| Structural Materials |
| Microstructural evolution of ultra-high strength Al-Zn-Cu-Mg-Zr alloy containing Sc during homogenization |
LI Wen-bin, PAN Qing-lin, XIAO Yan-ping, HE Yun-bin, LIU Xiao-yan |
2127 |
Production of super-high strength aluminum alloy billets by
low frequency electromagnetic casting |
ZHANG Hai-tao, CUI Jian-zhong |
2134 |
Microstructure and mechanical properties of Mg−Gd−Y−Zr alloy
processed by equal channel angular pressing |
ZHANG Fan, ZHANG Ke-xiang, TAN Cheng-wen,YU Xiao-dong, MA Hong-lei, WANG Fu-chi, CAI Hong-nian |
2140 |
Ternary compounds and solid-state phase equilibria in
Mg-rich side of Mg−Zn−Ca system at 300 °C |
LI Hong-xiao, REN Yu-ping, MA Qian-qian, JIANG Min, QIN Gao-wu |
2147 |
Microstructural refinement and mechanical properties of
direct extruded ZM21 magnesium alloys |
M. THIRUMURUGAN, G. M. THIRUGNASAMBANDAM, S. KUMARAN, T. SRINIVASA RAO |
2154 |
Effects of plastic deformation on precipitation behavior and
tensile fracture behavior of Mg-Gd-Y-Zr alloy |
LIN Dan, WANG Lei, LIU Yang, CUI Jian-zhong, LE Qi-chi |
2160 |
| Effects of heat treatment on microstructure and mechanical properties of Mg−3Sn−1Mn magnesium alloy |
YANG Ming-bo, QIN Cai-yuan, PAN Fu-sheng |
2168 |
Bonding properties of interface in
Fe/Al clad tube prepared by explosive welding |
SUN Xian-jun, TAO Jie, GUO Xun-zhong |
2175 |
Preparation and mechanical properties of in situ Al2O3/Al composites by
adding NH4AlO(OH)HCO3 |
JIANG Lan, CUI Yan-zhou, SHI Yu-juan, DING You-dong, YUAN Fang-lan |
2181 |
| Nucleation and growth of eutectic cell in hypoeutectic Al−Si alloy |
SUN Yu, PANG Shao-ping, LIU Xue-ran, YANG Zi-run, SUN Guo-xiong |
2186 |
| Microstructural evolution of (TiAl)+Nb+W+B alloy |
HUANG Lan, P. K. LIAW, C. T. LIU, LIU Yong, HUANG Jin-song |
2192 |
Microstructure evolution of a new directionally solidified Ni-based
superalloy after long-term aging at 950 °C upto 1 000 h |
HUANG Yan, WANG Lei, LIU Yang, FU Shun-ming, WU Jian-tao, YANPing |
2199 |
Microstructure evolution and thermal expansion of
Cu-Zn alloy after high pressure heat treatment |
CHEN Yan, LIU Lin, WANG Yue-hui, LIU Jian-hua, ZHANG Rui-jun |
2205 |
| Functional Materials |
Microstructure and deposition mechanism of
electrodeposited Cu/liquid microcapsule composite |
XU Xiu-qing, ZHU Li-qun, LI Wei-ping, LIU Hui-cong |
2210 |
Electrodeposition and corrosion behavior of
nanostructured Ni-TiN composite films |
ZHU Xu-bei, CAI Chao, ZHENG Guo-qu, ZHANG Zhao, LI Jin-feng |
2216 |
| Electroless Ni-P plating on Mg-Li alloy by two-step method |
LUO Hong-jie, SONG Bin-na, LIU Yi-han, YAO Guang-chun |
2225 |
Resistance of cavitation erosion of
multimodal WC-12Co coatings sprayed by HVOF |
DING Zhang-xiong, CHEN Wei, WANG Qun |
2231 |
Effect of electrical current on tribological property of
Cu matrix composite reinforced by carbon nanotubes |
XU Wei,HU Rui, LI Jin-shan, FU Heng-zhi |
2237 |
Effect of TiB2 addition on microstructure of
spray-formed Si-30Al composite |
GAN Gui-sheng, ZHANG Lei, BEI Shu-yu, LU Yi, YANG Bin |
2242 |
Preparation and electrochemical performance of
tantalum-doped lithium titanate as anode material for lithium-ion battery |
HU Guo-rong, ZHANG Xin-long, PENG Zhong-dong |
2248 |
| Preparation and photocatalytic activity of BiOCl catalyst |
SHI Zhu-qing, WANG Yan, FAN Cai-mei, WANG Yun-fang, DING Guang-yue |
2254 |
| In-situ Raman observation on crack tips of Vickers indent in PLZT ceramics |
ZHANG Sa, CHENG Xuan, ZHANG Ying |
2259 |
Influence of drawing process parameters on
forming of micro copper tube with straight grooves |
TANG Yong, OU Dong-sheng, WAN Zhen-ping, LU Long-sheng, LIAN Bin |
2264 |
| Computational Materials Science and Numerical Mode |
| First-principles study of phase stability and electronic properties of RhZr |
HU Jie-qiong, PAN Yong, XIE Ming |
2201 |
| Thermodynamic assessment of Co−Cr−W ternary system |
YANG Shu-yu, JIANG Min, LI Hong-xiao, WANG Lei |
2270 |
Semi analytical modeling of springback in
arc bending and effect of forming load |
S. K. PANTHI, N. RAMAKRISHNAN |
2276 |
Inhomogeneity of density and mechanical properties of
A357 aluminum alloy backward extruded in semi-solid state |
DU Zhi-ming, CHEN Gang, CHENG Yuan-sheng, XIE Shui-sheng |
2285 |
Parametric optimization of electrochemical machining of
Al/15% SiCp composites using NSGA-II |
C. SENTHILKUMAR, G. GANESAN, R. KARTHIKEYAN |
2294 |
| Mine Engineering, Metallurgical Engineering, Chemi |
| Leaching kinetics of bastnaesite concentrate in HCl solution |
BIAN Xue, YIN Shao-hua, LUO Yao, WU Wen-yuan |
2206 |
| Fine debismuthizing with calcium, magnesium and antimony |
LU Dian-kun, JIN Zhe-nan, JIANG Kai-xi |
2211 |
| Synthesis of rutile from high titania slag by pyrometallurgical route |
ZHANG Li, LI Guang-qiang, ZHANG Wu |
2217 |
Adsorption of sodium polyacrylate at interface of
dicalcium silicate−sodium aluminate solution |
YU Hai-yan, PAN Xiao-lin, DING Ting-ting, ZHANG Wu, LIU Han, BI Shi-wen |
2223 |
Reaction mechanism of preparation of titanium by
electro-deoxidation in molten salt |
WANG Bin, LIU Kui-ren, CHEN Jian-she |
2227 |
Determination of mercury and nickel by amperometric biosensor prepared with
thermostable lactate dehydrogenase |
&#,brahim TAN, Elif ERHAN, P&#,nar KARAGÖ,Z, Melek Ö,ZKAN |
2232 |
