Proceedings of 2012 Postdoctoral Symposium of China on Materials Science and Engineering
Structural Materials |
Nucleation and growth behaviors of primary phase in hypoeutectic Al−Cu alloy in high magnetic field |
LI Chuan-jun, REN Zhong-ming, REN Wei-li, WU Yu-qin |
1 |
Microstructure, tensile properties and fractography of A356 alloy under as-cast and T6 obtained with expendable pattern shell casting process |
JIANG Wen-ming, FAN Zi-tian, LIU De-jun |
7 |
Influences of aging temperature and time on microstructure and mechanical properties of 6005A aluminum alloy extrusions |
DING Xian-fei, SUN Jing, YING Jia, ZHANG Wei-dong, MA Ji-jun, WANG Li-chen |
14 |
Influence of tool parameters on internal voids in cross wedge rolling of aluminum alloy parts |
JIA Zhi, ZHOU Jie, JI Jin-jin, YU Ying-yan, XIAO Chuan |
21 |
Validity of three engineering models for fatigue crack growth rate affected by compressive loading in LY12M aluminum alloy |
SONG Xin, LI Hong-ping, SHAO Jun-peng, ZHANG Jia-zhen, WANG Ya-hui, YU Xiao-dong |
27 |
Preparation and characterization of SiCp/2024Al composite foams by powder metallurgy |
LI Ai-bin, XU Hong-yu, GENG Lin, LI Bin-ling, TAN Zheng-bin, REN Wei |
33 |
FEM modelling for press bend forming of doubly curved integrally stiffened aircraft panel |
YAN Yu, WANG Hai-bo, WAN Min |
39 |
Optimization for extrusion process of aluminum controller housing |
HU Cheng-liang, MENG Li-fen, ZHAO Zhen, GU Bing, CAI Bing |
48 |
Thickness distribution and mechanical property of sheet metal incremental forming based on numerical simulation |
LI Jun-chao, LI Chong, ZHOU Tong-gui |
54 |
Effect of severe plastic deformation on microstructure and mechanical properties of bulk AZ31 magnesium alloy |
XU Shu-bo , QIN Zhen, LIU Ting, JING Cai-nian, REN Guo-cheng |
61 |
Solid-state recycling of AZ91D magnesium alloy chips |
HU Mao-liang, JI Ze-sheng, CHEN Xiao-yu, WANG Qu-dong, DING Wen-jiang |
68 |
Novel multilayer Mg−Al intermetallic coating for corrosion protection of magnesium alloy by molten salts treatment |
HE Mei-feng, HU Wen-bin, ZHAO Su, LIU Lei, WU Ya-ting |
74 |
Effects of rolling deformation on microstructure and mechanical properties of network structured TiBw/Ti composites |
HUANG Lu-jun, CUI Xi-ping, GENG Lin, FU Yu |
79 |
Hot deformation behavior of Hastelly C276 superalloy |
LU Yan-ling, LIU Jin-xi, LI Xiao-ke, LIANG Jian-ping, LI Zhi-jun, WU Guan-yuan, ZHOU Xing-tai |
84 |
Functional Materials |
Synthesis of hierarchical hollow spherical CdS nanostructures by microwave hydrothermal process |
HU Bao-yun, JING Zhen-zi, HUANG Jian-feng, YUN Jun |
89 |
Controllable synthesis of Zn0.95Co0.05O nanowires and nanotubes by electrophoretic deposition method |
LI Jian-jun,, ZHANG Li-ting, ZHU Jin-bo, LIU Yin, HAO Wei-chang |
95 |
Facile synthesis of NiO nanowires and their gas sensing performance |
ZENG Wen, MIAO Bin, LIN Li-yang, XIE Jin-yue |
100 |
Stability of nanopore formation in aluminum anodization in oxalic acid |
LI Xian-feng, CHEN Dong, CHEN Zhe, WU Yi, WANG Ming-liang, MA Nai-heng, WANG Hao-wei |
105 |
Sol−gel synthesis of Y2O3-doped ZnO thin films varistors and their electrical properties |
XU Dong, JIANG Bin, JIAO Lei, CUI Feng-dan, XU Hong-xing, YANG Yong-tao, YU Ren-hong, CHEN |
110 |
Influence of substrate bias on microstructure and morphology of ZrN thin films deposited by arc ion plating |
ZHANG Min, HU Xiao-gang, YANG Xiao-xu, XU Fei-fei, KIM Kwang-Ho, SHAO Zhi-gang |
115 |
Photocatalytic activities of N doped TiO2 coatings on 316L stainless steel by plasma surface alloying technique |
WANG He-feng, SHU Xue-feng, LI Xiu-yan, TANG Bin |
120 |
Microstructure and electrical properties of sol−gel derived Ni-doped CaCu3Ti4O12 ceramics |
ZHANG Cheng-hua, ZHANG Ke, XU Hong-xing, SONG Qi, YANG Yong-tao, YU Ren-hong, XU Dong,, |
127 |
Structure and piezoelectric properties of (1−x)K0.5Na0.5NbO3−xLiBiO3 lead-free piezoelectric ceramics |
JIANG Min-hong, DENG Man-jiao, YANG Zhu-pei, FU Zhen-xiao |
133 |
Fabrication and characteristics of strontium barium niobate/ barium strontium titanate ceramics by powder−sol method |
SHAN Lian-wei, WANG Feng-chun, WANG Ji-hua, WU Ze, HAN Zhi-dong, DONG Li-min, ZHANG Xian-you |
138 |
Growth interface of In-doped CdMnTe from Te solution with vertical Bridgman method under ACRT technique |
DU Yuan-yuan, JIE Wan-qi, ZHENG Xin, WANG Tao, BAI Xu-xu, YU Hui |
143 |
Determination of trap levels in CZT:In by thermally stimulated current spectroscopy |
NAN Rui-hua, JIE Wan-qi, ZHA Gang-qiang, BAI Xu-xu, WANG Bei, YU Hui |
148 |
Effect of Mg and Co co-doping on electrochemical properties of LiFePO4 |
DING Yan-huai, ZHANG Ping |
153 |
Electrochemical performance of LiVPO4F/C synthesized by different methods |
LIU Jie-qun, ZHONG Sheng-kui, WU Ling, WAN Kang, LÜ, Fan |
157 |
Preparation and characterization of magnetic Fe3O4/CRGO nanocomposites for enzyme immobilization |
WU Xiao-chen, ZHANG Yan, WU Cong-yu, WU Hai-xia |
162 |
Fabrication of hydroxyapatite microspheres with poor crystallinity using a novel flame-drying method |
XIAO Gui-yong, LÜ, Yu-peng, ZHU Rui-fu, XU Wen-hua, JIAO Yan |
169 |
In vitro corrosion resistance and cytotoxicity of novel TiNbTaZr alloy |
GUO Yong-yuan, CHENG Meng-qi, CHEN De-sheng, XUE Xiao-bing, ZHANG Xian-long |
175 |
Development of porous medical implant scaffolds via laser additive manufacturing |
SU Xu-bin, YANG Yong-qiang, YU Peng, SUN Jian-feng |
181 |
Manufacturing, compressive behaviour and elastic modulus of Ti matrix syntactic foam fabricated by powder metallurgy |
XUE Xiao-bing, WANG Li-qiang, WANG Min-min, LÜ, Wei-jie, ZHANG Di |
188 |
Effects of amount of pre-deformation on precipitation of NbC particles and shape memory effect of Fe17Mn5Si8Cr5Ni0.5NbC alloy during electropulsing treatment |
LIU Wen-bo, LI Ning, WEN Yu-hua, ZHANG Shi-chao, YANG Shi-zhou |
193 |
Random dynamic response of crack in functionally graded materials layer for plane problem |
ZHANG Hui-zhan, ZHAO Xiao-hua, ZHANG Jia-zhen, ZHOU Zhen-gong |
198 |