中国有色金属学报(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 31 No. 9 September 2021 |
（1. School of Mechanical and Automotive Engineering, Shanghai University of Engineering Science, Shanghai 201600, China;
2. Medical Device R&D Center, Zhuhai Institute of Advanced Technology Chinese Academy of Sciences, Zhuhai 519000, China;
3. College of Materials Science and Engineering, Guilin University of Technology, Guilin 541004, China;
4. Biomaterials R&D Center, Zhuhai Institute of Advanced Technology Chinese Academy of Sciences, Zhuhai 519000, China;
5. School of Materials Science and Engineering, Harbin Institute of Technology (Shenzhen), Shenzhen 518055, China）
Abstract:A new Mg-10%Al-1%Zn-1%Si alloy with non-dendritic microstructure was prepared by strain induced melt activation (SIMA) process. The effect of compression ratio on the evolution of semisolid microstructure of the experimental alloy was investigated. The results indicate that the average size of α-Mg grains decreases and spheroidizing tendency becomes more obvious with the compression ratios increasing from 0 to 40%. In addition, the eutectic Mg2Si phase in the Mg-10%Al-1%Zn-1%Si alloy transforms completely from the initial fishbone shape to globular shape by SIMA process. With the increasing of compression ratio, the morphology and average size of Mg2Si phases do not change obviously. The morphology modification mechanism of Mg2Si phase in Mg-10%Al-1%Zn- 1%Si alloy by SIMA process was also studied.
Key words: Mg-Al-Zn-Si alloy; compression ratio; microstructure evolution; eutectic Mg2Si phase; strain induced melt activation (SIMA) process
