MATERIALS SCIENCE AND ENGINEERING |
Investigation of superplasticity in directionally solidified NiAl alloys |
GUO Jian-ting, ZHANG Guang-ye, DU Xing-hao |
521 |
Preparation and properties of high-temperature self-lubricating Ni3Al/graphite alloy |
ZHU Ding-yi, GUAN Xiang-feng, CHEN Li-juan, TANG Wei |
528 |
Atomic-scale computer simulation for early precipitation process of Ni75AlxV75-x alloys with lower Al concentration |
ZHAO Yu-hong, CHEN Zheng, WANG Yong-xin, TANG Li-ying |
534 |
Effect of surface morphology of micro-arc oxidation coatings of titanium alloy on bonding strength of coating/epoxy resin |
JIANG Bai-ling, ZHANG Ju-mei, SHI Hui-ying |
539 |
Mechanism of brazing flux reacting with oxide film of LY12 aluminum alloy |
XUE Song-bai, CHEN Wen-hua, LV Xiao-chun, QIAN Yi-yu |
543 |
Growth and microstructure of microarc oxidation coatings on titanium alloy in solution containing phosphate |
WANG Ya-ming, JIANG Bai-ling, GUO Li-xin, LEI Ting-quan |
548 |
Initial laws of atmospheric galvanic corrosion for magnesium alloys |
TONG Zhen-song, ZHANG Wei, LI Jiu-qing, CHENG Fei |
554 |
Electrochemical properties of anodized aluminum films insodium chloride solution |
ZHAO Xu-hui, ZUO Yu, ZHAO Jing-mao |
562 |
High strength and high electrical conductivity deformation-processed Cu-Fe in situ composites |
GE Ji-ping, YAO Zai-qi |
568 |
Size evaluation and fractal characteristic of nano-sized nickel powder by small angle X-ray scattering |
SHAO Yuan-zhi, REN Shan, ZHANG Qing-tang, WU Hui, CAI Zhi-su |
574 |
Effect of boron additive on microstructures and electrochemical properties of rare earth-based AB5 hydrogen storage alloy |
ZHANG Yang-huan, CHEN Mei-yan, WANG Xin-lin,WANG Guo-qing, QI Yan, LIN Yu-fang |
580 |
Asymmetry crystallization and magnetism of SmCo film |
ZHU Yao-min, LI Xiao-yuan, SONG Xiao-ping, CHEN Qiang |
587 |
Anti-oxidation and anti-corrosion properties of Ni-Fe-Cu inert metal anodes |
SHI Zhong-ning, XU Jun-li, QIU Zhu-xian, SHU Fang-xia |
591 |
Corrosion behavior of Cu-Zn-Al shape memory alloy in simulated uterine fluid |
CHEN Bang-yi, LIANG Cheng-hao, FU Dao-jun |
596 |
Fabrication and friction properties of Al2O3(p)/ZA35 composite with in-situ process |
NIU Yu-chao, BIAN Xiu-fang, GENG Hao-ran, WANG Wei-min |
602 |
Comparision analysis of melt temperature treatment of three typical Al-Si alloy |
ZHOU Zheng, TAO Jing-mei |
607 |
Effect of carbon particle sizes on microstructures of TiCp reinforced magnesium matrix composites by in situ reactive infiltration process |
DONG Qun, CHEN Li-qing, ZHAO Ming-jiu, BI Jing |
614 |
Form and refinement mechanism of element Er in Al-Zn-Mg alloy |
YANG Jun-jun, NIE Zuo-ren, JIN Tou-nan,RUAN Hai-qiong, ZUO Tie-yong |
620 |
Microstructural evolution of A2017 semi-solid alloys produced by SCR process |
WANG Shun-cheng, WEN Jing-lin, CHEN Yan-bo,LI Ying-long, CAO Fu-rong |
627 |
Effect of heat treatment technique on wear properties of HM59-2-1-0.5 alloy used in car synchro converter ring |
DU Ling-zhong, XU Bing-shi, DONG Shi-yun, DONG Qi-ming |
633 |
Pre-stretching process and its application in reducing residual stressof quenched 7075 aluminum alloy thick-plates |
KE Ying-lin, DONG Hui-yue |
639 |
Micro defects in tungsten carbide particulates reinforced steel matrix composites by electroslag melting and casting |
YOU Xian-qing, WANG Ji-cai, REN Hao |
646 |
Novel processing of tricathode plasma surface alloying and its application |
RONG Xing-fu, XU Zhong, SU Yong-an, QIN Zhi-yu, QIN Lin |
652 |
Characterization of deformation and semi-solid isothermal microstructures of AZ91D alloy for upsetting in SIMA process |
YAO Liang-yu, YUAN Sen, WANG Wu-xiao,JIANG Bai-ling, TANG Wen-ting |
660 |
Electroless plating of carbon nanotube with copper |
YUAN Hai-long, FENG Yi |
665 |
MINERAL PROCESSING, METALLURGY AN |
Density functional theory study of diaspore (α-AlOOH) bulk and (010) surface |
FENG Qi-ming, CHEN Yuan-dao, LU Yi-ping,CHEN Yun, OU Le-ming, ZHANG Guo-fan |
670 |
Mechanism of Cu2+ ion activation flotation of marmatite in absence and presence of ethyl xanthate |
ZHANG Qin, HU Yue-hua, GU Guo-Hua, XU Jing |
676 |
Mathematical model of current efficiency with anode current distribution in aluminum production |
ZENG Shui-ping, ZHANG Qiu-ping |
681 |
Kinetic analysis of non-isothermal decomposition of Sr(OH)2·8H2O |
LIU Xiang-guo, PENG Xiao-dong, XIE Wei-dong,LIU Jiang, QUAN Yan-yan |
686 |
Effect of organic amine on anodizing of magnesium alloys |
LUO Sheng-lian, ZHANG Tao, ZHOU Hai-hui, CHEN Jin-song,CHEN Jin-hua, KUANG Ya-fei |
691 |
Recovery of cobalt and lithium from spent lithium-ion secondary batteries |
WU Fang |
697 |
Thermodynamics properties of rare earth vapor complex NdAl3Br12 |
YU Jin, YANG Dong-mei, JIANG Jun-hui, WANG Zhi-chang |
702 |