中国有色金属学报(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 26 No. 10 October 2016 |
（1. Materials Science and Engineering College, Northeast Forestry University, Harbin 150040, China;
2. School of Naval Architecture and Ocean Engineering,
Harbin Institute of Technology at Weihai, Weihai 264209, China）
Abstract:GF/Pb composites were fabricated by the method of powder metallurgy, and the density, microstructure and tensile property were characterized considering the size and content of glass fibre (GF). The results show that relative densities decrease with increasing GF fraction, and the 50 μm-GF reinforced specimens exhibit a better densification than the 300 μm-GF reinforced ones. The GF particles distribute quite uniformly in Pb matrix, and the composites fabricated at low sintering temperature (<200 °C) possess fine-grain microstructure. The addition of GF significantly improves the strength of the Pb composites, and the ultimate tensile strength of the Pb composite reinforced with the addition of 50 μm-0.5% GF (mass fraction) is about 30 MPa higher than that of GF-free sample. For all composites groups, increasing the reinforcement content from 0.5% to 2% (mass fraction) results in a decrease in both tensile strength and ductility.
Key words: GF/Pb composites; powder metallurgy; sintering microstructure; tensile property
