Structural Materials |
Quick gas blow forming behavior of AZ31B magnesium alloy sheet |
WANG Gang, WANG Jian-long, ZHANG Tuo-da, ZHANG Zhi-peng |
2023 |
Precipitation behaviors of
Al-Mg-Si-(Cu) aluminum alloys during continuous heating |
LI Hai, WANG Xiu-li, SHI Zhi-xin, WANG Zhi-xiu, ZHENG Zi-qiao |
2028 |
Effects of different solution time on microstructure and
mechanical properties of ZA72 magnesium alloy |
FENG Kai, HUANG Xiao-feng, MA Ying, CHEN Juan-juan, HAO Yuan |
2035 |
Microstructure formation mechanism of Mg-3Sn-1Mn alloy
during continuous rheo-forming process |
ZHAO Zhan-yong, GUAN Ren-guo, HUANG Hong-qian, CAO Fu-rong, DAI Chun-guang |
2043 |
Research progress of chemical conversion coatings on
magnesium alloys |
JIN He-xi, WANG Ri-chu, PENG Chao-qun, FENG Yan, SHI Kai, CHEN Bin |
2049 |
Effect of rolling deformation rate on
quench sensitivity of 7050 aluminum alloy plate |
ZHANG Xin-ming, LIU Wen-jun, LI Hong-ping, LIU Sheng-dan, ZHONG Qi-ming |
2060 |
Continuous cooling transformation of 2A12 aluminum alloy
studied by using in-situ electrical resistivity measurement |
LI Hong-ying, BIN Jie, WANG Xiao-feng, TANG Yi |
2068 |
Effects of melt thermal treatment and modification on
solidification microstructure of Al-20%Si alloy |
WANG Lian-deng, ZHU Ding-yi, CHEN Yong-lu, WEI Zhe-liang, LI Qiu-ju,HUANG Li-guang, SONG Wei, WU Hai-bin< |
2075 |
Effects of wavelike sloping plate rheocasting and spheroidisation on microstructures and properties of Al-18%Si-5%Fe alloy |
GUAN Ren-guo, CAO Fu-rong, ZHAO Zhan-yong, HUANG Hong-qian, ZHANG Qiu-sheng, WANG Chao |
2084 |
Hot compression behavior of Ag-SnO2 composite material |
XU Can-hui, YI Dan-qing, CAO Shi-yi, LIU Hui-qun, WU Chun-ping, SUN Shun-ping, LIU Run-yong |
2091 |
Structural, mechanical and tribological properties of
CrTiAlN coatings on Al alloy deposited by sputtering |
SHI Yong-jing, PAN Fu-sheng, WANG Wei-qing, YANG Shi-cai, LONG Si-yuan, ZHU Guang-jun |
2099 |
Microalloying role of Ce on F102 Ni-based self-fluxing alloy |
SHANG Li-juan, GAO Hua, YU Xing-fu |
2105 |
Hot compression deformation and
deformation mechanisms of TC21 alloy |
ZHOU Ge, DING Hua, CAO Fu-rong, ZHAO Wen-juan, HOU Hong-liang, LI Zhi-qiang |
2111 |
Functional Materials |
Progress of one-dimensional carbon nanomaterials
synthesized from ethanol flames |
QI Xiang, ZHANG Jun, ZHANG Yu-peng, PAN Chun-xu, ZHONG Jian-xin |
2119 |
Pyroplastic deformation behavior of
pure molybdenum plate slab and constitutive equation |
YANG Song-tao, LI Ji-wen, WEI Shi-zhong, XU Liu-jie, ZHANG Guo-shang, ZHANG Er-zhao |
2126 |
Effect of combining form on sound absorption of
closed-cell aluminum foam perforated |
LIANG Li-si, YAO Guang-chun, MU Yong-liang, HUA Zhong-sheng |
2132 |
Characteristics and microstructure of laser brazing Sip/Al composites |
LI Li-qun, TAO Wang, WANG Bin |
2139 |
Effect of Al-doping on structure and
eletrochemical performance of Li4Ti5O12 |
XIONG Xun-hui, WANG Zhi-xing, WU Ling, LI Xin-hai , WU Fei-xiang, GUO Hua-jun, PENG Wen-jie |
2146 |
Solidification process of Cu66Ti34 amorphous alloy
simulated by molecular dynamics |
QIU Ke-qiang, LI Hong, SUN Jing, YOU Jun-hua, REN Ying-lei, LI Qing-feng |
2151 |
Effects of electrodeposition methods on friction and
wear properties of Ni-CeO2 nanocomposite coatings |
XUE Yu-jun, SI Dong-hong, LIU Hong-bin, LI Ji-shun, LAN Ming-ming |
2157 |
Bonding property of Cu/Mo/Cu cladding metal materials by hot rolling |
ZHANG Bing, WANG Kuai-she, SUN Yuan-jun, WANG Sha |
2163 |
Wire beam electrode technique for investigating galvanic corrosion behavior of galvanized steel−spot defect |
ZHANG Da-lei, WANG Wei, JIN You-hai, TANG Xiao, LI Yan |
2168 |
Effect of pH value on performance of Ni0.8Co0.1Mn0.1(OH)2 and LiNi0.8Co0.1Mn0.1O2 synthesized via fast co-precip |
WANG Jie-xi, LI Xin-hai, WANG Zhi-xing, LI Ling-jun, GUO Hua-jun, YUE Peng, WU Ling |
2175 |
Distribution of residual thermal stress
in 316L stainless steel/Cu graded composite material |
HU Rui, LIU Tao, XUE Xiang-yi, CHANG Hui, KOU Hong-chao, LI Jin-shan |
2182 |
High cemperature oxidation behavior of
quaternary three-phase Cu-20Ni-20Cr-5Co alloy |
CAO Zhong-qiu, LI Feng-chun, YU Long |
2190 |
Computational Materials Scien |
Three-dimensional numerical simulation and optimization of
solidification structure of Al-Cu alloy |
BU Xiao-bing, LI Luo-xing, ZHANG Li-qiang, ZHU Bi-wu, WANG Shui-ping |
2195 |
Interface atomic bonding and mechanical properties of Al-Li-Zr alloy |
GAO Ying-jun, WEN Chun-li, MO Qi-feng, LUO Zhi-rong, HUANG Chuang-gao |
2202 |
Possible failure of pore-strut for
open-cell foamed metals under torsion and shearing |
LIU Pei-sheng, MA Xiao-ming |
2209 |
Phase-field simulation of dendrite growth for
binary alloy with strong anisotropy |
YUAN Xun-feng, DING Yu-tian |
2216 |
Morphology control technology of dendrite with
layer by layer guidance |
WANG Gui-feng, TIAN Zong-jun, LIU Zhi-dong, SHEN Li-da, HUANG Yin-hui |
2223 |
Stacking model of nano-particles and
heat transfer numerical analysis under thermal spraying conditions |
SHEN Li-da, TIAN Zong-jun, LIU Zhi-dong, ZHAO Jian-feng, HUANG Yin-hui |
2230 |
Mine |
Preparation of ultrafine zinc powders by
DC arc plasma evaporation method |
WANG Peng, ZHAO Fang-xia, ZHANG Zhen-zhong |
2236 |
Numerical simulation of melting process for
regenerative aluminum melting furnace |
WANG Ji-min, YAN Hong-jie, ZHOU Jie-min, LI Shi-xuan, GUI Guang-chen |
2242 |
Magnetic field simulation and design of
stationary stream pattern aluminum reduction cell |
LIANG Xue-min, LI Jie, ZHANG Hong-liang, WANG You-shan,LÜ, Xiao-jun, ZHANG He-hui, LIU Ye-xiang |
2251 |
Recycling Se and Te and capturing Pt and Pd from
solution after precipitating gold by SO2 reduction |
ZHENG Ya-jie, CHEN Kun-kun,SUN Zhao-ming |
2258 |
Preparation of Al-Ca master alloy by
liquid aluminium cathode method |
WANG Yi-yong, LI Ji-dong, JIN Hui, WANG Zhi-ying |
2265 |
Adsorption of heavy metal ions from
aqueous solutions by MgCl2 modified orange peel |
GUO Xue-yi, LIANG Sha, XIAO Cai-mei, TIAN Qing-hua |
2270 |
Effect of chemical fixation of Pb in mine contaminated soil using red mud-phosphorus composition particles |
Luo Hui-li, Huang Sheng-sheng, Luo Lin, Liu Yan, WEI Jian-hong |
2277 |
Effect of Zn2+ and HCO3− on arsenic removal from
drinking water by magnetite nanoparticles |
ZHAO Na, WANG Yu, YANG Wei-chun, WANG Yun-yan, CHAI Li-yuan |
2285 |
Effect of flotation reagents on bioleaching of
low grade copper tailings by Acidthiobacillus ferrooxidans |
DONG Ying-bo, LIN Hai, FU Kai-bin, MO Xiao-lan, WEN Hong-wei |
2291 |
Simulation on evolution of solution system in
precipitation of cobalt oxalate |
HE Xian-da, YE Hong-qi, XU Kai-hua, CHEN Yong-ming,DENG Wei, ZHOU Ji-feng, KUAI Qin, M. HOUNSLOW |
2298 |