中国有色金属学报2022年第32卷第3期-《中国有色金属学报》官方网站|全网首发

您目前所在的位置：首页 - 期刊目录

中国有色金属学报

The Chinese Journal of Nonferrous Metals

第32卷第3期 2022年3月

材料科学与工程
2014铝合金挤压棒心表组织差异对热变形和再结晶的影响	胡昊¹，赵帆¹，张志豪^{1, 2}，谢建新^{1, 2}	603
Si、Er对Al-Zr合金时效析出行为的影响	梁上上，文胜平，刘祺祥，吴晓蓝，高坤元，黄晖，聂祚仁	619
航空发动机用单晶高温合金成分设计研究进展	张龙飞^{1, 2}，江亮³，周科朝¹，黄再旺¹	630
沉淀强化钴基单晶高温合金凝固行为的研究进展	艾诚¹，王国鑫¹，郭敏²，孙志平¹，张凤英¹，刘林²	645
选区激光熔化共晶高熵合金凝固行为	苏捷¹，陈仕奇¹，丁正阳²，刘彬¹，刘咏¹	658
7075铝合金回归过程的电化学分析	苏睿明，王磊，李广龙，曲迎东，李荣德	670
双级峰时效对超高强Al-Zn-Mg-Cu合金微观组织与力学性能的影响	韩宝帅，曾元松，荣刚，刘雅菲，马晓光，徐严谨，韩秀全	679
AZ91镁合金TIG电弧增材微观组织与力学性能	倪程¹，朱科宇¹，范霁康^{1, 2}，彭勇¹，杨东青¹，王克鸿¹	692
镁合金带内筋筒形件热强旋成形织构演变	袁帅^{1, 2}，夏琴香¹，肖刚锋¹，龙锦川¹	700
双相LZ91镁锂合金超塑性变形行为及组织演变	刘金学¹，解海涛^{1, 2}，郭晓光¹，肖阳¹，赵红亮²，关绍康²，白明华³	713
挤压铸造态AZ91D镁合金的流变应力和动态再结晶行为	陈永生^{1, 2}，孙晓梅³，吉泽升¹，安洪亮³	721
挤压和时效态Mg-Y-Cu合金的显微组织和力学性能	毕广利^{1, 2}，张妞明^{1, 2}，姜静^{1, 2}，陈体军^{1, 2}，蒋春宏³，李元东^{1, 2}	731
固溶时效及预拉伸变形对Ti-5.5Al-2Zr-1Mo-2.5V合金管材组织演化及强韧性的影响	伍贵成¹，刘会群^{2, 3}，冯春⁴，李睿哲⁵，易丹青²	741
变形温度对大塑性变形TA15合金显微组织和力学性能的影响	纪小虎^{1, 2}，孟淼¹，严思梁¹，李萍¹，甘国强¹，薛克敏¹	752
激光粉末沉积轻质Ti/Al密度梯度材料的裂纹形成机理及自愈合行为	刘阳^{1, 2, 3}，宋宇峰¹，谭欣荣^{1, 3}，刘文胜²，蔡青山²，梁超平²，陈振湘³，杨凯³，陈宇强¹，刘文辉¹	763
锂离子电池极片辊压微观结构演化与过程建模	张俊鹏¹，黄华贵¹，孙静娜¹，李金蕊¹，苑振革²	776
La-Y-Ni系A₅B₁₉型退火合金的相结构和电化学性能	李军鹏¹，邓安强¹，杨洋¹，潘富健¹，张海民¹，罗永春^{1, 2}	788
一维/二维混合碳纳米相增强铝基复合材料的微观组织与力学性能	陈俊锋^{1, 3}，柳超农¹，卢锐涵¹，王文龙¹，汪炳叔¹，邹林池^{2, 3}	800
热处理对金纳米棒光学性能的影响	刘伟^{1, 2}，胡树兵^{1, 2}，颜文杰^{1, 2}	815
316L钢表面Fe-Al/Al₂O₃涂层的制备及其高温氧化行为	肖来荣^{1, 2}，苏衡¹，赵小军^{1, 2}，蔡圳阳^{1, 2}，陈伟¹，余华丽¹	823
强磁场对FePt纳米粒子液相生长速率的影响	吴纯^{1, 2}，鞠玉萍¹，江亚男¹，董世知¹，任鑫¹，裴文利³，王凯²，王强²	836
Ti-39Nb合金变形行为的原位同步辐射X射线衍射研究	孟庆坤^{1, 2, 5}，梅碧舟²，张盼³，戚继球¹，隋艳伟¹，郭顺⁴	845
冶金工程• 矿业工程 • 化学化工
铜冶炼烟尘与污酸协同浸出体系中铜砷浸出行为	张耀阳，李存兄，张兆闫，吉文斌，林晓坦，黄进	856
CO-CO₂混合气体还原WO₃至WO_2.72的反应行为	李梦超¹，王璐^{1, 2}，杨帆³，薛正良^{1, 2}	866
低品位磁铁矿微波连续和脉冲加热辅助磨矿的对比研究	严妍^{1, 2}，陈楷华^{1, 2}，陈静^{1, 2}，郭胜惠^{1, 2, 3}	883
深部硬岩截割特性及可截割性改善方法	王少锋¹，李夕兵¹，王善勇²，姚金蕊³	895
冲击加载下尾砂胶结充填体力学行为及变形破坏特征	杨世兴^{1, 2}，王洪江^{1, 2}，侯永强^{1, 2}，张敏哲^{1, 2}	908

The Chinese Journal of Nonferrous Metals

中国有色金属学报

Vol. 32 No. 3 March 2022

Materials Science and Engineering
Effect of microstructure difference between center and edge of 2014 aluminum alloy extruded bar on hot compression deformation and recrystallization microstructure	HU Hao, ZHAO Fan, ZHANG Zhi-hao, XIE Jian-xin	603
Effect of Si and Er on aging precipitation behavior ofAl-Zr alloys	LIANG Shang-shang, WEN Sheng-ping, LIU Qi-xiang, WU Xiao-lan, GAO Kun-yuan, HUANG Hui, NIE Zuo-ren	619
Research progress of compositional design in nickel-based single crystal superalloys for aero-engine applications	ZHANG Long-fei, JIANG Liang, ZHOU Ke-chao, HUANG Zai-wang	630
Research progress on solidification behaviors of γ'' strengthened cobalt-based single crystal superalloys	AI Cheng, WANG Guo-xin, GUO Min, SUN Zhi-ping, ZHANG Feng-ying, LIU Lin	645
Solidification behavior of eutectic high entropy alloy fabricated by selective laser melting	SU Jie, CHEN Shi-qi, DING Zheng-yang, LIU Bin, LIU Yong	658
Electrochemical analysis of 7075 aluminum alloy during retrogression	SU Rui-ming, WANG Lei, LI Guang-long, QU Ying-dong, LI Rong-de	670
Effect of two-stage peak ageing on microstructure and mechanical properties of ultra-high strength Al-Zn-Mg Cu alloy	HAN Bao-shuai, ZENG Yuan-song, RONG Gang, LIU Ya-fei, MA Xiao-guang, XU Yan-jin, HAN Xiu-quan	679
Microstructure and mechanical properties of TIG arc additive manufacturing of AZ91 magnesium alloy	NI Cheng, ZHU Ke-yu, FAN Ji-kang, PENG Yong, YANG Dong-qing, WANG Ke-hong	692
Texture evolution of magnesium alloy cylindrical parts with inner ribs during hot power spinning	YUAN Shuai, XIA Qin-xiang, XIAO Gang-feng, LONG Jin-chuan	700
Superplastic tensile properties and microstructure evolution of dual-phase LZ91 Mg-Li alloy	LUI Jin-xue, XIE Hai-tao, GUO Xiao-guang, XIAO Yang, ZHAO Hong-liang, GUAN Shao-kang, BAI Ming-hua	713
Flow stress and dynamic recrystallization behavior of squeeze-cast AZ91D alloy	CHEN Yong-sheng, SUN Xiao-mei, JI Ze-sheng, AN Hong-liang	721
Microstructure and mechanical properties of extruded and aged Mg-Y-Cu alloy	BI Guang-li, ZHANG Niu-ming, JIANG Jing, CHEN Ti-jun, JIANG Chun-hong, LI Yuan-dong	731
Impacts of solution aging treatment and prestretching on microstructure evolution and mechanical properties of Ti-5.5Al-2Zr-1Mo-2.5V alloy for petroleum pipe	WU Gui-cheng, LIU Hui-qun, FENG Chun, LI Rui-zhe, YI Dan-qing	741
Effect of deformation temperature on microstructures and mechanical properties of TA15 alloy with severe plastic deformation	JI Xiao-hu, MENG Miao, YAN Si-liang, LI Ping, GANG Guo-qiang, XUE Ke-min	752
Crack formation mechanism and self-healing behavior of lightweight Ti/Al density gradient materials prepared by laser powder deposition	LIU Yang, SONG Yu-feng, TAN Xin-rong, LIU Wen-sheng, CAI Qing-shan, LIANG Chao-ping, CHEN Zhen-xiang, YANG Kai, CHEN Yu-qiang, LIU Wen-hui	763
Microstructure evolution and process modeling for calendering of lithium-ion battery electrode	ZHANG Jun-peng, HUANG Hua-gui, SUN Jing-na, LI Jin-rui, YUAN Zhen-ge	776
Phase structure and electrochemical properties of La-Y-Ni-based A₅B₁₉-type annealed alloys	LI Jun-peng, DENG An-qiang, YANG Yang, PAN Fu-jian, ZHANG Hai-min, LUO Yong-chun	788
Microstructure and mechanical properties of 1D/2D carbon nanophase reinforced aluminum matrix composites	CHEN Jun-feng, LIU Chao-nong, LU Rui-han, WANG Wen-long, WANG Bing-shu, ZOU Lin-chi	800
Significance of heat treatment on optical properties of gold nanorods	LIU We, HU Shu-bing, YAN Wen-jie	815
Preparation and its high-temperature oxidation behavior of Fe-Al/Al₂O₃ coating on 316L steel	XIAO Lai-rong, SU Heng, ZHAO Xiao-jun, CAI Zhen-yang, CHEN Wei, YU Hua-li	823
Effect of high magnetic field on liquid-phase growth rate of FePt nanoparticles	WU Chun, JU Yu-ping, JIANG Ya-nan, DONG Shi-zhi, REN Xin, PEI Wen-li, WANG Kai, WANG Qiang	836
In situ synchrotron X-ray diffraction study of deformation behavior of Ti39Nb alloy	MENG Qing-kun, MEI Bi-zhou, ZHANG Pan, QI Ji-qiu, SUI Yan-wei, GUO Shun	845
Metallurgical Engineering, Mine Engineering, Chemistry and Chemical Engineering
Leaching behavior of copper and arsenic in collaborative leaching system of copper-smelting dust and waste acid	ZHANG Yao-yang, LI Cun-xiong, ZHANG Zhao-yan, JI Wen-bin, LIN Xiao-tan, HUANG Jin	856
Reaction behavior of reduction of WO₃ to WO_2.72 under CO-CO₂ mixed gases	LI Meng-chao, WANG-Lu , YANG-Fan , XUE Zheng-liang	866
Comparative study on microwave-assisted grinding of low-grade magnetite by continuous heating and pulsed heating	YAN Yan, CHEN Kai-hua, CHEN Jing, GUO Sheng-hui	883
Fragmentation characteristics of deep hard rock and improvement for rock cuttability	WANG Shao-feng, LI Xi-bing, WANG Shan-yong, YAO Jin-rui	895
Mechanical behavior and deformation failure characteristics of cemented tailings backfill under impact loading	YANG Shi-xing, WANG Hong-jiang, HOU Yong-qiang, ZHANG Min-zhe	908

ISSN 1004-0609
CN 43-1238/TG
CODEN: ZYJXFK

ISSN 1003-6326
CN 43-1239/TG
CODEN: TNMCEW