Structural Materials |
Microstructure and mechanical properties of two-phase Mg-10.73Li-4.49Al-0.52Y alloy processed by ECAP |
KONG Jing, LIU Qin, KANG Zhi-xin |
2415 |
Effects of texture and grain size on press formability of AZ31 magnesium alloy sheets |
HU Shui-ping, WANG Zhe |
2424 |
Effects of Zn content on microstructure, mechanical properties and damping capacities of Mg-10Gd-6Y-xZn-0.6Zr alloys |
SONG Peng-fei, WANG Jing-feng, ZHOU Xiao-en, LIANG Hao, PAN Fu-sheng |
2430 |
Effect of Gd content on microstructures and mechanical properties of Al-Zn-Mg-Cu-Zr alloys |
MEI Fei-qiang, WANG Shao-hua, FANG Can-feng, MENG Lin-gang, JIA Fei, HAO Hai, ZHANG Xing-guo |
2439 |
Agglomerating behavior of primary solid particles in magnesium alloy semisolid slurry during electromagnetic stirring |
ZHANG Xiao-li, LING Xiang-jun, LI Ting-ju, XIE Shui-sheng, JIN Yun-xue |
2448 |
Optimum retrogression and reaging treatment of pre-stretched 7A55 aluminum alloy plate |
LIAO Zhong-quan, LUO Xian-fu, ZHENG Zi-qiao, CAI Biao, ZHONG Shen |
2454 |
Growth kinetics of intermetallic compounds at aluminum/stainless steel interface bonded by rolling |
ZHOU De-jin, YIN Lin, ZHANG Xin-ming, TANG Jian-guo, LIU Xing-xing |
2461 |
Corrosion behavior of continuous columnar-grained Cu-12%Al alloy in 3.5%NaCl and 10%HCl solutions |
HUANG Hai-you, NIE Ming-jun, LUAN Yan-yan, XIE Jian-xin |
2469 |
Effects of Zn additions and aging process on microstructure and mechanical properties of 2056 aluminum alloy |
LUO Xian-fu, ZHENG Zi-qiao, GE Jing-xuan, ZHANG Hai-feng, ZHONG Jing, LIAO Zhong-quan |
2477 |
Effect of trace Sn(In) addition on ageing behaviour and microstructure evolution of Al-3.5%Cu alloy |
SHU Jun, CHEN Zhi-guo, LI Shi-chen, ZHANG Ji-shuai, REN Jie-ke |
2486 |
Texture weakening of AZ31 Mg alloy sheet under bidirectional cyclic bending at low temperature and subsequent annealing |
HUO Qing-huan, YANG Xu-yue, MA Ji-jun, SUN Huan, WANG Jun, GUO Jun-cheng, QIN Jia |
2492 |
Copper cladding aluminum composite materials with rectangle section fabricated by horizontal core-filling continuous casting |
WU Yong-fu, LIU Xin-hua, XIE Jian-xin, WANG Lian-zhong, DONG Xiao-wen |
2500 |
Phase transition and high-temperature oxidation dynamics of new-type nickel-based corrosion resistance alloy |
ZHANG Yu-bi, WEI Han-dong, WANG Dong-zhe, WANG Jin-tai, LI Chang-rong |
2508 |
Effect of bonding temperature on interfacial microstructure and properties of GH4169 alloy TLP joints |
SONG Xiao-guo, CAO Jian, FENG Ji-cai, DOU Dong-bai, JIN Gui-dong |
2516 |
Elastic stability of face-centered cubic Fe-Cu random solid solution alloys based on special quasirandom structure model |
WEN Yu-feng, SUN Jian, HUANG Jian |
2522 |
Evolution of microstructure, texture and mechanical properties of BFe10-1-1 tube with microstructure along axial orientation during cold-rolling |
MEI Jun, LIU Xin-hua, JIANG Yan-bin, XIE Jian-xin |
2529 |
Effects of proportion of graphite and MoS2 on performances of space docking friction material |
XIAO Ye-long, YAO Ping-ping, GONG Tai-min, ZHAO Lin, TAN Hui-qiang, JIN Zong-xiang |
2539 |
Microstructure and mechanical properties of C89320 lead-free bismuth tin bronze |
DONG Xiu-wen, LI Yan |
2546 |
Functional Materials |
Effect of W content on hot deformation behavior of W-Cu composite at elevated temperature |
LIU Yong, SUN Yong-wei, TIAN Bao-hong, ZHAO Rui-long, ZHANG Yi |
2553 |
Phase destabilization and concomitant grain growth in nanocrystalline SmCo7 alloy |
ZHANG Zhe-xu, SONG Xiao-yan, LI Ding-peng, LIU Xue-mei |
2559 |
Synthesis of hierarchical porous ceria templated from bamboo leaves and their catalytic performance |
WANG Wei, CHEN Zhi-gang,CHEN Feng, WANG Tai-bin |
2565 |
Properties of aluminum foams with electrodeposited Ni coatings |
LIU Huan, YAO Guang-chun, CAO Zhuo-kun, HUA Zhong-sheng, SHI Jian-chao |
2572 |
Research progress of high aluminum-silicon alloys in electronic packaging |
XIE Li-chuan, PENG Chao-qun, WANG Ri-chu, WANG Xiao-feng, CAI Zhi-yong, LIU Bing |
2578 |
Synthesis of spherical LiFePO4/C cathode material with high tap density by oxygen-precipitation method |
WANG Wen-qin, GUO Zhi-meng, JIANG Bing, YE Qing, CHEN Wen |
2588 |
Magnetic and electrocatalytic properties of multi-walled carbon nanotube/Fe3O4 composites |
HOU Cui-ling, LI Tie-hu, ZHAO Ting-kai, ZHANG Wei, LIU Le-hao, ZHANG Wen-juan |
2594 |
Microstructure and wear resistance of laser cladding WC particles reinforced composite coatings |
LIU Jian-di, ZHANG Shu-quan, WANG Hua-ming |
2600 |
Microstructure of friction stir welding lap joint between pure copper and stainless steel |
HE Di-qiu, XU Shao-hua, PENG Jian-hong, WANG Jian, HE Shu-jun |
2608 |
Preparation of C-MSnO3 (M = Ca, Sr, Ba) nanocomposites and its electrochemistry performances |
HU Jing, LU Zhou-guang, TANG You-gen, HUANG Yuan-ti |
2614 |
Mine |
Effects of Cr, V and RE additives on microstructures and properties of super extra coarse and extra coarse cemented carbides |
ZHANG Li, CHENG Xin, CHEN Shu, MA Yun, WU Hou-ping, XIONG Xiang-jun |
2620 |
Effect of vacancy defects on oxygen molecule adsorption on galena surface (100) |
LAN Li-hong, CHEN Jian-hua, LI Yu-qiong, CHEN Ye, GUO Jin |
2626 |
Thermodynamic study on decomposition of scheelite with sodium silicate |
CAO Cai-fang, ZHAO Zhong-wei, LIU Xu-heng, WANG Xiao-bo |
2636 |
Production of synthetic rutile from high Ca and Mg type titanium slag by mineral phase reconstruction process |
DONG Hai-gang, GUO Yu-feng, JIANG Tao, CHEN Jia-lin, FAN Xing-xiang |
2642 |
Deposition-dissolution properties of magnesium in imidazolium-based ionic liquids |
NASIMAN Tuerxun, NULI Yan-na, ZHAO Qing-song, YANG Jun, WANG Jiu-lin |
2648 |
Equilibrium concentration of calcium hydroxide in aCl2-Ca(OH)2-H2O system |
LIU Wei-ping, XU Hui, SHI Xi-chang, YANG Xi-yun, CHEN Ya, CHENG Jun-feng, LI Gui |
2656 |
Reductive leaching of manganese from manganese anode slag |
NIU Sha-sha, WANG Zhi-xing, GUO Hua-jun, LI Xin-hai, PENG Wen-jie, HU Qi-yang, ZHANG Yun-he |
2662 |
Sorption characteristics of Pb(Ⅱ) from aqueous solution by extracellular polymeric substance (EPS-07) of lead-resistant and producing flocculant strain Klebsiella pneumonia |
XIN Xin, YAO Li, CUI Ke, YE Zhi-xiang, YANG Yi-jin, YU Jing |
2667 |
Thermodynamic analysis of deep purification in manganiferous wastewater |
ZHOU Zhao-an, GAN Hong-xiang, LI Jia-yuan, YANG Tian-zu, CHU Guang |
2676 |
Constant current electrodeposition of aluminum from [EMIM] Br-AlCl3 ionic liquid |
ZHAO Hai, XU Lian-bin, CHEN Jian-feng, ZHANG Peng-yuan |
2682 |
Separating and enriching zinc from metallurgical dust at low temperature |
GAO Jin-tao, LI Shi-qi, ZHANG Yan-ling, ZHANG Yan-ting, CHEN Pei-yu, QIAN Gang |
2692 |
Transient multi-field coupled simulation and parameters optimization of cylindrical regenerative aluminum melting furnace |
ZHOU Ping, CHEN Zhuo, WANG Xiao-song, TAN Yi-jun, YAN Hong-jie |
2699 |