| Materials Science and Engineering |
| A review of particulate-reinforced aluminum matrix composites fabricated by selective laser melting |
Pei WANG, Jürgen ECKERT, Konda-gokuldoss PRASHANTH, Ming-wei WU, Ivan KABAN, Li-xia XI, Sergio SCUDINO |
2001 |
| Kinetic behaviour of TiB2 particles in Al melt and their effect on grain refinement of aluminium alloys |
Li-li ZHANG, Hong-xiang JIANG, Jie HE, Jiu-zhou ZHAO |
2035 |
| Yield strength prediction of rolled Al-(1.44-12.40)Si-0.7Mg alloy sheets under T4 condition |
Guang-dong WANG, Ni TIAN, Jing-yi CAO, Yi-ran ZHOU, Gang ZHAO, Liang ZUO |
2045 |
| Filiform corrosion behaviour on machined AA7150 aluminium alloy |
Bing LIU, Xiao-rong ZHOU, Xin-xin ZHANG |
2056 |
| Effect of Zn/Mg ratio on cathodic protection of carbon steel using Al-Zn-Mg sacrificial anodes |
Mosaad SADAWY, Saad SAAD,Randa ABDEL-KARIM |
2067 |
| Effect of Sn content on microstructure and tensile properties of as-cast and as-extruded Mg-8Li-3Al-(1,2,3)Sn alloys |
Xiao-yang CHEN, Yang ZHANG, Meng-qi CONG, Ya-lin LU, Xiao-ping LI |
2079 |
| Strain anisotropy models for refined diffraction line profile analysis in cubic metals |
Xiang DAI, Fu-lin JIANG, Jin LIU, Luo-yi WU, Ding-fa FU, Jie TENG, Hui ZHANG |
2090 |
| Incipient melting phase and its dissolution kinetics for a new superalloy |
Xin-xu LI, Chong-lin JIA, Yong ZHANG, Shao-min Lü, Zhou-hua JIANG |
2107 |
| Effect of Sn on synthesis of nanocrystalline Ti-based alloy with fcc structure |
C. AGUILAR, E. PIO, A. MEDINA, C. PARRA, R. MANGALARAJA, P. MARTIN, I. ALFONSO, K. TELLO |
2119 |
| Corrosion and wear properties of micro-arc oxidation treated Ti6Al4V alloy prepared by selective electron beam melting |
Xin YANG, Wan-lin WANG, Wen-jun MA, Yan WANG, Jun-gang YANG, Shi-feng LIU, Hui-ping TANG |
2132 |
| Microstructure and shear strength of γ-TiAl/GH536 joints brazed with Ti-Zr-Cu-Ni-Fe-Co-Mo filler alloy |
Li LI, Wei ZHAO, Zhi-xue FENG,Jia SUN, Xiao-qiang LI |
2143 |
| Electron beam welding of precipitation hardened CuCrZr alloy: Modeling and experimentation |
Rajveer SINGH, Sachin SINGH, P. K. C. KANIGALPULA, J. S. SAINI |
2156 |
| Effects of cross rolling on texture, mechanical properties and anisotropy of pure Mo plates |
De-zhi WANG, Yao-xin JI, Zhuang-zhi WU |
2170 |
| Tribological behaviors of Ag-graphite composites reinforced with spherical graphite |
Yang SUN, Yan WANG, Yun LI, Ke-chao ZHOU, Lei ZHANG |
2177 |
| Preparation and electrochemical performance of nitrogen-doped carbon-coated Bi2Mn4O10 anode materials for lithium-ion batteries |
Jing ZHAN, Chang-fan XU, Yi-yu LONG, Qi-hou LI |
2188 |
| Synthesis and electrochemical performance of V2O5/NaV6O15 nanocomposites as cathode materials for sodium-ion batteries |
Mu-lan QIN, Wan-min LIU, Yuan-jin XIANG, Wei-gang WANG, Bin SHEN |
2200 |
| Preparation and characterization of polyvinylchloride membrane embedded with Cu nanoparticles for electrochemical oxidation in direct methanol fuel cell |
Rohitash KUMAR, Aftab Aslam Parwaz KHAN, Anish KHAN, Abdullah M ASIRI, Yusra HAMID |
2207 |
| Mining, Minerals Processing and Metallurgical Engineering |
| Dynamic tensile strength and failure mechanisms of thermally treated sandstone under dry and water-saturated conditions |
Pin WANG, Tu-bing YIN, Bi-wei HU |
2217 |
| Hydrometallurgical recovery of zinc from industrial hot dipping top ash |
Ewa RUDNIK |
2239 |
| Reductive acid leaching of valuable metals from spent lithium-ion batteries using hydrazine sulfate as reductant |
Jian YANG, Liang-xing JIANG, Fang-yang LIU, Ming JIA, Yan-qing LAI |
2256 |
| Kinetics of carbothermic reduction of marmatite in presence of lime |
Rafael PADILLA, Juan Yamid CARVALLO, María Cristina RUIZ |
2265 |
| Isothermal reduction kinetics of zinc calcine under carbon monoxide |
Yu-jie CHEN, Yun-yan WANG, Ning PENG, Yan-jie LIANG, Bing PENG |
2274 |
| Electrochemical behavior of tantalum in ethylene carbonate and aluminum chloride solvate ionic liquid |
Ai-min LIU, Meng-xia GUO, Zi-yang Lü, Bao-guo ZHANG, Feng-guo LIU, Wen-ju TAO, You-jian YANG, Xian-wei HU, Zhao-wen WANG, Yu-bao LIU, Zhong-ning SHI |
2283 |
