| MATERIALS SCIENCE AND ENGINEERING |
| Microstructure and Property of Multistage Atomized Cu-Cr Alloy |
Liu Ping, Kang Buxi, Cao Xingguo, Huang Jinlian, Gu Haicheng |
677 |
| Solidified characterization of rare earth-rich phase in slowly and rapidly cooled Ti-55 alloy |
Li Geping, Li Dong, Liu Yuyin, Wang Qingjiang, Guan Shaoxuan |
683 |
| Process and mechanism of formed pattern graining by electrolytic etching on surface of aluminum alloy |
An Maozhong, Zhao Liancheng, Tu Zhenmi |
688 |
| Strain-ageing process for Al-Li alloy CP276 |
Jiang Na , Xiang Shuguang , Zheng Ziqiao |
694 |
| Electronic structures and physical properties of Zr metal |
Peng Kun and Xie Youqing |
700 |
| Influence of trace Zr on microstructure and mechanical properties of Cu-13Zn alloys |
Yin Zhimin, Luo Fenghua, Wang Mingpu, Xu Guofu, Zuo Tieyong |
705 |
| Effect of trace Sc and Zr on recrystallization behavior of 2618 alloy |
Yu Kun, Li Songrui, Li Wenxian, Xiao Yude |
709 |
| Refining effect of boron on hypoeutectic Al-Si alloys |
Wang Li, Bian Xiufang, Sun Yimin |
714 |
| Effect of high-intensity ultrasonic on structures and properties of Al-Si alloys |
Li Yinglong, Li Baomian, Liu Yongtao, Gao Cairu, Dai Entai |
719 |
| Design of Cu-Ni-Si copper alloy for lead frame |
Cao Yuwen, Ma Jusheng, Tang Xiangyun, Wang Biwen, Wang Shimin , Li Hong |
723 |
| Interfacial strength and structure of steel-mushy aluminum pressing bonding plate |
Zhang Peng, Du Yunhui, Ren Xueping, Kang Yonglin, Liu Hanwu, Cui Jianzhong, Ba Limin |
728 |
| Study and application of fractals in steel-aluminum solid to liquid bonding |
Zhang Peng, Du Yunhui, Ren Xueping, Kang Yonglin, Liu Hanwu, Cui Jianzhong, Ba Limin |
732 |
| Morphologies of intermetallic compounds in AlTiB master alloys |
Zhang Zuogui, Liu Xiangfa, Bian Xiufang, Ma Jiaji |
736 |
| Recrystallization process and high temperature property of TiC/2618 composites prepared by XD method |
Long Chunguang, Zhang Houan, Tang Guoning, Peng Chengzhang |
736 |
| Influence of residual holes on tensile strength of mullite short-fibre/Z L109 composites |
Zhao Ping, Gao Shengji, Shen Baoluo, Tu Mingjing |
740 |
| Micro-Zone Mechanical Properties of SiCp/LD2 Composites |
Qin Shuyi, Liu Cheng, Chen Jiayi, Wang Wenlong, Zhang Guoding |
748 |
| Characterization of TiB2 particles in solidification structures of in-situ processed aluminum matrix composites |
Yang Ping |
752 |
| Effects of heat treatment on dimensional stability of SiCp /2024Al composite |
Zhang Fan, Li Xiaocui, Sun Pengfei |
759 |
| Joining of Si3N4 to Si3N4 using rapidly-solidified Cu-(5～25)Ni-(16～28)Ti-B brazing filler foils |
Xiong Huaping |
764 |
| Self-propagating high-temperature synthesis of AlN ceramic |
Zheng Yongting, Wang Huabin, Han Jiecai, Du Shanyi, He Xiaodong |
769 |
| Cold drawing and annealing textures of tantalum wires |
Zhang Xinming, Zhang Shaorui, Zhou Zhuoping, Shu Yongchun |
774 |
| Effect of antimony on microstructure and mechanical properties of Mg-9Al based alloy |
Yuan Guangyin, Sun Yangshan, Wang Zhen |
779 |
| Dynamics of reaction between SiO2 and Mg-Li melt |
Yu Huashun, Min Guanghui, Liu Yuxian, Chen Xichen |
785 |
| Surface metallurgical technique of Fe-W-Mo-Co age hardened alloy (Ⅰ) |
Li Zhonghou, Liu Xiaoping, Gao Yuan, Su Yongan, Xu Zhong |
790 |
| Effects of sputtered TiAlCr coatings on hot corrosion resistance of TiAl intermetallics in molten sulphate |
Guan Chunhong, Tang Zhaolin, Wang Fuhui, Wu Weitao |
794 |
| MINERAL PROCESSING, CHEMISTRY AND |
| Thermodynamic analysis on new reaction system of liquid phase oxidation of chromite in molten salt |
Zheng Shili, Zhang Yi |
800 |
| Thermodynamical analysis of smelting process of nickel sulfides concentrate |
Zhang Chuanfu, Liu Haixia, Zhong Dalong, Zeng Dewen |
805 |
| Physical properties and thermal stability of high purity tungsten sulfide micro power |
Xing Pengfei, Liu Zhou, You Jilong, Hai Li, Zhai Yuchun |
811 |
| TiO2 nanometer thin film prepared by sol-gel processing and its surface structure |
Yu Jiaguo, Zhao Xiujian |
815 |
| Oxidation of ammoniacal cuprous complex ion in copper-ammonia-water system |
Sun Chi, Yu Zhongxing, Zhou Bangna, Chen Shiguan |
821 |
| Kinetic study of black patina on electrogalvanized steel sheets |
Li Ning, Yuan Fang, Wang Chunsheng, Zhou Derui |
827 |
| Infrared spectrum investigation of Y-type zeolites |
Xiao Hemiao, Gao Xiaohui, Ding Dunhuang, Chen Shifu |
833 |
| Mechanism on synergistic extraction of Ca(Ⅱ) with di(2-ethylhexyl) phosphate and tributyl phosphate as extractants |
Huang qiulian, Wang Kaiyi, Gu Yingying, Qian Dong, Chen Xiaoyi, Lai Deyong |
837 |
| MINING ENGINEERING AND MECHANO |
| Fracture mechanics analysis of rock burst mechanism and prediction |
Wan Guiyao, Sun Zongqi, Qing Dugan |
841 |
| Computer simulation and analysis of stope stability for deep mining in Xiangxi gold mine |
Wu Aixiang, Hu Hua and Yu Jian |
846 |
| Study and application of NiTi alloy intelligent washer |
Sun Baochen, Du Yanliang, Ma Liming, Zhao Weigang, Zhao Tianchen |
852 |
| Power difference between two rollers of high-pressure rolling mill |
Gao Hang, Fang Cunguang, Xu Xiaohe |
856 |
| Treatment of relaxation factor and convergence criterion in simulating flat roll cold rolling process |
Cao Furong, Liu Xianghua, Wen Jinglin, Cui Jianzhong, Lei Fang |
861 |
| Study on method of computer drawing φ—pH diagram |
Feng Qiming, Ma Yunzhu, Wang Yuhua, Lu Yiping |
864 |
| Endpoint prediction of basic oxygen furnace steelmaking based on RBF neural network |
Chai Tianyou, Xie Shuming, Du Bin, Ren Dexiang |
868 |
| Data acquisition and processing of thickness deviation diagnosis expert system for hot strip mill |
Wang Tong, Liu Xianghua, Wang Guodong, Zou Tianlai, Li Hongbin, Wu Yuxin, Zhang Gong |
873 |
| Design of automatic condition monitoring system for circulating turbo-compressors |
Yu Dejie, Zhang Bangji, Li Zhengzhong |
878 |
| Analysis of dynamics for mechanical-electrical system of skip winding being accelerated |
Yan Shirong, Wen Bangchun |
884 |
| Some techniques of creating enterprise homepage |
Tan Xiang |
890 |
