Structural Materials |
Grain orientation and texture evolution of AZ31 magnesium alloy during hot compression |
LIU Xiao, LOU Yan, LI Luo-xing, ZHU Bi-wu, HE Feng-yi |
2141 |
Microstructure and mechanical properties of as-cast Mg-Sn-Si-Sr alloys |
QIU Ke-qiang, HAO Shuai, YOU Jun-hua, REN Ying-lei |
2148 |
Effect of step-homogenization on microstructures and mechanical properties of 7055 aluminum alloy |
ZHANG Xin-ming, LU Yan-hong, LIU Sheng-dan, LIU Wen-jun, LI Hong-ping |
2154 |
Microstructure and mechanical properties along fluidity length of thin-wall aluminum alloy under high pressure die casting conditions |
ZHU Bi-wu, LI Luo-xing, LIU Xiao, WANG Shui-ping, ZHANG Li-qiang |
2163 |
Effect of artificial ageing on intergranular corrosion of 6005A Al alloy |
SHENG Xiao-fei, YANG Wen-chao, WANG Ming-pu, LI Zhou, GONG Jing, PENG Cheng |
2174 |
Effects of heat treatment process on tensile and corrosion properties of 2A97 Al-Li alloy |
LIN Yi, ZHENG Zi-qiao, HAN Ye, ZHANG Hai-feng |
2181 |
Effect of cold drawing on Vickers hardness of Al-Zr-(RE) alloys and artificial neural network prediction |
ZANG Bing, YI Dan-qing, SUN Shun-ping, WANG Bin, LIU Huan, LIU Gong-qi |
2187 |
Effects of Mg and Mn element on microstructure and mechanical properties of Al-Si alloy |
HUANG Xiao-feng, FENG Kai, XIE Rui |
2196 |
Formation mechanism of primary carbides in FGH96 superalloy |
CHAI Guo-ming, CHEN Xi-chun, GUO Han-jie |
2205 |
Effect of element S on corrosion behavior of nickel-base alloy G3 in high temperature and high pressure environments containing H2S/CO2 |
QIAN Jin-sen, CHEN Chang-feng, LI Shen-yi, ZHENG Shu-qi, WENG Yong-ji |
2214 |
Hot compressive behavior of Ti-3.0Al-3.7Cr-2.0Fe low cost titanium alloy |
WANG Guo, HUI Song-xiao, YE Wen-jun, MI Xu-jun |
2223 |
Properties and microstructure evolution of hot rolled-quenched Cu-Cr system alloys |
XIA Cheng-dong, WANG Ming-pu, ZHANG Wan, JIA Yan-lin, WU Yi-feng, DONG Qi-yi, WEI Hai-gen,
| 2230 |
Effect of cooling structure on stress distribution of continuous casting mold copper plates |
MENG Xiang-ning, WANG Wei-ling, ZHU Miao-yong |
2238 |
Effects of Y, Ta and Cr on thermal corrosion behavior of Ni-10%Fe-10%Al-10%Cu alloy at 850 ℃ in cryolite melten atmosphere |
LI Bin, LUO Bing-hui, ZHAN Ge, ZHOU Ke-chao, BAI Zhen-hai |
2246 |
Microstructure and properties of laser alloyed Mn-Al2O3 layer on stainless steel |
LI Peng, SUN Gui-fang, ZHANG Wei, LIU Wei-xiang, ZHANG Yong-kang, ZHANG Man-kui |
2253 |
Effect of h-BN content on sliding friction behavior of C/C-BN fabricated by mould pressing |
GE Yi-cheng, LUO Jian, MAO Pei-ling, LEI Bao-lin, YI Mao-zhong |
2260 |
Functional Materials |
Mechanisms and questions of tin whisker growth |
ZHAO Zi-shou, XIAN Ai-ping |
2267 |
Preparation process and performance of spinel LiMn2O4 using Mn3O4 as precursor |
WAGN Ying-ping, WANG Xian-you, KUI Xiao-shan, WEI Qi-liang, YANG Xiu-kang, YANG Shun-yi, SHU Hong-bo, BAI Y |
2276 |
Synthesis of high-performance LiFePO4/C by liquid nitrogen quenching method |
ZHANG Ming, YIN Zhou-lan, GUO Xue-yi, ZHANG Bao |
2283 |
Effect of target current on corrosion resistance of AlSn20/C coating deposited by magnetron sputtering |
GUO Qiao-qin, JIANG Bai-ling, LI Jian-ping |
2289 |
Thermal decomposition of precursor gel and crystalline mechanism of BeO nanopowders synthesized by polyacrylamide gel method |
WANG Xiao-feng, WANG Ri-chu, PENG Chao-qun, LI Ting-ting, LIU Bing |
2295 |
Effects of sintering aids Y2O3 and Pr6O11 on relative density and thermal conductivity of Al2O3 ceramics |
LIU Bing, PENG Chao-qun, WANG Ri-chu, WANG Xiao-feng, LI Ting-ting, WANG Zhi-yong |
2302 |
Microstructures and properties of Al2O3/TiCN-Ni-Ti composites fabricated by hot pressing |
LI Qian, SUN Xu-dong, XIU Zhi-meng |
2311 |
Electronic structure of LiFePO4 doped with Ni and Mg |
ZHANG Dong-yun, ZHANG Pei-xin, SONG Shen-hua, HUI Wen-bin, HUANG Lei, REN Xiang-zhong |
2317 |
Fabrication of TiO2 nanotube arrays in organic electrolyte and its photoelectric performances |
TAO Hai-jun, TAO Jie, WANG Tao, BAO Zu-guo |
2326 |
Numerical simulation of melt front and filed profile in powder co-injection molding filling process |
FENG Juan, HE Hao, LI Yi-min, WANG Guang-yao |
2333 |
Fabrication and properties of micron cell porous Al |
HUANG Guo-tao, ZUO Xiao-qing, LU Jian-sheng, ZHOU Yun |
2340 |
Mine |
Calibration of three-dimensional maximum dimensionless stress intensity factor of holed flattened Brazilion disc specimen |
ZHANG Sheng, LIANG Ya-lei |
2347 |
Effect of magnesium ion concentration on growth kinetics of Thiobacillus ferroxidans |
LIU Xin-wei, FENG Ya-li, LI Hao-ran, CAI Zhen-lei, YANG Zhi-chao |
2353 |
Extraction and preparation of tellurium from neutralization sludge of process for treatment of anode slime |
ZHENG Ya-jie, LE Hong-chun, SUN Zhao-ming |
2360 |
Removal of fluoride and lead in wastewater with iron-bioflocculant |
MIAO Yu, MIN Xiao-bo, CHAI Li-yuan, YIN Yi-nan |
2366 |
Mechanisms of extraction and separation of zirconium and hafnium using mixtures of DIBK and TBP |
XU Zhi-gao, WANG Li-jun, WU Yan-ke, CHI Ru-an, ZHANG Li |
2374 |
Grey Fuzzy-LSSVM forecasting model and its application in cobalt removal from zinc electrolyte |
WU Tie-bin, YANG Chun-hua, SUN Bei, ZHU Hong-qiu, LI Yong-gang |
2382 |
Preparation of high tap-density Li4Ti5O12 anode material with
two-step calcination process |
GUO Zhi-hong, LI Jie, ZHANG Zhi-an, LAI Yan-qing |
2387 |
Influence of lance arrangement on bottom-blowing bath smelting process |
YAN Hong-jie, LIU Fang-kan, ZHANG Zhen-yang, GAO Qiang, LIU Liu, CUI Zhi-xiang, SHEN Dian-bang |
2393 |
Influence of crystalline silicon substrate parameters on solar cell output properties |
LI You-zhen, CHEN Yong-min |
2401 |
Preparation of Al-Ca alloys and their properties for hydrogen generation through hydrolysis |
HAO Ming-ming, CHEN Xing-yu, ZHAO Zhong-wei, TIAN Zhong-liang |
2407 |