| Materials Science and Engineering |
| Numerical simulation on residual stresses of aluminum alloy thick plates for aircraft applications: A review |
ZHU Kai, XIONG Bai-qing, YAN Hong-wei, ZHANG Yong-an, LI Zhi-hui, LI Xi-wu,WEN Kai, LIU Hong-wei, YAN Li-zhen |
961 |
| Effect of Sc and Zr on microstructure stability of 3102 aluminum tube |
LI Kai, YU Jiang-ping, LI Da-yong, PENG Ying-hong, ZOU Tian-xia |
974 |
| Microscopic damage evolution and fracture behaviors of CF/Al composites subject to transverse compression loading |
YANG Si-yuan, WANG Zhen-jun, ZHOU Jin-qiu, ZHANG Ao-di, WANG Zhong-yuan, CAI Chang-chun, YANG Wei, XU Zhi-feng, YU Huan |
985 |
| High strain rate deformation behaviors experimental study and numerical simulation of rolled AZ31 magnesium alloy loaded along different directions |
CHEN Yang, MAO Ping-li, WANG Zhi, LIU Zheng, WANG Rui-feng |
997 |
| Effect of times in heat straightening on stress corrosion cracking of 7N01 aluminum alloy |
LI Shuai, DONG Hong-gang, WANG Xing-xing, LIU Zhong-ying, ZHAO Jun-jie |
1010 |
| Tensile deformation of TA7 alloy at high temperature |
ZHANG Jing-qi, LIN Jian, HU Xiao, WEI Rui-gang, YUAN Shao-qian |
1019 |
| Effect of annealing treatment on microstructure and properties of a new Ni-Co-Cr based powder superalloy |
TAN Gang, LI Hui-zhong, WANG Yan, YANG Lei, HUANG Zheng-qin, LIU Min-xue, ZOU Tian-qi |
1027 |
| Research progress of new superelastic bearing material TiNi60 alloy |
YAN Chao, ZENG Qun-feng, YANG Hua-bin |
1038 |
| Microstructure and mechanical properties of Fe28Ni28Mn28Cr8Cu8 and Fe28Ni28Mn28Cr8Al8 high entropy alloys prepared by powder metallurgy |
XIA Ze-bang, CHEN Wei-ping, JIANG Zhen-fei, FU Zhi-qiang |
1049 |
| Friction and wear properties of laser in situ synthesized titanium diboride and NiTi alloy |
LIN Ying-hua, LIN Zhen-heng, CHEN Qing-tang, LEI Yong-ping |
1057 |
| Mechanism of ultrasound-assisted transient liquid phase bonding of magnesium alloy with Ni interlayer |
LI Yi-nan, YANG Cheng-fei, YAN Jiu-chun, PENG Zi-long |
1065 |
| Research on parameter estimation of Johnson-Cook constitutive model |
SHU Chang, CHENG Li, XU Yu |
1073 |
| Application of polymer modified anode in microbial fuel cell power generation and cobalt leaching |
SUN Yang, LIU Wei-ping |
1084 |
| Effect of citric acid and ethylene glycol on structure and properties of IrO2-SnO2 coatings prepared by thermal decomposition of inorganic salt solution |
JIANG Yu-si, XIAO Fang-ming, YANG Rui |
1091 |
| Porosity evaluation of micro-arc oxidation coating through Image-J and electrochemical methods |
CUI Xue-jun, NING Chuang-ming, SONG Shi-jie, WANG Lin, YANG Ruo-hao |
1101 |
| Mine Engineering, Metallurgical Engineering, Chemistry and Chemical Engineering |
| Multielement and multiphase equilibrium analysis of lead oxygen-enriched side-blown oxidation smelting |
LIU Yan-ting, YANG Tian-zu, LI Ming-zhou |
1110 |
| Hydrothermal decomposition of hazardous jarosite residue produced in zinc hydrometallurgy and transformation behavior of iron containing phase |
CHU Ming, LI Cun-xiong, ZHANG Peng, JI Wen-bin, WEI Chang, DENG Zhi-gan, LI Xing-bin, FAN Gang, LI Min-ting |
1119 |
| Gold leaching of high pressure acid leaching residue using a non-cyanide system and its mechanism |
GUO Xue-yi, ZHANG Lei, TIAN Qing-hua, YU Da-wei, CUI Fu-hui |
1131 |
| Effects of iron, arsenic and carbon removal from a dust of refractory gold concentrates on cyanide leaching |
CAO Pan, ZHANG Shuang-hua, ZHENG Ya-jie |
1142 |
| Enrichment of gold from iron matte sulfuric acid leaching residue from refractory gold concentrate by controlled potential chloridizing leaching |
ZHANG Fu-yuan, XU Liang, ZHAO Zhuo, ZHENG Ya-jie |
1153 |
| Effects of sodium ions on hydrothermal scorodite precipitation process and conversion behavior of metastable iron phase |
ZHANG Peng, LI Cun-xiong, WEI Chang, CHU Ming, ZHANG Jun |
1161 |
| Particles evolution during seeded precipitation of sodium aluminate solution by adding active seed |
YE Pu-hong, QI Tian-gui, ZHOU Qiu-sheng, WU Xin-ping, PENG Zhi-hong, LIU Gui-hua, LI Xiao-bin |
1172 |
| Technical route for removing impurities from copper powder of waste printed circuit boards using combination method of beneficiation and metallurgy |
LIU Wei-feng, JIA Rui, ZHU Peng-chun, ZHANG Du-chao, CHEN Lin, LU Su-jun, YANG Tian-zu |
1182 |
| Beneficiation method of wolframite image recognition based on deep learning |
WANG Li-guan, CHEN Si-jia, JIA Ming-tao, TU Si-yu |
1192 |
| Role and mechanism of xanthan gum in flotation separation of chalcopyrite and sphalerite |
FENG Bo, GUO Yu-tao, WANG Tao, PENG Jin-xiu, NING Xiang-han, WANG Hui-hui |
1202 |
| Rheological behavior of solid-liquid conversion stage of unclassified tailings backfill paste |
LI Cui-ping, YAN Bing-heng, HOU He-zi, LI Rong, LI Xue |
1209 |
