Structural Materials |
Effect of warm deformation on natural ageing andmechanical property of aluminum alloy6061 sheets for automotive body |
LI Xiang, TANG Jian-guo, ZHANG Xin-ming, LING Li-yue, LIU Wen-hui, LIAO Zhi-yu, YANG Tao, DENG Yun-lai |
1 |
Heat treatment strengthening and microstructure characteristics of novel Al-Cu-Li-X alloy |
LI Shu-fei, YIN Deng-feng, YU Xin-xiang, PAN Kang-guan, YUAN Xin-xiong, FANG Hong-jie |
7 |
Effects of Cu content on microstructures and mechanical properties of Al-50%Sip composite |
WU Xiang, WANG Ri-chu, PENG Chao-qun, CAI Zhi-yong |
16 |
Effect of Zr on microstructures and mechanical properties of squeeze cast Al-5.0Cu-0.4Mn alloy |
MENG Fan-sheng, ZHANG Wei-wen, ZHANG Da-tong, YANG Chao, XIAO Zhi-yu |
23 |
Microstructure and mechanical properties of as-extruded ultra-light Mg-Li-Al sheet |
LI Rui-hong, JIANG Bin, CHEN Zhi-jun, PAN Fu-sheng |
31 |
Effects of powder characteristics on microstructure and deformation activation energy of nickel based superalloy |
HE Guo-ai, DING Han-hui, LIU Chen-ze, LIU Feng, LAN Huang, JIANG Liang |
37 |
Formation and microstructure evolution of precipitation on prior particle boundaries in P/M nickel-base superalloys |
QIN Zi-jun, LIU Chen-ze, WANG Zi, HE Guo-ai, LIU Feng, HUANG Lan, JIANG Liang |
50 |
Numerical simulation for influence of super-cooling degree by phase-field method on microsegregation of nickel-copper alloy |
HOU Chao-jie, JIN Yu-chun, ZHAO Yu-hong, HOU Hua, TONG Le-le |
60 |
Effect of stack fault energy on grain refinement of Cu alloy during room temperature deformation and subsequent annealing |
LI Yi, ZHANG Xiang-kai, HE Ke-jian, YANG Xu-yue |
66 |
Functional Materials |
Current research status and prospect of brazing filler metals for aluminum and aluminum alloys |
NIU Zhi-wei, HUANG Ji-hua, XU Fang-zhao, LIU Kai-kai, CHEN Shu-hai, ZHAO Xing-ke |
77 |
Phase structure stability and thermal decomposition mechanism of CrAlN hard cutting tool coating |
ZHANG Jian, TANG Wang, MAO Cong, TANG Kun, YU Xiao-feng, LONG Chun-guang, PENG Ping |
88 |
Microstructure and tribological properties of WSx/a-C multilayer films with various modulation periods |
YANG Fang-er, SHI Yu-long, ZHANG Rong, SHEN Shu-kang, LU Ye, ZHENG Xiao-hua |
96 |
Characterization of CuIn0.7Ga0.3Se2 films prepared by electron-beam evaporation for thin film solar cell |
WANG Xing-xing, ZHANG Fu-qin, ZHOU Jun, ZHENG Ji-xiang, LI Bing-qian, LIU Yi |
103 |
Cyclic performance of negative electrode doped with carbon for lead-acid battery |
WANG Lian-wu, WANG Xian-you, HUANG Wei-guo, TONG Qing, WANG Liang-yong |
112 |
WO3/ZnS heterostructured photocatalysts prepared by grinding-calcination method and their photocatalytic performance |
FAN Qi-zhe, YU Chang-lin, LI Jia-de, LI Xin, ZHOU Wan-qin |
118 |
Electrical contact behavior of W-30Cu contact material under direct current condition |
WAN Cheng, LI Ji-wen, WANG Zhan, MA Dou-qin, ZHANG Hui-jie, WEI Shi-zhong, ZHANG Guo-shang, XU Liu-jie |
126 |
Mine Engineering, Metallurgical Engineering, Chemistry and Chemical Engineering |
Zircon U-Pb geochronology and Hf isotope characteristics of Xiaojinbao granite-porphyry body, Hebei Province, and its geological significance |
ZHANG Jian-guo, SHAO Yong-jun, LIU Zhong-fa, WANG Chen, ZOU Yan-hong, LI Hong-bin |
137 |
Distinction of platinum group elements geochemistry in Jinchuan Cu-Ni sulfide deposit and its implication for magmatic evolution |
ZENG Ren-yu, LAI Jian-qing, MAO Xian-cheng, ZHAO Yin, LIU Pin, ZHU Jia-wei, YUE Bin, AI Qi-xing |
149 |
Optimization of selective leaching technology of complex sulfide copper ore by response surface methodology |
LIAO Ya-long, ZHOU Juan, HUANG Fei-rong, WANG Yi-yang |
164 |
Optimization analysis of stope mining sequence based on mixed integer programming |
WANG Li-guan, REN Zhu-li, PAN Chuan-peng, CHEN Xin |
173 |
Transport resistance characteristic of paste pipeline considering effect of wall slip |
WU Ai-xiang, CHENG Hai-yong, WANG Yi-ming, WANG Hong-jiang, LIU Xiao-hui, LI Gong-cheng |
180 |
Mapping relationship between multicomponent matte formating behavior and content in copper oxygen bottom blowing bath smelting process |
WANG Qin-meng, GUO Xue-yi, LIAO Li-le, TIAN Qing-hua, ZHANG Yong-zhu |
188 |
Mechanisms and kinetics on reductive leaching of zinc from zinc neutral leaching residue |
ZHANG Chun, MIN Xiao-bo, ZHANG Jian-qiang, WANG Mi, LI Yuan-cheng |
197 |
Effect of feeding order on preparation of Al-Ti-B master alloy by fluoride salt method |
LIAO Cheng-wei, CHEN Wen-tian, CHEN Huan, FU Jian-ping, PAN Chun-xu |
204 |
Roasting pretreatment of iron-sinking slag and zinc leaching residue in zinc hydrometallurgy |
LIU Yang, TAN Jun, YIN Zhou-lan, LIU Chang-qing, CHEN Qi-yuan, ZHANG Ping-min, LIAO Zhou, WANG Xin-hao |
212 |
Oxygen pressure leaching of low-grade Pt-Pd concentrate |
LIU Zhi-qiang, WANG Wu, CAO Hong-yang, ZHOU Xiang-qian, ZHANG Kui-fang, QIU Xian-yang |
223 |
Analysis of microbial community structure of uranium-resistant granular sludge |
ZENG Tao-tao, LU Hui-zhen, LIU Ying-jiu, LIU Jin-xiang, RONG Li-shan, MA Hua-long, XIE Shui-bo |
233 |