中国有色金属学报2012年第22卷第11期-《中国有色金属学报》官方网站|全网首发

您目前所在的位置：首页 - 期刊目录

中国有色金属学报

The Chinese Journal of Nonferrous Metals

第22卷第11期 2012年11月

结构材料
道次压下量和退火工艺对Mg-Zn-Ce-Zr合金微观组织及力学性能的影响	张亚萍^{1, 2}，靳丽^{1, 2}，董杰^{1, 2}，章桢彦^{1, 2}，王瑶^{1, 2}	2985
镁合金板材颗粒介质拉深工艺参数数值模拟	曹秒艳¹，赵长财¹，董国疆²	2992
AZ31镁合金高应变速率多向锻造组织演变及力学性能	吴远志，严红革，陈吉华，朱素琴，薄红伟，王林伟	3000
7150铝合金三级过时效热处理制度	韩小磊，熊柏青，张永安，朱宝宏，李志辉，李锡武，王锋，刘红伟	3006
固溶处理对Ti-3.0Al-2.3Cr-1.3Fe钛合金组织与力学性能的影响	王国，惠松骁，叶文君，米绪军	3015
TC11合金两相区退火对微观组织与微观织构的影响	李赛毅^{1, 2}，文浩¹，雷力明^{3, 4}，张慧儒^{1, 5}	3022
喷射成形FGH95高温变形流变应力行为与预测	郭彪¹，葛昌纯^1,2，徐轶¹，张宇²，孙传水²	3029
ZAlSi₇Cu₄在不同工艺条件下的热疲劳裂纹生长	张志坚¹，司乃潮¹，孙少纯¹，刘光磊¹，吴勤方²	3038
固溶−时效热处理对易切削变形Zn-10Al-1.0Cu-xBi-ySn合金组织与性能的影响	林高用^1,2，王莉¹，张锐¹，雷玉霞¹，贺家健¹，宋佳胜¹	3046
C/C-SiC-Cu₃Si复合材料的氧化行为	李娜，肖鹏，李专，刘逸众	3054
热等静压制备Si_p/Al-Cu复合材料的组织与性能	刘孝飞，刘彦强，樊建中，魏少华，马自力，左涛	3059
Al替代Fe对<110>取向Tb-Dy-Fe合金显微组织、磁致伸缩性能和力学性能的影响	胡勇^{1, 2}，丁雨田^{1, 2}，王晓莉¹，李晓诚¹，王国斌¹	3066
功能材料
碳纤维增强Ag-MoS₂复合材料的摩擦磨损性能	马超，王新平，张雷，周科朝	3074
炭/炭复合材料ZrC涂层的制备及显微组织结构	王雅雷，熊翔，李国栋，赵学嘉	3081
微波和传统氢气烧结对93W-Ni-Fe正挤压棒坯结构和力学性能的影响	张佳佳，刘文胜，马运柱，贺柳青	3088
锡对改善铅−钢层状复合材料结合界面及其性能的影响	梁方，竺培显，周生刚，孙德林，马会宇	3094
高铝铜合金粗粉超音速等离子喷涂层的边界润滑摩擦特性	杨效田¹，王智平¹，路阳¹，李霞²，周晶晶¹	3100
溶胶−凝胶法CeO₂涂覆钨纤维工艺	马运柱，黄倩芳，刘文胜	3107
电沉积Ni-Co-B纳米晶合金代硬铬镀层	崔莹¹，杨培霞¹，刘磊¹，曾鑫²，郭伟荣²，项昕²，安茂忠¹	3113
磁控溅射制备TiCN复合膜的微结构与性能	许俊华，曹峻，喻利花	3123
微量Zn对高压电解电容器阳极铝箔比电容的影响	左宏^{1, 2}，刘春明¹	3129
MnO₂·0.5H₂O的固相法制备及其对Li⁺的吸附动力学	石西昌，张志兵，周喜诚，周定方，肖湘，陈白珍	3135
Ni²⁺掺杂对Li₃V₂(PO₄)₃电化学性能的影响	鲁道荣^{1, 2}，胡德鹏¹，刘兴亮¹	3144
接触线用Cu-Ag-Zr-Ce合金的电滑动磨损性能	贾淑果^{1, 2}，苏娟华¹，宋克兴1，任凤章¹，刘平¹	3151
气相分压对Co-Fe-Sb三元体系相平衡和相稳定性的影响	张玉碧^{1, 2}，李长荣¹，杜振民¹，郭翠萍¹，王东哲²	3157
热浸镀锌铝的界面反应机理	彭浩平^{1, 2, 3}，苏旭平¹，王建华¹，李智³，刘亚¹	3168
带钢热连轧工作辊温度场与热凸度的数值模拟	李维刚^{1, 3}，刘相华²，郭朝晖³	3176
矿业工程·冶金工程·化学与化工
InSAR矿区形变监测的边缘保持−Goldstein组合滤波方法	易辉伟^{1, 2}，朱建军^{1, 2}，李健^{1, 2}，李佳^{1, 2}，严新生³，陈树泉³	3185
位移反分析的模式搜索支持向量机方法及其应用	刘　永，张志军，贺桂成，丁德馨	3193
黄药类捕收剂对细菌浸出黄铜矿的抑制机理	董颖博^{1, 2}，林海^{1, 2}，周闪闪^{1, 2}	3201
锈蚀法提取预还原红土镍矿中镍和钴	赵玉先，胡启阳，李新海，王志兴，郭华军	3208
六偏磷酸钠对菱锰矿与方解石浮选分离的影响	罗娜^{1, 2}，张国范¹，朱阳戈¹，崔萌萌¹	3214
Urea-NaCl-ZnCl₂离子液体中电沉积Zn-Ti合金	刘成虎，华一新，徐存英，李艳，裴启飞，吴振	3221
AlCl₃-BMIC离子液体中Na⁺含量对铝电沉积的影响	裴启飞^{1, 2}，华一新^{1, 2}，徐存英^{1, 2}，李艳^{1, 2}，龚凯^{1, 2}，吴振^{1, 2}，刘成虎^{1, 2}	3229
Nb⁵⁺掺杂LiFePO₄/C的反应挤出合成	刘旭恒^{1, 2}，黄少波²，赵中伟²，王德志¹	3236
WC-Co复合粉的喷雾造粒及松装密度的影响因素	王海滨^{1, 2}，宋晓艳^{1, 2}，刘雪梅^{1, 2}，付军^{1, 2}，魏崇斌^{1, 2}，高杨^{1, 2}	3241
十八硫醇自组装膜对青铜的缓蚀作用	杜伟¹，李佳佳¹，万俐²，陈步荣¹，丁毅¹	3249
基于投影寻踪回归的铜闪速熔炼过程关键工艺指标预测	刘建华，桂卫华，谢永芳，王雅琳，蒋朝辉	3255
K₂L-SAMs对碳钢在饱和CO₂油田水中的缓蚀行为与量子化学研究	陈世亮^{1, 2}，刘峥¹，刘洁¹，何育梅¹	3261
含对甲基苯基侧链基团的氧肟酸赤泥沉降剂的合成与性能	陈锋¹，刘炳迪¹，王磊¹，毕诗文²，吴玉胜³	3270
松醇油降解菌的分离鉴定及降解条件优化	梁杰慧，孙水裕，杜青平，刘敬勇，黄绍松，尹光彩，田静，曾佳俊，许娉婷	3278
腐殖质AQS存在条件下腐败希瓦氏菌还原U(Ⅵ)的特性	谢水波^{1, 2}，张亚萍¹，刘金香²，刘迎九¹，李仕友²，王劲松¹，刘海燕¹	3285

The Chinese Journal of Nonferrous Metals

中国有色金属学报

Vol. 22 No. 11 November 2012

Structural Materials
Effects of per-pass reduction and annealing treatment on microstructures and mechanical properties of Mg-Zn-Ce-Zr alloy	ZHANG Ya-ping, JIN Li, DONG Jie, ZHANG Zhen-yan, WANG Yao	2985
Numerical simulation on granules medium drawing process parameters of magnesium alloy sheet	CAO Miao-yan, ZHAO Chang-cai, DONG Guo-jiang	2992
Microstructure evolution and mechanical properties of AZ31 magnesium alloy fabricated by high strain rate triaxial-forging	WU Yuan-zhi, YAN Hong-ge, CHEN Ji-hua, ZHU Su-qin, BO Hong-wei, WANG Lin-wei	3000
Triple over-aging treatment of 7150 aluminum alloy	HAN Xiao-lei, XIONG Bai-qing, ZHANG Yong-an, ZHU Bao-hong, LI Zhi-hui, LI Xi-wu, WANG Feng, LIU Hong-wei	3006
Influence of solution treatment on microstructure and mechanical properties of Ti-3.0Al-2.3Cr-1.3Fe titanium alloy	WANG Guo, HUI Song-xiao, YE Wen-jun, MI Xu-jun	3015
Effect of annealing in two-phase field on microstructure and microtexture of TC11 alloy	LI Sai-yi, WEN Hao, LEI Li-ming, ZHANG Hui-ru	3022
Flow stress behavior and prediction of spray-forming FGH95 superalloy at elevated temperature	GUO Biao, GE Chang-chun, XU Yi, ZHANG Yu, SUN Chuan-shui	3029
Thermal fatigue crack growth of ZAlSi₇Cu₄ under different technological conditions	ZHANG Zhi-jian, SI Nai-chao, SUN Shao-chun, LIU Guang-lei, WU Qin-fang	3038
Effect of solution and aging treatment on the microstructure and properties of free-cutting deformation Zn-10Al-1.0Cu-xBi-ySn alloy	LIN Gao-yong, WANG Li, ZHANG Rui, LEI Yu-xia, HE Jia-jian, SONG Jia-sheng	3046
Oxidation behavior of C/C-SiC-Cu₃Si composites	LI Na, XIAO Peng, LI Zhuan, LIU Yi-zhong	3054
Microstructure and properties of Si_p/Al-Cu composites fabricated by hot isostatic pressing	LIU Xiao-fei, LIU Yan-qiang, FAN Jian-zhong, WEI Shao-hua, MA Zi-li, ZUO Tao	3059
Effects of substituting Al for Fe on microstructure, magnetostriction and mechanical properties of <110> oriented Tb-Dy-Fe alloy	HU Yong, DING Yu-tian, WANG Xiao-li, LI Xiao-cheng, WANG Guo-bin	3066
Functional Materials
Friction and wear properties of Ag-MoS₂/carbon fibers reinforced composites	MA Chao, WANG Xin-ping, ZHANG Lei, ZHOU Ke-chao	3074
Preparation and microstructure of ZrC coatings for C/C composites	WANG Ya-lei, XIONG Xiang, LI Guo-dong, ZHAO Xue-jia	3081
Influence of microwave and conventional hydrogen sintering on microstructure and mechanical properties of 93W-Ni-Fe extruded bars	ZHANG Jia-jia, LIU Wen-sheng, MA Yun-zhu, HE Liu-qing	3088
Influence of tin on improving bonding interface and performance of lead-steel laminated composites	LIANG Fang, ZHU Pei-xian, ZHOU Sheng-gang, SUN De-lin, MA Hui-yu	3094
Boundary lubrication tribological property of high-aluminium copper alloy coarse powders coating made by supersonic plasma spraying	YANG Xiao-tian, WANG Zhi-ping, LU Yang, LI Xia, ZHOU Jing-jing	3100
Process of CeO₂ coating on tungsten fibers by sol-gel method	MA Yun-zhu, HUANG Qian-fang, LIU Wen-sheng	3107
Ni-Co-B nanocrystalline alloy electrodeposition for substituting hard chromium	CUI Ying, YANG Pei-xia, LIU Lei, ZENG Xin, GUO Wei-rong, XIANG Xin, AN Mao-zhong	3113
Microstructure and properties of TiCN composite films prepared by magnetron sputtering	XU Jun-hua, CAO Jun, YU Li-hua	3123
Influence of trace Zn on specific capacitance of high voltage aluminum anode foil used in high voltage electrolytic capacitors	ZUO Hong, LIU Chun-ming	3129
Synthesis of MnO₂·0.5H₂O by solid method and its adsorption dynamics for Li⁺	SHI Xi-chang, ZHANG Zhi-bing, ZHOU Xi-cheng, ZHOU Ding-fang, XIAO Xiang, CHEN Bai-zhen	3135
Effects of doping Ni²⁺on electrochemical performance of Li₃V₂(PO₄)₃	LU Dao-rong, HU De-peng, LIU Xing-liang	3144
Electrical sliding wear property of Cu-Ag-Zr-Ce alloy for contact wire	JIA Shu-guo, SU Juan-hua, SONG Ke-xing, REN Feng-zhang, LIU Ping	3151
Effect of gas phase pressure on phase stability and phase equilibrium of Co-Fe-Sb ternary system	ZHANG Yu-bi, LI Chang-rong, DU Zhen-min, GUO Cui-ping, WANG Dong-zhe	3157
Interface reaction mechanism for galvanizing in Zn-Al baths	PENG Hao-ping, SU Xu-ping, WANG Jian-hua, LI Zhi, LIU Ya	3168
Numerical simulation of temperature field and thermal crown of work roll during hot strip rolling	LI Wei-gang, LIU Xiang-hua, GUO Zhao-hui	3176
Mine Engineering, M
An edge preservation-Goldstein filter for InSAR inteferograms used in monitoring deformation of mining area	YI Hui-wei, ZHU Jian-jun, LI Jian, LI Jia, YAN Xin-sheng, CHEN Shu-quan	3185
PSA-SVM approach for back analysis of displacements and its application	LIU Yong, ZHANG Zhi-jun, HE Gui-cheng, DING De-xin	3193
Inhibition mechanism of xanthate collectors on chalcopyrite bioleaching	DONG Ying-bo, LIN Hai, ZHOU Shan-shan	3201
Extraction of nickel and cobalt from reductive laterite by corrosion process	ZHAO Yu-xian, HU Qi-yang, LI Xin-hai, WANG Zhi-xing, GUO Hua-jun	3208
Effect of sodium hexametaphosphate on flotation separation of rhodochrosite from calcite	LUO Na, ZHANG Guo-fan, ZHU Yang-ge, CUI Meng-meng	3214
Electrodeposition of Zn-Ti alloy in urea-NaCl-ZnCl₂ ionic liquid	LIU Cheng-hu, HUA Yi-xin, XU Cun-ying, LI Yan, PEI Qi-fei, WU Zhen	3221
Effect of Na⁺ content on electrodeposition of aluminum from AlCl₃-BMIC ionic liquid	PEI Qi-fei, HUA Yi-xin, XU Cun-ying, LI Yan, GONG Kai, WU Zhen, LIU Cheng-hu	3229
Synthesis of LiFePO₄/C doped with Nb⁵⁺ by reaction extrusion	LIU Xu-heng, HUANG Shao-bo, ZHAO Zhong-wei, WANG De-zhi	3236
Spray granulation of WC-Co composite powders and influencing factors of apparent density	WANG Hai-bin, SONG Xiao-yan, LIU Xue-mei, FU Jun, WEI Chong-bin, GAO Yang	3241
Corrosion inhibition of bronze by self-assembled monolayers of octadecanethiol	DU Wei, LI Jia-jia, WAN Li, CHEN Bu-rong, DING Yi	3249
Key process indicators predicting for copper flash smelting process based on projection pursuit regression	LIU Jian-hua, GUI Wei-hua, XIE Yong-fang, WANG Ya-lin, JIANG Zhao-hui	3255
Corrosion inhibition and quantum chemistry studies of K₂L-SAMs for carbon steel in CO₂-saturated oilfield water	CHEN Shi-liang, LIU Zheng, LIU Jie, HE Yu-mei	3261
Synthesis and properties of hydroxamic acid red mud flocculant containing side-chain of p-tolyl	CHEN Feng, LIU Bing-di, WANG Lei, BI Shi-wen, WU Yu-sheng	3270
Isolation and identification of pine oil degrading bacteria and optimization of degrading conditions	LIANG Jie-hui, SUN Shui-yu, DU Qing-ping, LIU Jing-yong, HUANG Shao-song, YIN Guang-cai, TIAN Jing, ZENG Jia-jun, XU Ping-ting	3278
Characteristics of reducing U(Ⅵ) by Shewanella putrefaciens in presence of anthraguinone-2-sulfonate (AQS)	XIE Shui-bo, ZHANG Ya-ping, LIU Jin-xiang, LIU Ying-jiu, LI Shi-you, WANG Jin-song, LIU Hai-yan	3285

ISSN 1004-0609
CN 43-1238/TG
CODEN: ZYJXFK

ISSN 1003-6326
CN 43-1239/TG
CODEN: TNMCEW