Structural Materials |
Deformation and damage behavior of coarse-grained pure zinc under unidirectional tension and compression |
LI Hui, LI Xiao-wu,, DUAN Qi-qiang, ZHANG Zhe-feng |
1171 |
Effects of Mg-9Sr master alloys with different states on as-cast microstructure of AZ31 magnesium alloy |
CHENG Ren-ju, PAN Fu-sheng,, YANG Ming-bo, TANG Ai-tao |
1178 |
Phase composition and interface of rapidly solidified/powder metallurgy AZ91/SiCp Mg-based composite material |
SHENG Shao-ding, CHEN Ding, CHEN Zhen-hua, CHEN Gang, YAN Hong-ge |
1185 |
Effect of mass ratio of Zn to Al on as-cast microstructure and solidification behaviour of Mg-Zn-Al ternary magnesium alloys |
YANG Ming-bo,, PAN Fu-sheng, LI Zhong-sheng, SHEN Jia |
1191 |
Friction stir welding process of AZ31B and AZ61A magnesium alloy |
WANG Xi-jing, ZHANG Yong-hong, ZHANG Zhong-ke |
1199 |
Effect of zinc content on high temperature creep property of AZ31 magnesium alloy |
ZHANG Shi-chang, ZHU Ming, ZHAO Gang, CHEN Chang-jun |
1205 |
Molybdate conversion coatings on AZ31 magnesium alloy |
YANG Li-hui, LI Jun-qing, YU Xiang, ZHANG Mi-lin |
1211 |
Mechanism of V and Cr on mechanical properties of Ti40 burn resistant titanium alloy |
XIN She-wei,, ZHAO Yong-qing, ZENG Wei-dong |
1216 |
Effect of friction conditions on friction properties of braking materials used for trains |
FU Rong, SONG Bao-yun, GAO Fei, YUN Xin-bing |
1223 |
Wear properties of in-situ Sip/ZA27 composites |
CHEN Ti-jun, YUAN Cheng-ren, HAO Yuan, LI Jian |
1231 |
Effect of current density on surface temperature and tribology behavior of chromium bronze/brass couple |
SHANGGUAN Bao,, ZHANG Yong-zhen, XING Jian-dong, SUN Le-min,QIU Ming, NIU Yong-ping, HOU Ming |
1237 |
Dynamic recrystallization behavior of Cu-Ni-Si-P alloy |
ZHANG Yi, LIU Ping,, TIAN Bao-hong, CHEN Xiao-hong,,JIA Shu-guo, REN Feng-zhang, LONG Yong-qiang |
1241 |
Functional Materials |
Compact processing of containing CuAlNi alloy pipes with continuous columnar crystals |
LIU Xue-feng, LI Wei-he, XIE Jian-xin |
1248 |
Relationship between shape memory effect at low temperature and microstructure of Cu-Al-Mn alloy |
LIU Chuan-xin, ZHENG Yu-hong,, LI Chong-jian,, LONG Yi, WAN Fa-rong, |
1254 |
Microstructure and properties of cathode electrodeposited Ni-SiC nano composite coatings on MB8 magnesium alloy |
LI Xue-song,, WU Hua, YANG You, JIANG Zhong-hao |
1261 |
Formation and control of bubble-free layer during preparation of Al foam by foaming in melt |
LI Bing, CAO Zhuo-kun, WANG Yong, YAO Guang-chun, HUA Zhong-sheng |
1268 |
Phase transformation of Y in fabricating ultra-fine (W, Ni, Fe, Y) composite powders |
FAN Jing-lian, PENG Shi-gao, LIU Tao, DING Fei, TIAN Jia-min |
1274 |
Microstructure and properties of nano-TiN modified Ti(C, N)-based cermets |
ZHANG Xiao-bo, LIU Ning, CHEN Yan, YU Chao, LI Yong |
1280 |
Cutting performance and wear mechanism of Ti(C, N)-based cermets tools in high speed cutting |
LI Peng-nan,, TANG Si-wen, ZHANG Hou-an, ZHANG Yong-zhong |
1286 |
Effect of excess PbO on preparation textured 0.675PMN-0.325PT ceramics by TGG method |
WEN Jia, ZHOU Ke-chao, LI Zhi-you, ZHANG Xiao-yong |
1292 |
Effects of chalcogenide glass microstructure defects on its second order nonlinearity |
GONG Yue-qiu,, LIU Si-wei,, LI Xu-jun, ZHAO Xiu-jian |
1299 |
Computational Materials Science |
Simulation of second phase particles with different sizes on grain growth process |
MA Xiao-fei, GUAN Xiao-jun, LIU Yun-teng, SHEN Xiao-min, WANG Li-jun, SONG Shu-tong, ZENG Qing-kai |
1305 |
Numerical simulation of 3D transient temperature field in aluminum alloy solidification process |
SUI Da-shan, CUI Zhen-shan |
1311 |
Analysis of intrinsic superconductive state and calculation method of superconductive critical temperature |
ZOU Zhuang-hui, ZHOU Zhi-min, WANG Ming-guang, MA Chang-xiang, QI Yang |
1317 |
Simulation analysis of effect of second metal-oxide phase on molten pool in Ag-based electrical contact |
XU Jian, XIONG Wei-hao, FU Jiang-hua, LI Zhen-biao |
1323 |
Mine Engine |
Preparation of superfine aluminum hydroxide by ion-exchange membrane electrolysis |
DONG Jue, CHEN Qi-yuan, YIN Zhou-lan |
1330 |
Metal niobium by solid oxygen-ion membrane |
HE Li, LU Xiong-gang, CHEN Chao-yi, LI Qian, LI Chong-he, ZHONG Qing-dong |
1336 |
Anodization behavior on Pb¬-Ag-Ca-Sr alloy during zinc electrowinning |
ZHONG Shui-ping, LAI Yan-qing, JIANG Liang-xing, TIAN Zhong-liang, LI Jie, LIU Ye-xiang |
1342 |
Ultrafine copper powder prepared by slurry electrolysis under ultrasonic field |
LIU Wei-ping, QIU Ding-fan, YU Yue-guang |
1347 |
Photocatalytic activity of perovskite La1−xSrxMnO3 nanocrystal |
DONG Shu-hua, TIAN Gui-shan, FENG Liu |
1353 |
Activation process and mechanism of ZrVFe getter |
XIONG Yu-hua, GU Wei, WEI Xiu-ying, YUAN Peng, QIN Guang-rong |
1358 |
Alumina rotary kiln flame image retrieval based on flame shapes |
ZHANG Hong-liang, CHEN Xiang-tao, LI Jie, LUO Zong-shan, LIU Dai-fei |
1364 |