Microstructures and evolution mechanism of highly undercooled
Ni-Pb hypermonotectic alloy① |
XIE Hui(谢 辉), YANG Gen-cang(杨根仓), HAO Wei-xin(郝维新),FAN Jian-feng(樊建锋), ZHU Yao-chan(朱耀产), XU Li-jun(许丽君) |
417 |
Electrical resistivity of NiFe2O4ceramic and NiFe2O4based cermets① |
TIAN Zhong-liang(田忠良), LAI Yan-qing(赖延清), LI Jie(李劼),ZHANG Gang(张 刚), LIU Ye-xiang(刘业翔) |
421 |
a-C∶F∶H films prepared by PECVD① |
LIU Xiong-fei(刘雄飞), XIAO Jian-rong(肖剑荣), JIAN Xian-zhong(简献忠),WANG Jin-bin(王金斌), GAO Jin-ding(高金定) |
426 |
Mechanism of toughening and strengthening of
Si3N4/SiC/ZrO2nanocomposites① |
YAN Jian-wu(晏建武), ZHOU Ji-cheng(周继承), LU Shi-qiang(鲁世强),LI Wei-chao(李卫超), ZHANG Zhi-hua(张志华) |
430 |
Electrochemical hydrogen storage properties of La0.95Mg2.05Ni9alloy
prepared by mechanical alloying① |
MENG Mian-wu(蒙冕武), LIU Xin-yu(刘心宇), CHENG Jun(成 钧), ZHOUHua-ying(周怀营) |
436 |
Electrochemical production of Sn-filled carbon
nanotubes in molten salts① |
HUANG Hui(黄 辉), ZHANG Wen-kui(张文魁), LI Mei-chao(李美超),GAN Yong-ping(甘永平), MA Chun-an(马淳安), ZHANG Xiao-bin(张孝彬) |
441 |
Degradation analysis of nickel/metal hydride battery and
its electrodes materials① |
LI Li(李 丽), WU Feng(吴 锋), YANG Kai(杨 凯) |
446 |
Microstructure and properties of liquid film solution-diffusion
welding interface for ZCuBe2.5 Alloy① |
XU Jin-feng(徐锦锋), ZHAI Qiu-ya(翟秋亚), QIAN Han-cheng(钱翰城) |
451 |
Hydrothermal synthesis of Zn4SO4(OH)6·5H2O and its application
as anode material for nickel/zinc batteries① |
CHEN Guo-ping(陈国平), SANG Shang-bin(桑商斌), HUANG Ke-long(黄可龙),TANG You-gen(唐有根), TANG Zan-qian(唐赞谦), YANG Zhan-hong(杨 |
456 |
Effects of rapid heating cyclic heat treatment on microstructures and
compression mechanical properties of TiAl-based alloy① |
PENG Chao-qun(彭超群), HE Yue-hui(贺跃辉), HUANG Bai-yun(黄伯云), P.K.Liaw |
459 |
Friction behavior of Al-Cu-Fe-B polycrystalline quasicrystals① |
ZHOU Xi-ying(周细应), LI Pei-yao(李培耀), LUO Jun-ming(罗军明),QIAN Shi-qiang(钱士强), Tong Jian-hua(童建华) |
464 |
Synthesis and character of spinel LiMn2O4① |
XU Cha-qing(徐茶清), TIAN Yan-wen(田彦文), ZHAI Yu-chun(翟玉春),YU Bing(于 冰), GUO Zhao-jing(郭兆靖) |
470 |
Microstructures and properties of welded joint of TiNi shape memory alloy and stainless steel① |
QIU Xiao-ming(邱小明), SUN Da-qian(孙大谦), LI Ming-gao(李明高), LIU Wei-hong(刘卫红) |
475 |
Mechanical properties of Cf/Si-O-C composites prepared
by hot-pressing assisted pyrolysis of polysiloxane① |
MA Qing-song(马青松), CHEN Zhao-hui(陈朝辉), ZHENG Wen-wei(郑文伟),HU Hai-feng(胡海峰) |
480 |
Effect of sintering on microstructures and properties of
sub-micron Ti(C,N)-based cermets① |
YU Li-xin(余立新), XIONG Wei-hao(熊惟皓), ZHENG Yong(郑 勇), LI Guo-an(李国安) |
485 |
Modeling of microstructural evolution and flow stress of
aluminium alloy during thermomechanical process① |
SHEN Jian(沈 健), G.Gottstein |
491 |
Effect of heat treatment on eutectic silicon morphology and
mechanical property of Al-Si-Cu-Mg cast alloys① |
LI Run-xia(李润霞), LI Rong-de(李荣德), ZHAO Yu-hua(赵玉华), LI Chen-xi(李晨曦),SUN Xiao-feng(孙晓峰), GUAN Heng-rong(管 |
496 |
Microstructure of Al2O3/SiO2ceramic core nano-composites① |
ZHAO Hong-liang(赵红亮), WENG Kang-rong(翁康荣), GUAN Shao-kang(关绍康),LOU Lang-hong(楼琅洪), LI Ying-ao(李英敖), ZHAO Hui- |
501 |
Influence of heat treatment regimes on microstructures and
fracture characteristics of 7055Al alloy containing Ag① |
LI Hai(李 海), ZHENG Zi-qiao(郑子樵), WANG Zhi-xiu(王芝秀) |
505 |
Characterization of phase transformation and microstructure of nano
hard phase Ti(C,N)-based cermet by spark plasma sintering① |
FENG Ping(丰 平), XIONG Wei-hao(熊惟皓), LI Peng(李 鹏),YU Li-xin(余立新), XIA Yang-hua(夏阳华) |
510 |
Surface alloying of Cu with Ti by double glow discharge process① |
YUAN Qing-long(袁庆龙), CHI Cheng-zhong(池成忠), SU Yong-an(苏永安),XU Zhong(徐 重), TNAG Bin(唐 宾) |
516 |
Dechromisation of Cu-Cr alloy in acid solutions containing Cl-① |
XU Tao(许 涛), CHEN Ling(陈 玲), CHEN Yan(谌 岩),YU Sheng-xue(于升学), LIU Bin(刘 彬), LIU Jian-hua(刘建华) |
520 |
Equal channel angular deformation process and its
neuro-simulation for fine-grained magnesium alloy① |
LUO Peng(罗 蓬), HU Qiao-dan(胡侨丹), WU Xiao-lin, XIA Ke-nong |
525 |
Purifying effect of new flux on magnesium alloy① |
GAO Hong-tao(高洪涛), WU Guo-hua(吴国华), DING Wen-jiang(丁文江), ZHU Yan-ping(朱燕萍) |
530 |
Microstructure and properties of submicron-scale TiC particle reinforced
titanium matrix composites prepared by shock wave consolidation① |
SUN Qiao-yan(孙巧艳), ZHU Rui-hua(朱蕊花), GU Hai-cheng(顾海澄) |
537 |
Corrosion behavior of NiCr alloys
in HCl-containing oxidation atmosphere at 700 800℃① |
ZHANG Ke(张 轲), NIU Yan(牛 焱), PAN Tai-jun(潘太军), WU Wei-tao(吴维山文) |
543 |
Microstructure and mechanical properties of wrought magnesium
alloy AZ31B welded by laser-TIG hybrid① |
LIU Li-ming(刘黎明), SONG Gang(宋 刚),WANG Ji-feng(王继锋), LIANG Guo-li(梁国俐) |
550 |
Boundary trend ofα1/(α1+α2) phase region
at lower Cu side in Al-Zn-Cu system① |
CHEN hui(陈 辉), REN Yu-ping(任玉平), XIN xin(信 昕), HAO Shi-ming(郝士明) |
556 |
Copper hydrometallurgy—current status, preliminary economics, future direction and positioning versus smelting① |
J. Peacey, GUO Xian-jian, E. Robles |
560 |
Bioleaching of marmatite flotation concentrate byAcidithiobacillus
ferrooxidansandLeptospirillum ferrooxidans① |
SHI Shao-yuan(石绍渊), FANG Zhao-heng(方兆珩) |
569 |
Collector matching in origin potential flotation① |
GU Guo-hua(顾帼华), WANG Hui(王 晖), QIU Guan-zhou(邱冠周), HU yue-hua(胡岳华) |
576 |
Application of extended DLVO theory in emulsion stability research① |
LIU Xiao-rong(刘晓荣), QIU Guan-zhou(邱冠周), HU Yue-hua(胡岳华),YANG Jun-he(杨俊和), JIN Ming-lin(金鸣林) |
582 |
S2-behaviors analysis in leaching SrS and precipitating high
purity SrCO3by reduction-decomposition process① |
PENG Xiao-dong(彭晓东), LIU Xiang-guo(刘相果), XIE Wei-dong(谢卫东),LIU Jiang(刘 江), JIA Shang-yuan(贾上远), QUAN Yan-yan(权燕燕) |
587 |
Kinetics of isothermal reduction of
stainless steelmaking dust pellets① |
PENG Ji(彭 及), PENG Bing(彭 兵), YU Di(余 笛), TANG Mo-tang(唐谟堂),SONG Hai-chen(宋海琛), J. Lobel, J. A. Kozinski< |
593 |
Selective removal of nickel from iron substrate by non-cyanide strippers① |
LI De-liang(李德良), WU Xiao-fu(吴晓芙), WANG Dian-zuo(王淀佐), J. A. Finch |
599 |
An impedance response model for inhibitory effect of antibiotics
on bacterial growth in biometallurgy① |
TAO Han(陶 菡), WEI Wan-zhi(魏万之), ZHANG Shu-fen(张书芬),ZHANG Jing-zhong(张进忠), MAO You-an(毛友安) |
603 |
Mechanisms of flotation separation of diaspore and
kaolinite by quaternary ammonium salt DTAL① |
CHEN Xiang-qing(陈湘清), HU Yue-hua(胡岳华), WANG Yu-hua(王毓华) |
609 |
Mathematical modeling taking into account of intrinsic kinetic properties
of cylinder-type vanadium catalyst① |
CHEN Zhen-xing(陈振兴), LI Hong-gui(李洪桂), WANG Ling-sen(王零森) |
613 |
Corrosion behavior of two heat treatment
Al-Zn-Mg-Cu alloys in different intergranular corrosion solution① |
CAO Fa-he(曹发和), ZHANG Zhao(张 昭), LI Jin-feng(李劲风),CHENG Ying-liang(程英亮), ZHANG Jian-qing(张鉴清), CAO Chu-nan(曹楚南) |
619 |
Anodic reaction kinetics of electrowinning zinc in
system of Zn(Ⅱ)-NH3-NH4Cl-H2O① |
YANG Sheng-hai(杨声海), TANG Mo-tang(唐谟堂),CHEN Yi-feng(陈艺锋), TANG Chao-bo(唐朝波), HE Jing(何 静) |
626 |
Operation optimization of concentrate burner
in copper flash smelting furnace① |
CHEN Hong-rong(陈红荣), MEI Chi(梅 炽), XIE Kai(谢 锴), LI Xing-fen(李欣锋),ZHOU Jun(周 俊), WANG Xiao-hua(王晓华), G |
631 |
Preparation of high-purity indium by electrorefining① |
ZHOU Zhi-hua(周智华), MO Hong-bing(莫红兵), ZENG Dong-ming(曾冬铭) |
637 |