| MATERIALS SCIENCE AND ENGINEERING |
A model for age strengthening of
plate-like-precipitate-containing Al alloys |
LIU Gang, DING Xiang-dong, SUN Jun, CHEN Kang-hua |
337 |
Numerical simulation of a new powder process named
modified planar flow casting atomization |
XIANG Qing-chun, LI Rong-de, ZHOU Bi-de, TANG Zong-jun, XU Yu-qiao |
348 |
| Plateau effect of CuZnAl memory elements |
TAN Shu-song, PENG Kun, ZENG yu-xiao, TAN Li-xin, GUI Jia-nian, WANG Ren-hui |
356 |
Investigation on bulk rare-earth Nd-Fe-Al
amorphous/nano-crystalline alloy |
SHAO Yuan-zhi, LAN Tu, LIN Guang-ming |
362 |
Friction and wear behavior of multi-walled carbon
nanotube/Cu matrix composites |
WANG Lang-yun, TU Jiang-ping, YANG You-zhi,ZHANG Xiao-bin, CHEN Wei-xiang, LU Huanming |
367 |
Reactive mechanism of Al3Zr(p),
Al2O3(p)/Al composites formed by reaction
between ZrOCl2 and liquid aluminum |
ZHAO Yu-tao, SUN Guo-xiong |
372 |
Preparation of Si-C-O fiber with low resistivity
--Pyrolysis of polymer precursors |
LIU Jun, FENG Chun-xiang, SONG Yong-cai, XIE Hai-tao |
377 |
Thermodynamics analysis of Al2O3,TiB2/Al composites
fabricated by exothermic dispersion method |
ZHU He-guo, WU Shen-qing, WANG Hen-zhi |
382 |
Influence of sintering aids on pressureless
sintering of Sialon ceramics |
WANG Ling-sen, ZHANG Zheng-fu, FAN Yi, YIN Bang-yao |
386 |
Elementary research on CuCr alloy prepared by
SHS-melting technology |
YANG Huan, ZHANG Ｔing-an, NIU Li-ping,WEI Shi-chen, BI Shi-wen, WEI Li |
390 |
Effect of microstructure on high-temperature
oxidation of Cu-Cr-Ni alloys |
CAO Zhong-qiu, NIU Yan, F. Gesmundo |
394 |
| Oxidation stratification of TiAl based alloy |
QU Heng-lei, ZHOU Lian, WEI Hai-rong, ZHAO Yong-qing |
398 |
Surface oxide film characters for Fecralloy alloy
cyclicly oxidized at 1 250 ℃in air |
QIAN Yu-hai, LI Mei-shuan, LIU Guang-ming, ZHANG Ya-ming |
404 |
Iron-based powder metallurgical material reinforced
by SHS TiC composite powders |
ZOU Zheng-guang, FU Zheng-yi, YUAN Run-zhang |
408 |
Flow stress of 7075 aluminum alloy during
hot compressiondeformation |
LIN Gao-yong, ZHANG Hui, GUO Wu-chao, PENG Da-shu |
412 |
| Microstructure and properties of in-situ Zn-Al-Si surface composites prepared by centrifugal casting |
CHEN Wen-zhou, WANG Qu-dong, ZHAI Chun-quan,MA Chun-jiang,ZHU Yan-ping, HE Wei, DING Wen-jiang |
416 |
Microstructure analyses in vacuum diffusion welded
joint of copper and aluminum |
LI Ya-jiang, WU Hui-qiang, CHEN Mao-ai, YANG Min, FENG Tao |
424 |
TEM observation on dealuminification corrosion of
QAl9-2 alloy in marine environment |
HANG Zhong, ZHAO Hui, LIN Hai-chao |
428 |
Purification of commercial aluminum by filtrating
with high-efficient flux for removing inclusions |
FU Gao-sheng, KANG Ji-xing, CHEN Wen-zhe, QIAN Kuang-wu |
433 |
Sliding bearing made of
Zn-27Al-1Cu alloy by spray forming process |
ZHANG Yong-an, XIONG Bai-qing, WEI Qiang, SHI Li-kai |
438 |
Thermodynamics calculation of binder ingredients
for powder injection molding |
LI Song-lin, HUANG Bai-yun, QU Xuan-hui, LI Yi-min |
441 |
Effect of coatings on binding capability
between diamond and matrix |
LIU Xiong-fei, LI Chen-hui |
445 |
Structure of aluminum alloy LY12
implanted with N/Ti by PBII |
LIAO Jia-xuan,XIA Li-fang |
449 |
MoS2 composite films on Ti alloy prepared
by ion-beam-enhanced deposition |
LIU Dao-xin, TANG Bin, CHEN Hua, HE Jia-wen |
454 |
| Effect of added Sn on heat treatment of NdFeB magnets |
ZHANG Zheng-fu, HUANG Bai-yun, LIU Yong,JING An-jin, ZHANG Ming, CHEN Biao |
461 |
Microstructure and properties of carbon reinforced
molybdenum-disilicide composite |
LIU Bo-wei, PAN Jin, FAN Yi, ZHANG Jin-sheng |
466 |
Microstructure and mechanical properties of
20Wf/30ZrCp/W composite |
WANG Yu-jin, ZHOU Yu, SONG Gui-ming, LÜ, De-sheng, LEI Ting-quan |
472 |
Comparison between DV-Xα method and
single-atom theory for calculating electronic structure and physical properties of pure Fe |
PENG Hao, XIE You-qing, WANG Cong-yu, WANG Shan-yin, PENG Kun |
477 |
Application of artificial neural network in
predicting grain size of solidification structure |
ZI Bing-tao, CUI Jian-zhong, BA Qi-xian, YAO Ke-fu |
481 |
Emulation and test research of temperature field and
thermal crown for super-thin high-speed mills roll |
XIONG Yong-gang, MAO Ming-zhi, ZANG Tie-Gang, TAN Jian-ping |
485 |
| MINERAL PROCESSING, METALLURGY AN |
Development of remote expert system based on
Internet/Intranet technology |
JING Guang-jun, LI Songren, LIANG Xue-mei |
489 |
| SO2 anodic reaction kinetics in zinc electrowinning |
SU Yi, JIN Zuo-mei, DAI Zu-yuan |
495 |
Commercial scale test of selective precipitation method
for Mo removal from tungstate solution |
SUN Pei-mei, LI Hong-gui, LI Yun-jiao, SU Peng-tuan, HUO Guang-sheng, ZHAO Zhong-wei, LIU Mao-sheng |
499 |
Thermodynamic analysis on silicon alloy
oxidation refining process |
WANG Xin-guo, DING Wei-zhong, TANG Kai, JIANG Guo-chang, XU Kuang-di |
503 |
Thermodynamic analysis of copper
arsenate preparation process |
CHEN Bai-zhen, TANG Ren-heng, GONG Zhu-qing, QIU Yong-hai |
510 |
| Kinetics of formation reaction of Zn2SiO4 during roasting high silica-containing sphalerite concentrate |
LIU Feng-lin, JIN Zuo-mei, WANG Li-sheng |
514 |
Abnormal influence of salting-out agent on
Au(CN)2- solvent extraction by CTMAB |
HUANG Kun, CHEN Jing, CUI Ning, WU Jinguang, ZHOU Weijing, YAN Wenfei |
518 |
| Dispersion mechanism of ultrafine silica |
HUANG Su-ping, ZHANG Qing-cen |
522 |
