Structural Materials |
Mechanical properties and microstructures of
AZ31 magnesium alloy after high and low temperature treatment |
ZHANG Xue-feng­,, WU Guo-hua, DING Wen-jiang |
2979 |
Constitutive equation during hot compression deformation of
Mg-Gd-Y-Zr alloy |
ZHANG Xin-ming, WU Yi-ping, DENG Yun-lai, TANG Chang-ping |
2987 |
Effect of heat treatment on microstructure and resistance to
stress corrosion cracking of aluminum alloy 2056 |
GE Jing-xuan, ZHENG Zi-qiao, LUO Xian-fu |
2995 |
Effect of Al-Mn-Ti-P-Cu and Mg on
microstructure and wear resistance of hypereutectic Al-25Si alloy |
ZHAO Gao-zhan, XU Chun-xiang, ZHANG Jin-shan, YANG Yong-jun, LI Wen-hai |
3002 |
Constitutive parameters identification of
6061 aluminum alloy during hot deformation with inverse methods |
WANG Guan, LI Luo-xing, LIU Bo, LI Xiao-qing |
3011 |
Effect of stress aging on mechanical properties and
microstructures of 2E12 aluminum alloy |
WANG Hong-wei, YI Dan-qing, CAI Jin-ling, WANG Bin |
3019 |
Microstructural evolution and grain refinement of
1060 pure Al processed by constrained groove pressing |
YANG Kai-huai, PENG Kai-ping, CHEN Wen-zhe |
3026 |
Effect of mixing ways on primary silicon of hypereutectic Al-Si alloys during controlled diffusion solidification |
LI Xia, LI Yuan-dong, MA Ying, CHEN Ti-jun, HAO Yuan |
3033 |
Effect of thermal exposure on microstructure and
mechanical properties of Ti-44Al-4Nb-4Zr-0.2Si-1B alloy |
ZHU Xiao-long, HUANG Ze-wen |
3042 |
Effect of long-term thermal exposure on microstructure and
mechanical properties of Ti-44Al-4Nb-4Hf-1B alloy |
YIN Quan, HUANG Ze-wen |
3050 |
Microstructures and intergranular corrosion behavior of
2××× series Al-alloys with high Cu/Mg ratio |
LIU Yao-qiong, ZHENG Zi-qiao, LI Shi-cheng, LIN Li, HUANG Yu-jin |
3057 |
Preparation and siliconizing mechanism of Fe3Si type silicide layer deposited on AISI 304 stainless steel |
AN Liang, JIA Jian-gang, MA Qin, LI Peng |
3064 |
Numerical simulation and experimental research on
pure copper by twist extrusion |
WANG Cheng, LI Ping, XUE Ke-min, LI Xiao, ZHANG Kai |
3071 |
Microstructure and mechanical property of joint by TIG welding- brazing with dual weld pools for steel/aluminum dissimilar metals |
CHEN Shu-hai, MA Ke, HUANG Ji-hua, XIA Jun, ZHANG Hua, ZHAO Xing-ke |
3076 |
Functional Materials |
Mechanical separation and recovery process of
anode materials from spent lithium-ion batteries |
ZHOU Xu, ZHU Shu-guang, CIXI La-mu, HE Wen-zhi, LI Guang-ming, HUANG Ju-wen |
3082 |
Preparation and electrochemical performance of calcium carbide skeleton carbon anode material for lithium ion battery |
LI Jiao-jiao, WANG Xian-you, YANG Shun-yi, LONG Wan-mei, WANG Hong, BAI Li, WU Qiang |
3087 |
Polarity effect of electromigration and its influence on
tensile properties of Sn-3.0Ag-0.5Cu lead-free solder joint |
YAO Jian, WEI Guo-qiang, SHI Yong-hua, GU Feng |
3094 |
Synthesis, charaterization and photocatalytic activities of
Al-doped TiO2 mesoporous materials |
LIU Guo-cong, DONG Hui, LIU Shao-you |
3100 |
Reciprocating frictional properties of C/C composite under
different frequencies |
GE Yi-cheng, YI Mao-zhong, PENG Ke, YANG Lin, LEI Bao-ling |
3108 |
High-temperature properties of Fe-Ni based coating doped with RE |
ZHANG Li-min, LIU Bang-wu, LIU Shu-feng, XIA Wen, WANG Shu-ming |
3115 |
Phase transition and grain growth kinetics of
nanocrystalline 8% yttria stabilized zirconia powder |
LIU Chun-bo, YU Lian-sheng, JIANG Xian-liang |
3120 |
Mine |
Thermodynamics analysis effect of silicon dioxide in dolomite on
magnesium production by silicothermic process |
DOU Shao-xu, YOU Guo-qiang, LI Ai-ting, LONG Si-yuan, ZHANG Zong-he |
3129 |
Innovative process for preparing ferronickel materials from
laterite ore by reduction roasting-magnetic separation |
LI Guang-hui, RAO Ming-jun, JIANG Tao, HUANG Qing-qing, SHI Tang-ming, ZHANG Yuan-bo |
3137 |
Mass action concentration calculation model for
MgO-B2O3 slag melt |
WANG Guang, WANG Jing-song, XUE Qing-guo, DING Yin-gui |
3143 |
Soft sensor of key index for flotation process based on
sparse multiple kernels least squares support vector machines |
YANG Chun-hua, REN Hui-feng, XU Can-hui, GUI Wei-hua |
3149 |
Back-reactions of carbothermal reduction of alumina in vacuum |
FENG Yue-bin, YANG Bin, DAI Yong-nian |
3155 |
Vanadate removal from alkaline sodium chromate solution by adding lime |
ZHAO Dong-feng, TIAN Lü, DING Rui-feng, LIU Gui-hua, ZHOU Qiu-sheng, LI Xiao-bin, PENG Zhi-hong |
3162 |
Preparation and characterization of colored aluminum powder
Fe2O3/SiO2/Al by liquid deposition |
HAN Kai, ZHANG Ying-chao, YE Hong-qi |
3169 |
Morphology change and elements migration of bronze with
high tin content after soil corrosion |
TANG Qi, WANG Ju-lin, MA Jing-yu |
3175 |
Adsorptive removal of methylene blue dye wastewater from
aqueous solution using citric acid activated red mud |
HUANG Kai, LI Yi-fei, JIAO Shu-qiang, ZHU Hong-min |
3182 |
Effect of hydrothermal treatment on morphology of flower-like aluminum hydroxide sulfate product assembled by flakes |
FU Gao-feng, WANG Jing, LIU Yan, DING You-dong |
3189 |
Effect of particle size on
precipitation-dissolution equilibrium of CaF2 |
JIANG Ke, ZHOU Kang-gen, LI Cheng-wen |
3195 |
Thermodynamics of transformation process from SiCl4 to SiHCl3 |
HOU Yan-qing, XIE Gang, TAO Dong-ping, YU Xiao-hua, LI Rong-xing, SONG Dong-ming |
3202 |
Biosorption characteristics of Pb2+ by Pannonibacter phragmitetus T1 |
SU Yan-rong, CHAI Li-yuan, YANG Zhi-hui, YOU Xiang-yu, ZHU Yong-hua |
3211 |
Recovery of zinc and regeneration of lixiviant from
Zn2+-Ida2−-H2O system |
DOU Ai-chun, YANG Tian-zu, WU Jiang-hua, ZHANG Du-chao, YANG Ji-xing, WANG An |
3218 |