Materials Science and Engineering |
Precipitation kinetics of GP zones, metastable η′ phase and equilibrium η phase in Al-5.46wt.%Zn-1.67wt.%Mg alloy |
A. KHALFALLAH, A. A. RAHO, S. AMZERT, A. DJEMLI |
233 |
Thermal stability of nanocrystalline Al-10Fe-5Cr bulk alloy |
Muneer BAIG, Hany R. AMMAR, Asiful H. SEIKH, Jabair A. MOHAMMED, Fahad AL-MUFADI, Abdulaziz ALABOODI |
242 |
Influence of high pressure and manganese addition on Fe-rich phases and mechanical properties of hypereutectic Al-Si alloy with rheo-squeeze casting |
Chong LIN, Shu-sen WU, Shu-lin Lü, He-bao WU, Han-xin CHEN |
253 |
Effect of large strain cross rolling on microstructure and properties of Al-Li alloy plates with high magnesium content |
Cai-he FAN, Dong-sheng ZHENG, Xi-hong CHEN, Jian-jun YANG, Yong LIU, Hui-zhong LI |
263 |
Effect of prestressed ultrasonic peen forming parameters on bending curvature and spherical deformation of plate |
Tao ZHANG, Lei LI, Shi-hong LU, Jia-bin ZHANG, Zhen ZHOU, Hai GONG |
270 |
Deformation inhomogeneity due to sample-anvil friction in cylindrical compression test |
Xian-jue YE, Xiao-juan GONG, Biao-biao YANG, Yun-ping LI, Yan NIE |
279 |
Effect of welding sequence on residual stress and deformation of 6061-T6 aluminium alloy automobile component |
Jie YI, Jian-ming ZHANG, Shu-fen CAO, Peng-cheng GUO |
287 |
Strain-induced α-to-β phase transformation during hot compression in Ti-5Al-5Mo-5V-1Cr-1Fe alloy |
Kai LI, Ping YANG |
296 |
Sensitivity analysis on globularized fraction of α lamellae in titanium alloys |
Jiao LUO, Bo-zhe WANG, Lin-feng WANG, Lian LI, Miao-quan LI |
305 |
Microstructural evolution and creep deformation behavior of novel Ti-22Al-25Nb-1Mo-1V-1Zr-0.2Si (at.%) orthorhombic alloy |
Yong-sheng HE, Rui HU, Wen-zhong LUO, Tao HE, Yun-jin LAI, Yu-jun DU, Xiang-hong LIU |
313 |
Influence of niobium and molybdenum addition on microstructure and wear behavior of laser-borided layers produced on Nimonic 80A-alloy |
N. MAKUCH, P. DZIARSKI, M. KULKA, A. PIASECKI, M. TULI?SKI, R. MAJCHROWSKI |
322 |
Numerical simulation of dendrite growth in Ni-based superalloy casting during directional solidification process |
Xue-wei YAN,Xiong GUO, Yan-ling LIU, Xiu-fang GONG, Qing-yan XU, Bai-cheng LIU |
338 |
Self-organized layered growth phenomena of diffusion couples with spinodal decomposition in binary alloys |
Yong LU, Yuan-yuan CUI, Qiao-qiao TANG, Cui-ping WANG, Zhen-bang WEI, Shui-yuan YANG, Xing-jun LIU |
349 |
Non-isothermal nano-crystallization kinetics in amorphous Ni55Nb35Si10 alloy |
H. MINOUEI, G. H. AKBARI, M. H. ENAYATI, S. I. HONG |
358 |
Production of Ag-ZnO powders by hot mechanochemical processing |
D. GUZMáN, C. AGUILAR, P. ROJAS, J. M. CRIADO, M. J. DIáNEZ, R. ESPINOZA, A. GUZMáN, C. MARTíNEZ |
365 |
Characterization of spherical AlSi10Mg powder produced by double-nozzle gas atomization using different parameters |
Chao-feng GAO, Zhi-yu XIAO, Hai-ping ZOU, Zhong-qiang LIU, Jin CHEN, Shang-kui LI, Da-tong ZHANG |
374 |
Mining, Minerals Processing and Metallurgical Engineering |
Effect of thermal treatment on energy dissipation of granite under cyclic impact loading |
Rong-hua SHU, Tu-bing YIN, Xi-bing LI, Zhi-qiang YIN, Li-zhong TANG |
385 |
Removal and recovery of titanium (IV) from leach liquor of high-sulfur bauxite using calcium alginate microspheres impregnated with di-(2-ethylhexyl) phosphoric acid |
Zhen-ning LOU, Xin XIAO, Ying XIONG, Yu-chun ZHAI |
397 |
Kinetics of leaching lithium from α-spodumene in enhanced acid treatment using HF/H2SO4 as medium |
Hui GUO, Hai-zhao YU, An-an ZHOU, Meng-hua Lü, Qiao WANG, Ge KUANG, Hai-dong WANG |
407 |
Efficient separation of alumina and silica in reduction-roasted kaolin by alkali leaching |
Xiao-bin LI, Hong-yang WANG, Qiu-sheng ZHOU, Tian-gui QI, Gui-hua LIU, Zhi-hong PENG, Yi-lin WANG |
416 |
Corrosion behavior of electrodeposited Ni with normal and bimodal grain size distribution |
Feng YANG, Xiao-feng ZHANG, Hong YANG, Yi-nong LIU, Shi-jie HAO, Li-shan CUI |
424 |