Materials Science and Engineering |
Status and prospect for aluminum industrial development in China |
SHE Xin-wei, JIANG Xian-quan, TAN Xiao-dong, GUO Sheng-feng, TANG Bin-bin, PAN Fu-sheng |
709 |
Effect of Ce-rich rare earth addition on microstructure and electrical conductivity of aluminum alloy |
LI Hong-ying, ZHAO Fei, YANG Shen-lan |
719 |
Effect of A356 alloy covering temperature on microstructure and mechanical properties of Al/low-carbon steel clad plates |
MIAO Peng, LI Yuan-dong, WANG Hui, ZHOU Hong-wei, BI Guang-li |
728 |
Effect of annealing treatment on interfacial microstructure and properties of Ti/Al FSB joint |
ZHANG Zhong-ke, WU Jing-wei, ZHAO Hua-xia |
739 |
Influence of quench delay time on mechanical properties and microstructure of 6061 aluminum alloy |
KOU Lin-yuan, WANG Guan, MA Chao, BIAN Dong-wei |
750 |
Calculation of ductile fracture parameters and forming limit of high-strength aluminum sheet |
CHEN Zhi-wei, ZHAO Chang-cai, DONG Guo-jiang, YANG Zhuo-yun |
763 |
Effect of melt structure transition on crystallization behavior of Al85Ni5Y8Co2 amorphous alloys |
WANG Zhi-zhi, ZHANG Xing-yu, WANG Dong,LIU Lin,JIANG Peng, WU Wang-ping |
775 |
Microstructure and properties of rare earth CeO2-doped graphene composite coatings prepared by MAO on AA7050 |
ZONG Yu, SONG Ren-guo, HUA Tian-shun, CAI Si-wei |
782 |
Effects of Gd on microstructures and mechanical properties of as-cast Mg-8Li-4Zn-xGd alloys |
XU Chun-jie, XU Xin-feng, MA Tao, MENG Ling-nan, ZHANG Zhong-ming, SHECHTMAN Dan |
793 |
Preparation and properties of Al2O3 dispersion-strengthened copper-tin oil bearings |
YAN Zhi-qiao, CHEN Feng, XU Rong-jun, WANG Tao, WU Xiang-tao, ZHOU Zhong |
801 |
Structure and properties of Ti-Ta alloys with different crystal phases studied by DFT calculations |
SHAO Xiao-mei, WANG Lu-yao, ZHANG Jun-min, WEN Ming, ZHAO Zong-yan |
809 |
Laser nitriding behavior of Ti-6Al-4V with different gas sources |
LI Wen-sheng, ZHANG Wen-bin, WU Yan-rong, LIANG Gang, GAO Feng-qin, SHI Yu, YU Wei-yuan, YAO Xiao-chun |
817 |
Ti2AlC/TiAl-based laminated composite sheets strengthened by titanium alloy layers with through-holes |
NIU Qun-fei, AI Tao-tao, LIU Jie, DENG Zhi-feng, FENG Xiao-ming, LI Wen-hu, YUAN Xin-qiang, BAO Wei-wei, DONG Hong-feng |
829 |
Relationship of pad material parameters and brake disc temperature field |
GAO Fei, WU Bo-wen, YANG Jun-ying |
837 |
Mine Engineering, Metallurgical Engineering, Chemistry and Chemical Engineering |
Technical idea of stabilizing arsenic via hydrothermal reduction and mineralization based on geochemistry |
HU Bin, YANG Tian-zu, LIU Wei-feng, ZHANG Du-chao, CHEN Lin |
847 |
Mechanical activation on extraction of vanadium from vanadium slag by calcification roasting-acid leaching process |
HUANG Qing-yun, XIANG Jun-yi, PEI Gui-shang, WANG Xin, Lü Xue-wei |
858 |
Effects of anode conductive materials on electrolytic iron of Fe-W-Sn alloy powder |
FAN Ke-biao, ZHENG Ya-jie, HE Han-bing |
866 |
A new process based on gas bubble supported organic liquid membrane extraction for treatment of auro-cyanide wastewater |
LIU Jie, WU Xiao-hong, HUANG Kun, XU Zhong-min, YU Feng-shan, LIU Hui-zhou |
875 |
Effect of calcium oxide on carbothermal reduction of nickel slag |
LI Xiao-ming, ZHANG Xin-yi, LI Yi, XING Xiang-dong |
887 |
Effect of supersaturation on morphology and stability of atmospheric pressure scorodite under As(Ⅴ)-Fe(Ⅱ) system |
WANG Chang-yin, LI Min-ting, WEI Chang, LI Xing-bin, DENG Zhi-gan, LI Hui-yang, LEI Fu-guang |
896 |
Preparation of MoC by reducing MoO3 with CO gas |
SONG Cheng-min, ZHANG Guo-hua, ZHOU Guo-zhi |
906 |
Thermodynamic of V(Ⅴ)-Fe(Ⅲ)-S(Ⅵ)-H2O system and its utilization for separating vanadium over ferric from acidic solution |
LIU Jing-wen, YANG Zheng-fei, ZHOU Peng, LI Fei |
912 |
Hydrolysis behavior of AlN in aluminum dross and its multivariate nonlinear regression analysis |
Lü Shuai-shuai, NI Wei, NI Hong-jun, ZHU Yang-yang |
920 |
Flotation theory and research progress of metal ion coordination regulation molecule assembly |
SUN Wen-juan, HAN Hai-sheng, HU Yue-hua, SUN Wei, ZHU Yang-ge, GUI Xia-hui, CAO Xue-feng, XING Yao-wen, LI Cheng-bi, WEI Zhao |
927 |
Sulfidation sintering-flotation process of copper-nickel-bearing electroplating sludge |
Lü Hao-zi, HE Zhuang-zhi, CHEN Zhi-qiang, LIU Yong, LIU Mu-dan, LI Bo |
942 |
Experiment of shear thixotropy of cemented tailings filling slurry and its prediction model based on dimensional analysis |
ZHANG You-zhi, GAN De-qing, CHEN Xun, XUE Zhen-lin, REN Wei-cheng |
951 |