Materials Science and Engineering |
Research development of squeeze casting technology of aluminum alloy |
JIANG Ju-fu, LI Ming-xing, WANG Ying |
2313 |
Effect of process parameters of continuous casting on microstructure and mechanical properties of pure aluminum tube |
WANG Yi-xiao, LIU Xin-hua, XIE Jian-xin, TIAN Yu-xing, ZHENG Zhi-kai, MAO Xiao-dong |
2330 |
Effect of creep temperature on high temperature creep properties of vacuum counter-pressure graded pressure casting ZL114A alloy |
WU Xiao-yu, YAN Qing-song, LU Gang, HUANG Peng-peng, HUANG Pu-ying |
2339 |
Effect of quenching rate on microstructure and mechanical properties of 7136 aluminum alloy |
ZHENG Peng-cheng, MA Zhi-min, LIU Hong-lei, LIU Sheng-dan, XIAO Yang, WEI Wei-chang |
2348 |
Simulation optimization of die-casting process, microstructure and mechanical properties of Al-7Si-0.35Mg-0.1Ti alloys |
LIU Wen-cai, DING De-hua, WANG Yong-bo, LU Ye-jun |
2357 |
Effects of mass ratio of Cr to Mn on hot deformation behavior and microstructural evolution of Al-Mg-Si alloys |
ZHAO Shi-lin, TANG Jiao, ZHANG Yu-xiu, Hiromi NAGAUMI, YANG Xu-yue |
2371 |
Back-solution behavior of second phase of Al-Zn-Mg-Cu alloy in high pressure torsional deformation |
LI Ping, XU Bing, XU Hong-lei, LI Yun-Hui, YAN Si-liang, XUE Ke-min |
2382 |
Effects of enhanced solid solution on microstructure and properties of Al-Zn-Mg-Cu alloys used in fasteners |
HUANG Qing-mei, CHENG Quan-shi, YE Ling-ying, TANG Jian-guo, LIU Sheng-dan |
2390 |
Precipitation behavior of Al-Zn-Mg-Cu-Sc-Zr alloy during homogenization process |
LI Heng, TANG Kai, WANG Han, WANG Ke-sheng, LI Yu-kun, WU Yu-cheng |
2403 |
Effect of long-time thermal exposure on dimensional change of Al-Cu-Mg alloy |
SONG Yu-feng, YANG Liang, DING Xue-feng, XIAO Lai-rong, LIU Wen-hui, CHEN Yu-qiang, ZHU Bi-wu |
2412 |
Microstructure and properties of dissimilar materials Ti/Cu welding joint by arc welding |
LI Jie, ZHOU Peng, HUI Yuan-yuan |
2419 |
Deformation twinning behavior of TA7 titanium alloy under tension and compression |
ZHANG Bin, GUO Ling-mei, WANG Yang, LI Zi-ran |
2427 |
Microstructures, properties and strengthening mechanism of TiC/SiC synergistically reinforced aluminum matrix composites by selective laser melting |
HONG Xu-chao, LIU Yun-zhong, HUANG Bin |
2436 |
Low-temperature densification of molybdenum powder activated by high-energy ball milling |
LI Kai, WANG De-zhi, WU Zhuang-zhi, DUAN Bo-hua, LIU Xin-li |
2447 |
Effect of Er on mechanical properties of Zr55Cu30Al10Ni5 amorphous alloys |
DING Rui-xian, KOU Sheng-zhong, LI Xiao-cheng, FAN Jian-jun, LI Chun-ling, LI Chun-yan |
2455 |
Preparation of montmorillonite/epoxy resin anticorrosive membrane on aluminum plate and its properties |
LIU Jing-yi, LIU Shu-jie, WU Shi-zhao, GAO Jing, HU Xin-quan, LI Guo-hua |
2464 |
Void evolution of casting Cu/Al/Cu three-layer film by molecular dynamics simulation under cyclic loading |
PEI Hai-jiao, GUO Qiao-neng, YANG Shi-e, ZHOU Heng-chi, CAI Neng, ZHENG Yong-sheng |
2475 |
Preparation of Ti-Si intermetallic compound porous membrane materials |
LIU Zhuo-meng, LIU Zhong-jun, JI Shuai |
2490 |
Mine Engineering, Metallurgical Engineering, Chemistry and Chemical Engineering |
Directional distribution behavior regulation of lead and zinc in oxygen-enriched intensified copper smelting process |
WANG Song-song, WANG Qin-meng, TIAN Qing-hua, GUO Xue-yi, WANG Zhi, HOU Peng, PENG Guo-min |
2499 |
Research progress of influencing factors and processes reagents in cassiterite beneficiation |
CAO Yang, TONG Xiong, XIE Xian, ZHANG Wen-jie, CHEN Yu-meng, SONG Qiang, HUA Zhong-bao |
2512 |
Dissolution loss of aluminum in complex aluminum electrolytes |
FENG Sen, ZHANG Yi-fan, LIU Zhao-shun, LIU Ai-min, SHI Zhong-ning, WANG Zhao-wen, QIU Shi-lin, GAO Bing-liang |
2530 |
Lithium selective extraction from lithium-enriched solution by phosphate precipitation |
LIU Dong-fu, XIONG Jia-chun, XU Wen-hua, HE Li-hua, LIU Xu-heng, ZHAO Zhong-wei |
2541 |
Selective depression and mechanism of polycarboxylic acid in flotation separation of scheelite from fluorite |
CHEN Chen, SUN Wei, ZHU Hai-ling, ZHAO Zhong-wei, LIU Run-qing |
2551 |
Preparation of flower-like Mg(OH)2 from nickel laterite and its adsorption ability for Cu2+ and Ni2+ |
SHAO Hong-mei, CUI Yong, ZHANG Wei, XU Wen-di, LI Xue-tian, SHAO Zhong-cai |
2561 |
Optimization model of slope control parameters based on SR-BP neural network |
FANG Qing-hong, HU Bin, LI Jing, CUI Kai, ZHU Xin |
2573 |
Response of dynamic mechanical properties of alkali rice straw based cemented tailings backfill under SHPB impact load |
SONG Xue-peng, WANG Shi, WEI Mei-liang, LIU Wu, WANG Xiao-jun, TAO Tie-jun, WANG Jie |
2583 |
Ore-field structural system and its mechanism of rock-and ore-controlling processes of Yangla Cu deposit in northwest Yunnan, China |
LI Bo, WANG Xin-fu, YUE Yan, HUANG Zhi-long, TANG Guo, LIU Yue-dong, ZOU Guo-fu, XIANG Zuo-peng |
2596 |