微观组织对TA15 ELI钛合金损伤容限性能的影响|李士凯,惠松骁,叶文君,于洋,熊柏青-《中国有色金属学报》官方网站|全网首发|论文开放获取

您目前所在的位置：首页 - 期刊简介 - 详细页面

中国有色金属学报

ZHONGGUO YOUSEJINSHU XUEBAO

第17卷第7期总第100期 2007年7月

[PDF全文下载]

文章编号：1004-0609(2007)07-1119-05

微观组织对TA15 ELI钛合金损伤容限性能的影响

李士凯，惠松骁，叶文君，于洋，熊柏青

(北京有色金属研究总院有色金属材料制备加工国家重点实验室，
北京 100088)

摘要:

研究了TA15 ELI 钛合金43 mm厚板的等轴组织、双态组织和片层组织的室温拉伸性能、断裂韧性(K_IC)以及疲劳裂纹扩展速率(da/dN)等损伤容限性能，通过金相显微镜观测了疲劳裂纹在各类组织中的扩展规律，讨论显微组织对该合金损伤容限性能的影响。结果表明：该合金等轴组织和双态组织的室温力学性能和疲劳裂纹扩展阻抗差别不大；相对等轴组织和双态组织而言，该合金片层组织在损失强度较小的前提下(R_m=992 MPa)，合金断裂韧性提高，达到111 MPa∙m^1/2，同时该合金的疲劳裂纹扩展速率也大幅降低，其Paris公式拟合参数为：c=1.08×10⁻⁸，n=3.23，具有更好的损伤容限性能。

关键字: TA15 ELI钛合金；疲劳裂纹；扩展速率；断裂韧性；损伤容限

Effects of microstructure on damage tolerance
properties of ta15 eli titanium alloy

LI Shi-kai, HUI Song-xiao, YE Wen-jun, YU Yang, XIONG Bai-qing

（State Key Laboratory for Fabrication and Processing of Non-ferrous Metals,
General Research Institute for Non-ferrous Metals, Beijing 100088, China）

Abstract:The damage tolerance behavior of TA15 ELI alloy 43 mm plates with equiaxed, bi-model and lamellae microstructure were studied, including tensile properties, fracture toughness and fatigue crack propagation behavior. The effects of microstructure of TA15 ELI alloy on the damage tolerance were discussed. The results show that the equiaxed and bi-modal microstructures have the similar mechanical properties and fatigue crack propagation rate. The plate with lamellae microstructure has higher fracture toughness about 111 MPa∙m1/2 and fatigue crack propagation resistance, and its strength lose is less compared with that of bi-modal microstructure, which indicates that the lamellar microstructure has better damage tolerance behavior.

Key words: TA15 ELI titanium alloy; fatigue crack propagation rate; fracture toughness; damage tolerance

ISSN 1004-0609
CN 43-1238/TG
CODEN: ZYJXFK

ISSN 1003-6326
CN 43-1239/TG
CODEN: TNMCEW