan, WANG Yue-ming, XIONG Xiang, XIE Lu, MIN Xiao-bing |
1435 |
Atomic force microscope nanoindentation behavior of
shear bands of bulk metallic glasses |
XU Fu, LONG Zhi-lin, PENG Jian, ZHANG Ping |
1444 |
Preparation of transparent glass-ceramics with high crystallinity |
LI Jing, MEI Yu-zhao, LUO Zhi-wei, LU An-xian |
1450 |
Effects of Na2O content on microstructure and properties of NaO-BaO-SrO-Nb2O5-B2O3-SiO2 system glass-ceramics |
ZHANG Wen-jun, CHEN Guo-hua, ZHOU Chang-rong, JIANG Min-hong, WANG Hua, LIU Xin-yu |
1457 |
Strengthening mechanisms of reactive element Hf on key interface in thermal barrier coating systems based on first-principles |
JIANG Yong |
1463 |
Mine |
Bioleaching of low grade copper sulfide ore |
LAI Shao-shi, QIN Wen-qing, YANG Cong-ren, WANG Jun, ZHANG Yan-sheng, ZHANG Bo, CHANG Zi-yong, KUANG Hao-hua |
1473 |
Preparation and properties of praseodymium and
nitrogen co-doped nano-titanium dioxide photocatalyst |
WU Jing, GAO Pan, ZHU Zhong-qi, LIU Qing-ju |
1480 |
Numerical modeling of potential profiles in electrical double layer of Acidithiobacillus ferrooxidans cell surface |
WANG Zhao-hui, XIE Xue-hui, LIU Jian-she |
1485 |
Influence of additives with different saponification values on
lubricative properties of aluminum rolling oils |
SUN Jian-lin, HUANG Ying, XIONG Xiao-jing, YAO Wen-jing, WU Di |
1491 |