Materials Science and Engineering |
Effect of Sc and Zr on recrystallization behavior of 7075 aluminum alloy |
Jin-feng LENG, Bing-hui REN, Qing-bo ZHOU, Ji-wei ZHAO |
2545 |
Effect of Ga on microstructure and electrochemical performance of Al-0.4Mg-0.05Sn-0.03Hg alloy as anode for Al-air batteries |
Ze-hang ZHUANG, Yan FENG, Chao-qun PENG, Liu-zhong YANG, Meng WANG |
2558 |
Effect of Si content on interfacial reaction and properties between solid steel and liquid aluminum |
Tian-peng Zou, Gao-yang Yu, Shu-hai Chen, Ji-hua Huang, Jian Yang, Zhi-yi Zhao, Ji-ping Rong, Jin Yang |
2570 |
Interface repairing for AA5083/T2 copper explosive composite plate by friction stir processing |
Jian WANG, Xiao-wei WANG, Bo LI, Cheng CHEN, Xiao-feng LU |
2585 |
Effect of compression ratio on microstructure evolution of Mg-10%Al-1%Zn-1%Si alloy prepared by SIMA process |
Li-jie CAO, Guo-rui MA, Chun-xia WANG, Zheng-jian CHEN, Jia-heng ZHANG |
2597 |
Effect of double aging on mechanical properties and microstructure of EV31A alloy |
Kan GU, Xiao-qin ZENG, Bin CHEN, Ying-xin WANG |
2606 |
Effects of annealing on mechanical properties and degradation behavior of biodegradable JDBM magnesium alloy wires |
Yuan TIAN, Hong-wei MIAO, Jia-lin NIU, Hua HUANG, Bin KANG, Hui ZENG, Wen-jiang DING, Guang-yin YUAN |
2615 |
Simulation and experimental study of dynamic recrystallization process during friction stir vibration welding of magnesium alloys |
Mahmoud ABBASI, Behrouz BAGHERI, Farzaneh SHARIFI |
2626 |
Effect of heat treatment on mechanical and wear properties of Zn-40Al-2Cu-2Si alloy |
Temel SAVA?KAN, Zeki AZAKLI, Ali Pa?a HEKìMO?LU |
2651 |
Static globularization and grain morphology evolution of α and β phases during annealing of hot-rolled TC21 titanium alloy |
Ke WANG, Ming-yu WU, Zhao REN, Yu ZHANG, Ren-long XIN, Qing LIU |
2664 |
Vacuum diffusion bonding of Ti2AlNb alloy and TC4 alloy |
Guang-jie FENG, Yan WEI, Bing-xu HU, Yi-feng WANG, De-an DENG, Xiu-xia YANG |
2677 |
Comparison of explosive welding of pure titanium/SUS 304 austenitic stainless steel and pure titanium/SUS 821L1 duplex stainless steel |
Xiang CHEN, Daisuke INAO, Shigeru TANAKA, Xiao-jie LI, I. A. BATAEV, Kazuyuki HOKAMOTO |
2687 |
New insights into microstructural changes during transient liquid phase bonding of GTD-111 superalloy |
Javad ASADI, Seyed Abdolkarim SAJJADI, Hamid OMIDVAR |
2703 |
Microstructure, microhardness and corrosion resistance of laser cladding Ni-WC coating on AlSi5Cu1Mg alloy |
Min ZENG, Hong YAN, Bao-biao YU, Zhi HU |
2716 |
Structural characteristics and high-temperature tribological behaviors of laser cladded NiCoCrAlY-B4C composite coatings on Ti6Al4V alloy |
Wen-chang WANG, Jia-xing LI, Yuan GE, De-jun KONG |
2729 |
Structure, mechanical and thermal properties of Y-doped CrAlN coatings |
Jin-lian TIAN, Chun HU, Li CHEN, Yu-min LOU, Ning-ning ZHAO |
2740 |
Fe-C micro-alloying effect on properties of Zr53Al11.6Ni11.7Cu23.7 bulk metallic glass |
Da-wei DING, JING TAN, An-hui CAI, Yong LIU, Hong WU, Qi AN, Peng-wei LI, Yan ZHANG, Qing YANG |
2750 |
Fracture pattern evolution of SnAgCu-SnPb mixed solder joints at cryogenic temperature |
Ming WU, Shan-lin WANG, Wen-jun SUN, Min HONG, Yu-hua CHEN, Li-ming KE |
2762 |
Smart-microstructures of composites for electrical contacts with frameless packing of Cr and W in copper |
L. E. BODROVA, S. Yu. MELCHAKOV, A. B. SHUBIN, E. Yu. GOYDA |
2773 |
Fatigue analysis of closed-cell aluminium foam using different material models |
M. ULBIN, S. GLODE? |
2787 |
Preparation and properties of porous ceramics from spodumene flotation tailings by low-temperature sintering |
Jie YANG, Long-hua XU, Hou-qin WU, Jiao JIN |
2797 |
Black phosphorous nanosheets-gold nanoparticles-cisplatin for photothermal/photodynamic treatment of oral squamous cell carcinoma |
Jun-jie ZENG, Zhan-gui TANG, Jiao ZOU, Jin-gang YU |
2812 |
Mining, Minerals Processing and Metallurgical Engineering |
Thermo-hydro-mechanical-chemical (THMC) coupling fracture criterion of brittle rock |
Wei YI, Qiu-hua RAO,Zhuo LI, Dong-liang SUN, Qing-qing SHEN |
2823 |
Surface modification of ilmenite and its accompanied gangue minerals by thermal pretreatment: Application in flotation process |
Akbar MEHDILO, Mehdi IRANNAJAD |
2836 |
Cyclic metallurgical process for extracting V and Cr from vanadium slag: Part II. Separation and recovery of Cr from vanadium precipitated solution |
Ming-e YANG, Hao-xiang YANG, Sheng-hui TIAN, Ming-yu WANG, Xue-wen WANG |
2852 |
Composition and structure of arsenic-antimony alloy electrodeposited from acidic chloride solution |
Yan-xiang SHU, Hua-zhen CAO, Hui-bin ZHANG, Sheng-hang XU, Guang-ya HOU, Yi-ping TANG, Guo-qu ZHENG |
2861 |
Numerical simulation of powder effect on solidification in directed energy deposition additive manufacturing |
Xin-xin YAO, Jian-yu LI, Yi-fei WANG, Xiang GAO, Zhao ZHANG |
2871 |