Progress and application of C/C-SiC ceramic braking materials |
XIAO Peng, XIONG Xiang, ZHANG Hong-bo, HUANG Bai-yun |
667 |
Precipitation behavior of AA3003 aluminium alloy during annealing |
ZHANG Xin-ming, WU Wen-xiang, JIAN Xiong, ZHOU Zhuo-ping |
675 |
Fabrication and application of alumina nanoscale ordered array template |
WU Yu-cheng, MA Jie, XIE Ting, YAN Bo,HUANG Xin-min, LI Guang-hai, ZHANG Li-de |
680 |
Measurement of mechanical properties of Sn-Ag-Cu series lead-free solder alloy by using micro-indentation |
WANG Feng-jiang, QIAN Yi-yu, MA Xin |
688 |
Serration flow phenomenon of aluminum alloy used for can body stock |
PENG Kai-ping, CHEN Jia-liang, CHEN Wen-zhe, QIAN Kuang-wu |
694 |
Microstructure and mechanical properties of friction-stir welded joint of pure copper to brass |
LIU Xiao-wen, YANG Ning-ning, MU Yao-zhao, YAN Jun-hui |
700 |
Cycling stability of La-Mg-Ni system (PuNi3-type) hydrogen storage alloys prepared by casting and rapid quenching |
ZHANG Yang-huan, DONG Xiao-ping, WANG Guo-qing,GUO Shi-hai, REN Jiang-yuan, WANG Xin-lin |
705 |
Pitting behavior of SiCp/2024Al metal matrix composite |
HE Chun-lin, WANG Jian-ming, CAI Qing-kui |
711 |
Al powder coated with nanometer film |
YANG Yi, LI Feng-sheng, LIU Hong-ying |
716 |
Effect of particle size on microstructure and properties of high-silicon aluminum alloy |
GAN Wei-ping, CHEN Zhao-ke , YANG Fu-liang |
721 |
Effect of high-temperature pre-precipitation on microstructure, mechanical property and stress corrosion cracking of Al-Zn-Mg aluminum alloy |
HUANG Lan-ping, CHEN Kang-hua, LI Song, LIU Hong-wei |
727 |
Effect of microelement Sr on corrosion properties of Al-Mg-Si-Cu based alloy auto sheets |
LU Guang-xi, GUAN Shao-kang, CHEN Hai-jun, LIN Dun-wen |
734 |
Sintering and magnetic properties of mechanical alloying Fe73.5Cu1Nb3Si13.5B9 nanocrystalline powder |
LU Bin, YI Dan-qing, LIU Yan,LIU Hui-qun, WU Biao-li, WU Wei, MA Rui |
739 |
Microstructure and electrical resistivity of Cr-Si-Ni films deposited on Si substrates |
ZHANG Yu-qin, DONG Xian-ping, WU Jian-sheng |
746 |
Microstructure and mechanical properties of Cu-12%Ag filamentary composite |
ZHANG Lei, MENG Liang |
751 |
Coated cemented carbide with gradient structure |
ZHANG Wu-zhuang, LIU Yong, HE Yue-hui,YANG Jian-gao, LONG Zheng-yi |
757 |
Hot deformation and processing maps of 2618 aluminum alloy |
HUANG Guang-sheng, WANG Ling-yun, CHEN hua,HUANG Guang-jie, ZHANG Suo-quan |
763 |
Room-temperature tensile plasticity of BT18y titanium alloy with equiaxed structure and fully lamellar structure |
YANG Yi, HUANG Ai-jun, XU Feng, LI Ge-ping |
768 |
Stress-state analysis on strength of Al(OH)3 grain |
LI Wang-xing, HUA Shu-Gui, YIN Zhou-lan,YE Lu-sheng, LIU Ye-xiang |
775 |
Microstructure characterization of binary CeO2+SnO2 oxide coated titanium coatings |
WANG Xiao-kang, TANG Dian, ZHANG Teng, SHAO Yan-qun |
782 |
Micromagnetic simulation of magnetization reversal mechanism in magnetic nanowires |
ZHANG La-mei, GUO Guang-hua, LIU Zheng-fang |
787 |
Preparation and electrochemical properties of SnO2-graphite composites by homogeneous precipitation technique |
MA Ming-you, HE Ze-qiang, XIONG Li-zhi,LI Xin-hai, XIAO Zhuo-bing, WU Xian-ming, LIU Wen-ping |
793 |
Influence of spray-welding technology on microstructures and properties of Ni-based coating on titanium substrate |
WANG Hong-yu, ZHANG Xue-feng, XU Xiao-jing,LIU Xi, CHEN Kang-min, PAN Li |
799 |
Extraction of copper from nickel and cobalt sulfate solution with BK992 |
GUO Hua-jun, WANG Xiao-qiong, LI Xin-hai, ZHANG Xin-ming, WANG Zhi-xing, PENG Wen-jie, XU Sheng-fei |
806 |
Oxidation dissolution behavior of copper in FeO-rich slag |
LI Chang-rong, HONG Xin, ZHENG Shao-bo, JIANG Guo-chang |
813 |
Sol-gel preparation and photocatalytic activities of TiO2 nanoparticles |
QIAN Dong, YAN Zao-xue, SHI Mao,CHEN Qi-yuan, LU Zhou-guang, HUANG Ke-long, LIU Yong |
817 |