Research process and new technology of magnesium alloy in Japan |
JI Ze-sheng |
1977 |
Structure and properties of Ti-B-N coatings prepared by radio-frequency plasma- enhanced chemical vapor depostion |
MA Sheng-li, MA Qing-song, NIU Xin-ping, XU Ke-wei,P Karvankova, S Veprek |
1985 |
Effect of pre-deformation on microstructures and mechanical properties of 2519 aluminum alloy |
LI Hui-zhong,ZHANG Xin-ming,CHEN Ming-an,ZHOU Zhuo-ping,GONG Min-ru |
1990 |
Physical simulation of rheological behavior and stress-strain relation evolvement in continuous roll-casting process |
ZHAN Li-hua, ZHONG Jue, LI Xiao-qian, HUANG Ming-hui |
1995 |
Effect of Al3Ti3B master alloy on microstructure and mechanical properties of AZ91D magnesium alloy |
GONG Li-qin, LI Jian-guo, ZHOU Peng, WANG Fa-qi,TONG Zhong-sheng, TAO Zhan-dong |
2003 |
Synthesis of (Ca, Mg) α′-Sialon-AlN-TiN powders from titanium-bearing blast furnace slag |
JIANG Tao, XUE Xiang-xin |
2009 |
Microstructure and characterization of surface nanocrystallization of aluminum alloy |
HU Lan-qing, LI Mao-lin, WANG Ke, LUI Gang,WEI Ying-hui,XU Bin-she |
2016 |
Thermal decomposition properties of titanium hydride and Al alloy foam with low porosity and small pore diameter |
YANG Dong-hui, HE De-ping |
2021 |
Improvement of two-parameter twin shear unified failure criterion with parabolic failure envelope and its application in elasto-plastic analysis on wall rock around tunnel |
HU Xiao-rong |
2029 |
Properties of recycling tungsten heavy alloy |
GAO Hai-yan, WANG Xin-ping, HE Yue-hui, REN Bin,CHEN Li-bao, HUANG Bai-yun |
2035 |
Characteristics of X-ray absorption on nanoscale thin films |
TANG Yuan-hong,LIN Liang-wu,ZHU Li-bing |
2043 |
Effects of parameters of slurry-making process with rotating duct on semi-solid microstructure of A356 alloy |
GUO Hong-min, YANG Xiang-jie, HU Bin |
2049 |
Microstructure and single crystal's thermoelectric performance of B-doped CoSi |
ZHOU Yang, LI Cheng-chuan, REN Wei-li,ZHANG Lan-ting, WU Jian-sheng |
2055 |
Effect of electromagnetic field on surface quality, macrostructure and property of horizontal continuous casting of copper hollow billet |
LI Xin-tao,LI Qiu-lin,LI Ting-ju,SONG Yan-qin,ZHANG Jin-li,JIN Jun-ze |
2060 |
Microstructure and properties of 2197 Al-Li alloy |
HUANG Lan-ping, ZHENG Zi-qiao, HUANG Yong-ping |
2066 |
Numerical simulation and experimental research of heat transfer coefficient in electromagnetic continuous casting of hollow billets |
ZHANG Qi, LI Qiu-lin, LI Ting-ju, ZHENG Xian-shu, JIN Jun-ze |
2073 |
Preparation of Al2O3sf·SiCp/Al composites by infiltration-semi-solid densification under pressure |
DU Zhi-ming, CHENG Yuan-sheng, LUO Shou-jing |
2079 |
Effect of magnetic-field heat treatment on magnetic properties of Nd2Fe14B/α-Fe nanocrystalline permanent magnets |
LIAN Li-xian, LIU Ying, LI Jun, GAO Sheng-ji, TU Ming-jing |
2085 |
Flow stress of high-strength weldable 2195 aluminium-lithium alloy during hot compression deformation |
HAN Dong-feng, ZHENG Zi-qiao, JIANG Na, LI Jing-feng |
2090 |
Microstructural evolution during self-propagating high temperature synthesis of TiC-Al cermet |
XIAO Guo-qing, FAN Qun-cheng , GU Mei-zhuan,JIN Zhi-hao |
2096 |
First-principle calculation for site substitution of 3d transition metal elements in NiAl intermetallic compound |
HU Yan-jun,PENG Ping,ZHOU Dian-wu, LI Gui-fa,ZHENG Cai-xing, HAN Shao-chang |
2102 |
Ni-Fe-C-Si self-lubricating material and its properties |
CHEN Li-juan,ZHU Ding-yi,TANG Wei,GUAN Xiang-feng |
2108 |
Thermal decomposition mechanism of manganese salicylate and shape of nanometric manganese oxide |
LI Liang-chao, HAO Shi-you, LIN Qiu-yue |
2114 |
Detection of ultrasonic induced free radicals in sodium aluminate liquor |
LIU Ji-bo, CHEN Qi-yuan, ZHANG Mu-qun,YIN Zhou-lan, ZHANG Ping-min |
2120 |
Behavior of overcharging additives for electrolyte used in Li-ion batteries |
HU Chuan-yue,LI Xin-hai,WANG Zhi-xin, GUO Hua-jun |
2125 |
Preparation and characterization of Co3O4 by thermal decomposition from cobalt oxalate |
LIAO Chun-fa, LIANG Yong, CHEN Hui-huang |
2131 |
Preparation of boron powder by self-propagating high temperature synthesis metallurgy |
DOU Zhi-he, ZHANG Ting-an |
2137 |