Structural Materials |
Effect of twin boundary on static recrystallization of AZ31 magnesium alloy |
DING Xue-zheng, LIU Tian-mo, CHEN Jian, ZHANG Yu, LU Li-wei |
1 |
Effects of heat treatment on microstructure and microhardness of Mg-3Sn-1Y alloy |
XU Chun-jie, TU Tao, MA Tao, YU ling, ZHANG Zhong-ming, WANG Jin-cheng |
9 |
Effect of second phase particles on localized corrosion of Mg-Gd-Y-Nd-Zr alloy |
LIU Jun, CHEN Ming-an, MA Cong-cong, HUANG Yu-di, ZHANG Xin-ming, DENG Yun-lai |
15 |
Comparison of microstructures and properties of aluminum alloy between expendable pattern shell casting with vacuum and low-pressure and lost foam casting |
JIANG Wen-ming, FAN Zi-tian, LIU De-jun |
22 |
Crack arrest of Al-Mg alloy component with cracks by electromagnetic heating |
FU Yu-ming, WANG Jun-li, ZHENG Li-juan, XIANG Long, ZHANG Jin-sen |
29 |
Effect of precipitation state on fatigue process and fracture characteristics of Al-Mg-Si-Cu alloy |
HUANG Chang-jun, LIU Chun-hui, CHEN Jiang-hua, FENG Jia-ni, SANG Yi, LIAO Yuan-fei, CHEN Gang |
35 |
Microstructure evolution and dynamic recrystallization model of 7085 aluminum alloy during hot deformation |
CHEN Xue-hai, CHEN Kang-hua, DONG Peng-xuan, PENG Guo-sheng, CHEN Song-yi |
44 |
Mechanism of grain refinement of aluminum alloy achieved by low frequency electromagnetic casting process |
ZUO Yu-bo, ZHAO Zhi-hao, ZHU Qing-feng, CUI Jian-zhong |
51 |
Influence of zirconia sol on microarc oxidation process of aluminum alloys |
WANG Xiao-fang, LI Wei-ping, LIU Hui-cong, ZHU Li-qun |
56 |
Solidified microstructure of SiCp/Al composites bonds under ultrasonic vibration and their fracture characteristics |
XU Zhi-wu, MA Xing, MA Lin, YAN Jiu-chun, YANG Shi-qin, DU Shan-yi |
63 |
Microscopic phase-field simulation of composition evolution of heterointerfaces in Ni75AlxV25-x alloys |
ZHANG Ming-yi, YANG Kun, CHEN Zheng, WANG Yong-xin, ZHANG Jia-zhen |
73 |
Hot tearing susceptibility analysis and prediction of K418 superalloy for auto turbocharger turbine wheel |
SHI Zhao-xia, DONG Jian-xin, ZHANG Mai-cang, ZHENG Lei |
82 |
Flow and distribution of reinforced particulates in A356/SiCp vertical upwards suction casting |
SUN Feng-zhen, ZHAO Hai-dong, ZHAO Yu, DONG Pu-yun, CHEN Fei-fan |
91 |
Effect of CeO2 on microstructure and oxidation resistance of silicide coatings prepared on Nb-silicide-based ultrahigh temperature alloy |
ZHANG Yi, GUO Xi-ping |
99 |
Influence of heat treatment regimes on microstructure and creep properties of GH4169G alloy |
TIAN Su-gui, WANG Xin, LIU Chen, SUN Wen-ru |
108 |
Flow stress behavior of electroformed Ni-W alloy under hot compression deformation |
CHENG Sheng-wei, TIAN Wen-huai |
116 |
Microstructure and fatigue properties of Ti-6Al-4V titanium alloy treated by wet shot peening of ceramic beads |
CHEN Guo-qing, TIAN Tang-yong, ZHANG Xin-hua, LI Zhi-qiang, ZHOU Wen-long |
122 |
Synthesis and electrical properties of p-CuCr0.91Mg0.09O2/n-Si p-n junction |
DONG Guo-bo, ZHANG Ming, LI Yang-chao, WANG Mei, LI Ying-zi, LI Chao-rong, HUANG An-ping, YAN Hui |
128 |
Functional Materials |
Synthesis of LiNi0.8Co0.15Al0.05O2 cathode materials under elevated oxygen pressure |
LIU Wan-min, HU Guo-rong, PENG Zhong-dong , DU Ke, CAO Yan-bing, LIU Qiang, HUANG Jin-long |
133 |
Synthesis and thermodynamic analysis of La0.7Sr0.3Cr0.87Y0.13O3?δ prepared by EDTA-citrate complexing method |
YAN Han, ZHU Xiu-fang, ZHONG Qin, TAN Wen-yi |
141 |
Effects of organic agents on electrodeposition of bismuth in alkalinity solutions |
OU Qing-hai, DAI Ya-tang, ZHANG Huan, MA Li, MA Huan, SHEN Zhen |
147 |
Selection of fiber reinforcement for NiFe2O4-based inert anode materials in aluminum electrolysis |
HUA Zhong-sheng, YAO Guang-chun, LONG Xiu-li, WANG Hai-chuan, ZHAO Zhuo |
154 |
Preparation of SrZrO3 (SZO) buffer layer for coated conductors by polymer-assisted chemical solution deposition method |
ZHANG Xin, WANG Wen-tao, ZHANG Yong, ZHANG Min, ZHANG Han, LEI Ming, ZHAO Yong |
162 |
Performance of nickel ferrite replaced by different ions and optimization design of absorbing coating |
LIU Yuan, LIU Xiang-xuan, WANG Xuan-jun, ZHANG Ze-yang, LI Rong, GUO Lei |
168 |
In-situ preparation of compound oxidation scales on HP40 alloy |
YAN Lei, LIU Jing-lei, XU Hong, REN Yan-lun |
175 |
Research progress on fabrication of Li2TiO3 solid tritium breeder materials |
LI Yun-jiao, XU Cang, LI Lin, WANG Xuan-yu, KONG Long |
182 |
Interface of copper cladding aluminum composite materials with rectangle section fabricated by horizontal core-filling continuous casting and its evolvement in rolling process |
WU Yong-fu, LIU Xin-hua, XIE Jian-xin |
191 |
Effect of silicon content of substrate on wear properties of spray-deposited SiCp/Al-Si functionally gradient composites |
SU Bin, YAN Hong-ge, CHEN Ji-hua, CHEN Gang, DU Jia-qing |
201 |
Crystallization behavior of CuYSi-Mg60Cu30Y10 bulk amorphous alloy matrix composite |
SHAO Yang, CHEN Gang, ZHAO Yu-tao |
212 |
Simulation of electrodeposition process based on electromagnetic coupling with flow field |
WU Meng-hua, LIU Xin-gong, WANG Yuan-gang, JIA Wei-ping |
219 |
Mine Engineering, Metallurgical Engineering, Chemistry and Chemical Engineering |
Craft of wash-classification of heap leaching used in high-clay copper oxide ore |
WANG Shao-yong, WU Ai-xiang, WANG Hong-jiang, YIN Sheng-hua, GU Xiao-chun |
229 |
Flotation separation of magnetic separation concentrate of refractory hematite containing carbonate with enhanced dispersion |
LUO Xi-mei, YIN Wan-zhong, YAO Jin, SUN Chuan-yao, CAO Yang, MA Ying-qiang, HOU Ying |
238 |
Innovative technology for preparing lead and zinc concentrates from cyanide tailing derivatives |
WANG Yang, LI Shi-xiong, ZHU Xiang-dong, YU Zhi-quan |
247 |
Effect of free caustic alkali on agglomeration in seeded precipitation of sodium aluminate solution |
XU Rong-guang, WANG Zhi, GONG Xu-zhong, ZHANG Juan |
254 |
Synergies between archaea Ferroplasma thermophilum and two moderately thermophilic bacteria under stress of yeast extract or Cu2+ |
ZHANG Li-juan, JI Hou-guo, WANG Yu-guang, WAN Li-li, ZHOU Hong-bo |
265 |
Effect of Acidithiobacillus ferrooxidans on pyrite oxidation by ferric iron under aerobic and anaerobic conditions |
LIU Xin-wei , FENG Ya-li, LI Hao-ran , YANG Zhi-chao, CAI Zhen-lei |
274 |
Aminated modification of poly(m-phenylenediamine) and its application to adsorption of SO42- |
WANG Yun-yan, SANG Pei-lun, WANG Hai-ying, ZHANG Li-yuan, SU Zhen |
282 |
Synthesis, characterization and properties of 3,3'-diethyl-1,1'-oxydiethylenedicarbonylbis(thiourea) |
LIU Guang-Yi, REN Heng, ZHAN Jin-Hua, ZHONG Hong |
290 |