Structural Materials |
Quality index and hot tearing susceptibility of Al-7Si-0.35Mg-xCu alloys |
R. TAGHIABADI, A. FAYEGH, A. PAKBIN, M. NAZARI, M. H. GHONCHEH |
1275 |
Effect of post-weld heat treatment on joint properties of dissimilar friction stir welded 2024-T4 and 7075-T6 aluminum alloys |
B. SAFARBALI, M. SHAMANIAN, A. ESLAMI |
1287 |
Microstructural and mechanical behavior of blended powder semisolid formed Al7075/B4C composites under different experimental conditions |
A. JAVDANI, A. H. DAEI-SORKHABI |
1298 |
Evolution and distribution of Al2Sm phase in as-extruded AZ61-xSm magnesium alloys during semi-solid isothermal heat-treatment |
Chen-liang CHU, Zhi HU, Xiao LI, Hong YAN, Xiao-quan WU, Yuan-lu MAI |
1311 |
Microstructural characteristics of as-forged and β-air-cooled Zr-2.5Nb alloy |
Lin-jiang CHAI, Ke CHEN, Shu-yan WANG, Ji-ying XIA, Ting-ting WANG, Zhi-nan YANG |
1321 |
Significant influence of sharp grain boundary corner on tensile elongation of copper bars with columnar grains and its mechanism |
Zhang-zhi SHI, Hai-peng WANG, Xue-feng LIU |
1329 |
Functional Materials |
Sound absorption of several various nickel foam multilayer structures at aural frequencies sensitive for human ears |
Pei-sheng Liu, Xin-bang XU, Wei Cheng, Jing-he CHEN |
1334 |
Surface topography and cytocompatibility of metal injection molded Ti-22Nb alloy as biomaterial |
Da-peng ZHAO, Yu-kai CHEN, Ke-ke CHANG, Thomas EBEL, Bérengère J C LUTHRIGNER-FEYERABEND, Regine WILLUMEIT-R?MER, Florian PYCZAK |
1342 |
Superelastic behavior of nanostructured Ti50Ni48Co2 shape memory alloy with cold rolling processing |
E. MOHAMMAD SHARIFI, A. KERMANPUR |
1351 |
Microstructure and mechanical properties of FeCoCrNiMn high-entropy alloy produced by mechanical alloying and vacuum hot pressing sintering |
Hu CHENG, Yan-chong XIE, Qun-hua TANG, Cong RAO, Pin-qiang DAI |
1360 |
Microstructure and residual stress of TiN films deposited at low temperature by arc ion plating |
Hai-juan MEI, Sheng-sheng ZHAO, Wei CHEN, Qi-min WANG, Hai-feng LIANG |
1368 |
Dielectric characteristics and nonlinear properties of ZnO-polypyrrole composites |
Fariba TABRIZI, Mojtaba PARHIZKAR, Hassan BIDADI, Mohammad GHAFOURI |
1377 |
Photoluminescence behavior and visible light photocatalytic activity of ZnO, ZnO/ZnS and ZnO/ZnS/α-Fe2O3 nanocomposites |
Gaurav HITKARI, Sandhya SINGH, Gajanan PANDEY |
1386 |
Enhanced cycling stability of Mg-F co-modified LiNi0.6Co0.2Mn0.2-yMgyO2-zFz for lithium-ion batteries |
Qi-chao CHEN, Guan-jie YAN, Li-ming LUO, Fei CHEN, Tang-feng XIE, Shi-can DAI, Ming-liang YUAN |
1397 |
Optimization of three-dimensional boiling enhancement structure at evaporation surface for high power light emitting diode |
Jian-hua XIANG, Chao ZHOU, Chun-liang ZHANG, Gui-yun LIU, Cong-gui CHEN, Wei ZHOU |
1404 |
Mining, Mineral Processing, and Metallurgical Engineering |
Cutting parameter optimization for one-step shaft excavation technique based on parallel cutting method |
Qi-yue LI, Kai LIU, Xi-bing LI, Ze-wei WANG, Lei WENG |
1413 |
Hydrophobic flocculation flotation of rutile fines in presence of styryl phosphonic acid |
Xiao-tao HUANG, Wei XIAO, Hong-bo ZHAO, Pan CAO, Qi-xiu HU, Wen-qing QIN, Yan-sheng ZHANG, Guan-zhou QIU, Jun WANG |
1424 |
Pyrite oxidation in the presence of calcite and dolomite: Alkaline leaching, chemical modeling and surface characterization |
Ehsan BIDARI, Valeh AGHAZADEH |
1433 |
Leaching of chalcopyrite with hydrogen peroxide in hydrochloric acid solution |
Sanja J. PETROVI?, Grozdanka D. BOGDANOVI?, Milan M. ANTONIJEVI? |
1444 |
Dissolving behavior of ammonium paratungstate in (NH4)2CO3-NH3?H2O-H2O system |
Xiao-bin LI, Chun-hui GAO, Jie ZHOU, Qiu-sheng ZHOU, Tian-gui QI, Gui-hua LIU, Zhi-hong PENG |
1456 |
Recovery of magnetite from waste ferrous sulfate using polyethylene glycol (PEG) as a dispersant |
Ying-lin PENG, Wang YU, Ya-jie ZHENG |
1465 |