Transactions of Nonferrous Metals Society of China The Chinese Journal of Nonferrous Metals

您目前所在的位置:首页 - 期刊目录

中国有色金属学报

The Chinese Journal of Nonferrous Metals

第17卷    第7期    2007年7月


快速凝固镁合金开发原理及研究进展 余 琨,黎文献,王日初,冯 艳,吴志文 1025
Al-Cu-Mg合金的断裂韧性与拉伸延性模拟 宋 旼,袁铁锤,张福勤,黄伯云,陈康华 1034
AZ91D镁合金高温压缩过程中的微观组织演变 李淑波1,邹志文1,吴 昆2,郑明毅2,熊守美1 1041
振动和合金化对消失模铸造AZ91D组织与
性能的影响
李继强,樊自田,王元庆,董选普 1047
AZ31镁合金表面液相渗铝的工艺与性能 谭成文1, 2,郭冠伟2,王潇屹2,王富耻2,才鸿年1, 2 1053
双级时效处理对喷射沉积Al-Zn-Mg-Cu合金
微观组织和力学性能的影响
王 锋,熊柏青,张永安,朱宝宏,刘红伟,何小青 1058
扩容角对初始随机材料缺陷岩石试样破坏过程及
力学行为的影响
王学滨 1063
碳热还原合成Ti(C,N)晶须的相转变行为及生长机理 曹顺华,蔡志勇,谢 湛,邹仕民,李春香 1072
热浸镀铝层中的非晶态金属相 张 伟1, 2,范志康1,文九巴3,张智强4,郭献军2 1077
Sn-9Zn钎料与内加Cu质点和Cu基体界面生长行为 卫国强1,况 敏2,杨永强1,赵 利2 1083
块体非晶合金Cu58Zr20Ti20Mo2的形成与力学性能 杨元政,董振江,仇在宏,陈小祝,谢致薇,白晓军 1090
CVI炭/炭复合材料微观结构和生长模型 谢志勇1,黄启忠1,梁逸曾2,黄伯云1 1096
定向凝固Al-4.5%Cu合金枝晶组织与抽拉速率的关系 吴 强,司乃潮,郭 毅,李达云 1101
2A12铝合金形变热处理工艺在旋压工艺中的应用 刘黎明,陶 华 1107
时效态Cu-Cr-Zr-Mg-RE合金的组织与性能 慕思国1, 2,曹兴民2,汤玉琼2,向朝建2,杨春秀2,
郭富安2,唐谟堂1
1112
微观组织对TA15 ELI钛合金损伤容限性能的影响 李士凯,惠松骁,叶文君,于 洋,熊柏青 1119
时效处理对金属铍剩余电阻比的影响 张青来1, A. B. Bondarev2, V. A. Andreev2, 王粒粒1, 胡永学1 1124
润滑剂含量不同时W-Ni-Fe合金的温压行为 彭元东,易健宏,刘 宁,叶途明,李丽娅,罗述东,冉俊铭 1129
预制体制备方式对PCM法泡沫铝发泡行为的影响 王录才1, 2,曾松岩2,王 芳1,游晓红1 1135
真空钎焊金刚石界面碳化物的形貌 卢金斌1, 2,徐九华2 1143
热变形Ti-15-3合金再结晶晶粒的分形分析 张 青,李 萍,薛克敏 1149
非晶55Mg35Ni10Si块体的制备及力学性能 孙 蔚 1155
LaNi4.5Al0.5储氢合金固溶相的密度泛函研究 陈 东1,周理海1,余本海1,王春雷1,高 涛2,张东玲1 1160
高硅铝合金粉末的高温空气氧化预处理工艺 杨伏良,易丹青,刘 泓,张 伟 1166
M型钡铁氧体纳米粉体的溶胶−凝胶制备与结晶特性 孙 昌1, 2,孙康宁1 1172
电场作用对提高微生物浸矿性能的影响 左 恒,吴爱祥,王贻明 1177
基于图像处理及模式聚类的二次仿真方法及其在
回转窑温度监控中的应用
李 劼,张红亮,陈湘涛,刘代飞,邹 忠 1182
铬盐清洁生产工艺中铝硅的脱除 王少娜1, 2,郑诗礼1,张 懿1 1188
碳热氯化法回收重选尾矿中的稀土 曾繁武1,于秀兰1,刘 嘉1,张纪谦2,张 鉴3,王之昌1 1195
基于核偏最小二乘法的动态预测模型在
铜转炉吹炼中的应用
宋海鹰,桂卫华,阳春华,彭小奇 1201
高炉尘泥化学除锌 黄志华, 伍喜庆, 彭冠兰 1207
水滑石前驱法制备的Al-Li复合阳极氧化膜的性能 叶 皓,赵旭辉,左 禹,熊金平,赵景茂 1213

The Chinese Journal of Nonferrous Metals

中国有色金属学报

Vol. 17    No. 7    July 2007


Research theory and development of rapidly solidified magnesium alloy YU Kun, LI Wen-xian, WANG Ri-chu, FENG Yan, WU Zhi-wen 1025
Modeling on fracture toughness and tensile
ductility of Al-Cu-Mg alloy
SONG Min, YUAN Tie-chui, ZHANG Fu-qin, HUANG Bai-yun, CHEN Kang-hua 1034
Microstructure evolution of AZ91D magnesium alloy
during high temperature compression
LI Shu-bo, ZOU Zhi-wen, WU Kun, ZHENG Ming-yi, XIONG Shou-mei 1041
Effects of vibration and alloying on microstructure
and properties of AZ91D magnesium alloy
via lost foam casting
LI Ji-qiang, FAN Zi-tian, WANG Yuan-qing, DONG Xuan-pu 1047
Processes and properties of liquid aluminized
coating on AZ31 magnesium alloy
TAN Cheng-wen,, GUO Guan-wei, WANG Xiao-yi,WANG Fu-chi, CAI Hong-nian, 1053
Effect of two-step aging treatment on microstructure and
mechanical properties of spray-deposited
Al-10.8Zn-2.8Mg-1.9Cu alloy
WANG Feng, XIONG Bai-qing, ZHANG Yong-an,ZHU Bao-hong, LIU Hong-wei, HE Xiao-qing 1058
Effects of dilation angle on failure process and mechanical
behavior for rock specimen with random material
imperfections
WANG Xue-bin 1063
Phase transformation behavior and growth mechanism of Ti(C, N)
whiskers synthesized through carbothermal reduction process
CAO Shun-hua, CAI Zhi-yong, XIE Zhan, ZOU Shi-min, LI Chun-xiang 1072
Amorphous phase in hot dip aluminized
layer of steel
ZHANG Wei,, FAN Zhi-kang, WEN Jiu-ba,ZHANG Zhi-qiang, GUO Xian-jun 1077
Interfacial growth behavior of Sn-9Zn/additive Cu-particles
and Sn-9Zn/Cu-substrate
WEI Guo-qiang, KUANG Min, YANG Yong-qiang, ZHAO Li 1083
Formation and mechanical properties of Cu58Zr20Ti20Mo2
bulk metallic glass
YANG Yuan-zheng, DONG Zheng-jiang, QIU Zai-hong,CHEN Xiao-zhu, XIE Zhi-wei, BAI Xiao-jun 1090
Microstructure and growth model of C/C composites by
chemical vapor infiltration
XIE Zhi-yong, HUANG Qi-zhong, LIANG Yi-zeng, HUANG Bai-yun 1096
Relationship between primary dendrite arm spacing of Al-4.5%Cu
alloy and withdrawal rate during unidirectional solidification
WU Qiang, SI Nai-chao, GUO Yi, LI Da-yun 1101
Application of thermo-mechanical treatment process on 2A12
aluminum alloy in craft of rotary extrusion
LIU Li-ming, TAO Hua 1107
Microstructure and properties of aging Cu-Cr-Zr-Mg-RE alloy MU Si-guo,, CAO Xing-min, TANG Yu-qiong, XIANG Chao-jian,YANG Chun-xiu, GUO Fu-an,TANG Mo-tang 1112
Effects of microstructure on damage tolerance
properties of ta15 eli titanium alloy
LI Shi-kai, HUI Song-xiao, YE Wen-jun, YU Yang, XIONG Bai-qing 1119
Effect of aging treatment on residual resistance ration of beryllium ZHANG Qing-lai, A.B.Bondarev, V.A.Andreev,WANG Li-li, HU Yong-xue 1124
Warm compacting behavior of W-Ni-Fe alloy with
different lubricant contents
PENG Yuan-dong, YI Jian-hong, LIU Ning, YE Tu-ming, LI Li-ya,LUO Shu-dong, RAN Jun-ming 1129
Effects of PCM methods on foaming behavior of Al-TiH2 precursor WANG Lu-cai,, ZENG Song-yan, WANG Fang, YOU Xiao-hong 1135
Morphology of carbide on diamond interface by vacuum brazing LU Jin-bin,, XU Jiu-hua 1143
Fractal analysis of recrystallized grains of
Ti-15-3 alloy after hot deformation
ZHANG Qing, LI Ping, XUE Ke-min 1149
Fabrication and mechanical properties of bulk amorphous
55Mg35Ni10Si alloy
SUN Wei 1155
Density functional theory study on solid solution
phase of LaNi4.5Al0.5 hydrogen storage alloys
CHEN Dong, ZHOU Li-hai, YU Ben-hai, WANG Chun-lei, GAO Tao, ZHANG Dong-ling 1160
Pretreatment technology of high-silicon aluminum alloy powder in high
temperature atmosphere oxidation
YANG Fu-liang, YI Dan-qing, LIU Hong, ZHANG Wei 1166
Preparation and crystalline properties of M-type
barium ferrite nanopowder by sol-gel process
SUN Chang,, SUN Kang-ning, 1172
Effect of electric field on improving leaching ability of microbe ZUO Heng, WU Ai-xiang, WANG Yi-ming 1177
Secondary simulation based on pattern cluster and
image process and application in rotary kiln
temperature inspection
LI Jie, ZHANG Hong-liang, CHEN Xiang-tao, LIU Dai-fei, ZOU Zhong 1182
Separation of aluminum and silicon in clean
production process for potassium dichromate
WANG Shao-na,, ZHENG Shi-li , ZHANG Yi 1188
Recovery of rare earth from gravity concentrated tailings
by carbochlorination
ZENG Fan-wu, YU Xiu-lan, LIU Jia, ZHANG Ji-qian,ZHANG Jian, WANG Zhi-chang 1195
Application of dynamical prediction model based on kernel partial
least squares for copper converting
SONG Hai-ying, GUI Wei-hua, YANG Chun-hua, PENG Xiao-qi 1201
Removal of zinc from blast furnace dust by chemical leaching HUANG Zhi-hua, WU Xi-qing, PENG Guan-lan 1207
Properties of Al-Li anodic films by hydrotalcite precursor method YE Hao, ZHAO Xu-hui, ZUO Yu, XIONG Jin-ping, ZHAO Jing-mao 1213

ISSN 1004-0609
CN 43-1238/TG
CODEN: ZYJXFK

ISSN 1003-6326
CN 43-1239/TG
CODEN: TNMCEW

主管:中国科学技术协会 主办:中国有色金属学会 承办:中南大学
湘ICP备09001153号 版权所有:《中国有色金属学报》编辑部
------------------------------------------------------------------------------------------
地 址:湖南省长沙市岳麓山中南大学内 邮编:410083
电 话:0731-88876765,88877197,88830410   传真:0731-88877197   电子邮箱:f_ysxb@163.com