中国有色金属学报(英文版)
Transactions of Nonferrous Metals Society of China
| Vol. 21 No. 10 October 2011 |
（1. Materials Science and Engineering College, Chongqing University of Technology, Chongqing 400054, China;
2. Key Laboratory of Automobile Components Manufacturing and Testing Technology of the Education Ministry, Chongqing University of Technology, Chongqing 400054, China;
3. National Engineering Research Center for Magnesium Alloys, Chongqing University, Chongqing 400030, China）
Abstract:The effects of heat treatment on the microstructure and mechanical properties of Mg−3Sn−1Mn alloy were preliminarily investigated by using optical and electron microscopy, X-ray diffraction (XRD) analysis, and tensile and creep test. The results indicate that the heat treatment has an obvious effect on the microstructure and mechanical properties of the Mg−3Sn−1Mn alloy. After the solid solution treatment at 420 °C, a majority of the Mg2Sn phases in the alloy are dissolved into the matrix. However, after the further aging treatment at 250 °C, lots of fine Mg2Sn phases in the aged alloy are precipitated at the grain boundaries and within the grains. As a result, the tensile and creep properties of the aged alloy are significantly improved. The mechanism for the higher tensile and creep properties of the aged alloy is related to the dispersive distribution of the Mg2Sn phase in the a-Mg matrix.
Key words: Mg−Sn−Mn alloy; heat treatment; microstructure; mechanical properties
