Structural Materials |
Grain boundary pre-precipitation and its contribution to enhancement of corrosion resistance of Al-Zn-Mg alloy |
Hui-zhong LI, San-cheng YAO, Xiao-peng LIANG, Yong-hui CHEN, Chao LIU, Lan HUANG |
2523 |
Effect of homogenization annealing on microstructure, composition and mechanical properties of 7050/6009 bimetal slab |
Guang-yuan YAN, Feng MAO, Fei CHEN, Zhi-qiang CAO, Tong-min WANG |
2532 |
Effects of annealing process on sagging resistance of cold-rolled three-layer Al alloy clad sheets |
Yuan-yuan ZHAO, Zhen-yan ZHANG, Li JIN, Jie DONG |
2542 |
Effect of twin-roll casting parameters on microstructure and mechanical properties of AA5083-H321 sheet |
A. HOSEINIFAR, S. SALARI, M. SOLTAN ALI NEZHAD |
2552 |
Effect of Mg on nucleation process of recrystallization in Al-Mg-Si/SiCp composite |
Bin LI, Bing-hui LUO, Ke-jian HE, Wen-li FAN |
2561 |
Influence of welding parameters on fracture toughness and fatigue crack growth rate in friction stir welded nugget of 2024-T351 aluminum alloy joints |
Danial GHAHREMANI MOGHADAM, Khalil FARHANGDOOST |
2567 |
Effect of welding parameters on semisolid stir welding of Mg-9Al-1Zn magnesium alloy |
V. A. HOSSEINI, H. AASHURI, A. H. KOKABI |
2586 |
Fatigue behavior of AZ31B magnesium alloy electron beam welded joint based on infrared thermography |
Hong-wei YANG, Ze-qin CUI, Wen-xian WANG, Bing-she XU, Hai-ying XU |
2595 |
Oxidation resistance of Si-coated TZM alloy prepared through combined process of plasma spray and laser surface melting |
Jeong-Min KIM, Tae-Hyung HA, Joon-Sik PARK, Hyun-Gil KIM |
2603 |
Properties and microstructure of Ti6Al4V by deformation accelerated low temperature plasma nitriding |
Yu-dong FU, Xiao-shuo ZHU, Zi-feng LI, Ke LENG |
2609 |
Functional Materials |
Effects of aspect ratio and loading rate on room-temperature mechanical properties of Cu-based bulk metallic glasses |
An-hui CAI, Yong LIU, Hong WU, Da-wei DING, Wei-ke AN, Guo-jun ZHOU, Yun LUO, Yong-yi PENG, Xiao-song LI |
2617 |
Effects of melt overheating degree on undercooling degree and amorphous forming of Nd9Fe85-xTi4C2Bx (x=10, 12) magnetic alloys |
Meng-lin YANG, Jing PAN, Xin-cai LIU, Xiao-yan XIAO, Yu-yong ZHAN |
2633 |
Microstructure and mechanical properties of WC-Co, WC-Co-Cr3C2 and WC-Co-TaC cermets fabricated by spark plasma sintering |
P. SIWAK, D. GARBIEC |
2641 |
Microstructures and properties of Al-50%SiC composites for electronic packaging applications |
Fei TENG, Kun YU, Jie LUO, Hong-jie FANG, Chun-li SHI, Yi-long DAI, Han-qing XIONG |
2647 |
Effect of ZrC-SiC content on microstructure and ablation properties of C/C composites |
Jun LI, Xin YANG, Zhe-an SU, Liang XUE, Ping ZHONG, Shuai-peng LI, Qi-zhong HUANG, Hong-wei LIU |
2653 |
Application of pre-alloyed powders for diamond tools by ultrahigh pressure water atomization |
Zhi-qiang CHU, Xue-yi GUO, Dong-hua LIU, Yan-xian TAN, Dong LI, Qing-hua TIAN |
2665 |
Effect of glass fibre (GF) addition on microstructure and tensile property of GF/Pb composites fabricated by powder metallurgy |
Yao-hong GENG, Peng-hu WANG |
2672 |
Mechanical properties of Cu matrix composite fabricated by extrusion process |
Ji-Hun PAK, Gwi-Nam KIM, Sung-Gu HWANG,Beom-Su KIM, Jung-Pil NOH, Sun-Chul HUH |
2679 |
Influence of synthesis temperature on electrochemical performance of polyoxomolybdate as cathode material of lithium ion battery |
Wen-liang LI, Er-fu NI, Xin-hai LI, Hua-jun GUO |
2687 |
One-pot synthesis of poly vinyl alcohol (PVA) supported silver nanoparticles and its efficiency in catalytic reduction of methylene blue |
P. SAGITHA, K. SARADA, K. MURALEEDHARAN |
2693 |
Preparation and characterization of MWCNTs/LDHs nanohybrids for removal of Congo red from aqueous solution |
Ya-ling LONG, Jin-gang YU, Fei-peng JIAO, Wei-jie YANG |
2701 |
Mine Engineering, Metallurgical Engineering, Chemistry and Chemical Engineering |
Mechanical model for failure modes of rock and soil under compression |
Lian-sheng TANG, Hai-tao SANG, Jing SONG, Zhen-gui LUO, Yin-lei SUN |
2711 |
Three-dimensional orebody modelling and intellectualized longwall mining for stratiform bauxite deposits |
Shao-feng WANG, Xi-bing LI, Shan-yong WANG, Qi-yue LI, Chong CHEN, Fan FENG, Ying CHEN |
2724 |
Separation of W and Mo from their peroxoacids solutions by thermal decomposition |
Wen-juan ZHANG, Jiang-tao LI, Zhong-wei ZHAO, Fei LI |
2731 |
Anodic dissolution behavior of zirconium in Bun4NBr-containing isopropanol solution |
Xi-yun YANG, Hai-qiang HUANG, Sheng-hai YANG |
2738 |
Theoretical simulation and experimental study of hydrolysis separation of SbCl3 in complexation-precipitation system |
Qing-hua TIAN, Yun-tao XIN, Li YANG, Xue-hai WANG, Xue-yi GUO |
2746 |
Two-step sintering of magnesium aluminate spinels and their corrosion in Na3AlF6-AlF3-CaF2-Al2O3 bath |
Jian-hua LIU, Xiao-jun Lü, Jie LI, Ling-yun HU, Liang-xing JIANG |
2754 |
Liquid phase separation and subsequent dendritic solidification of ternary Fe35Cu35Si30 alloy |
Sheng-bao LUO, Wei-li WANG, Zhen-chao XIA, Bing-bo WEI |
2762 |
Sessile drop evaluation of high temperature copper/spinel and slag/spinel interactions |
E. de WILDE, I. BELLEMANS, M. CAMPFORTS, M. GUO, B. BLANPAIN, N. MOELANS, K. VERBEKEN |
2770 |
Structural changes and volatility correlation in nonferrous metal market |
Dan WU, Zhen-hua HU |
2784 |