中国有色金属学报(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 22 Special 1 October 2012 |
（National Key Laboratory of Science and Technology on Precision Heat Processing of Metals,
Harbin Institute of Technology, Harbin 150001, China）
Abstract:TiB whiskers reinforced pure Ti (TiBw/Ti) composites with a novel network microstructure were successfully fabricated by reaction hot pressing (RHP). TiB whiskers are in situ synthesized around the large pure Ti matrix particles, and subsequently formed into TiBw network structure. The novel TiBw/Ti composites with a network microstructure exhibit a superior combination of mechanical properties. In order to further improve the mechanical properties and guide the subsequent plastic forming, the rolling deformation behavior of the novel composites was investigated. The results show that the strength of the novel TiBw/Ti composites can be effectively enhanced by rolling deformation due to the matrix deformation strengthening effect, and increased with increasing the rolling reduction. The strength of 8.5%TiBw/Ti (volume fraction) composite is significantly increased from 842 MPa to 1030 MPa by rolling deformation. It is certain that the TiB whiskers are gradually broken with increasing the rolling reduction, which is harmful to the mechanical properties of the composites.
Key words: titanium matrix composites (TMCs); rolling deformation; reaction hot pressing (RHP); network microstructure; tensile properties
