Deformation behavior of fine-grained 5083 Al alloy at elevated temperature |
ZHANG Kai-feng(张凯锋), YAN Hong-hua(闫宏华) |
307 |
Finite element analysis of stiffness and static dent resistance of aluminum alloy double-curved panel in viscous pressure forming |
LI Yi(李毅), WANG Zhong-Jin(王忠金) |
312 |
Quasi-static-dynamic formability of AA5052-O sheet under uniaxial and plane-strain tension |
LIU Da-hai(刘大海), YU Hai-ping(于海平), LI Chun-feng(李春峰) |
318 |
Grain refining and property improvement of AZ31 Mg alloy by hot rolling |
MIAO Qing(苗青), HU Lian-xi(胡连喜), SUN Hong-fei(孙宏飞), WANG Er-de(王尔德) |
326 |
Effects of solution treatment and aging process on microstructure refining of semi-solid slurry of wrought aluminum alloy 7A09 |
WU Xin(吴欣), HAN Fei(韩飞), WANG Wei-wei(王卫卫) |
331 |
Effect of heat treatment on mechanical properties of
thixoformed 7A09 aluminum alloy |
WANG Wei-wei(王卫卫), JIA Bin-bin(贾彬彬), LUO Shou-jing(罗守靖) |
337 |
Microstructural evolution of spray-formed Al-11.5Zn-2.0Mg-1.6Cu alloy during hot-extrusion and heat-treatment |
GUO Shu(郭舒), NING Zhi-liang(宁志良), CAO Fu-yang(曹福洋), SUN Jian-fei(孙剑飞) |
343 |
Mechanical properties and texture evolution during
hot rolling of AZ31 magnesium alloy |
SUN Hong-fei(孙宏飞), LIANG Shu-jin(梁书锦), WANG Er-de(王尔德) |
349 |
Effect of Al and Zn additives on grain size of Mg-3Ni-2MnO2 alloy |
FANG Wa(房娃), SUN Hong-fei(孙宏飞), FANG Wen-bin(房文斌), WANG Bin(王彬) |
355 |
Fabrication and microstructure of nanostructured Mg-3Ni-2MnO2 by
ball milling in hydrogen atmosphere |
FANG Wen-bin(房文斌), FANG Wa(房娃), SUN Hong-fei(孙宏飞), YU Zhen-xing(于振兴) |
359 |
Hydriding and microstructure nanocrystallization of ZK60 Mg alloy by reaction milling in hydrogen |
YUAN Yuan(袁媛), WANG Heng(王珩), HU Lian-xi(胡连喜), SUN Hong-fei(孙宏飞), FANG Wen-bin(房文斌) |
363 |
Mechanical behaviour of Al/Al2O3 composite in
pseudo-semi-solid state during isothermal compression |
CHENG Yuan-sheng(程远胜), LUO Shou-jing(罗守靖) |
368 |
Effects of extrusion deformation on mechanical properties of
sub-micron Si3N4p/2024 composite |
XIU Zi-yang(修子扬), CHEN Guo-qin(陈国钦), LIU Yan-mei(刘艳梅),YANG Wen-shu(杨文澍), WU Gao-hui(武高辉) |
373 |
Microstructure and thermal conductivity of
submicron Si3N4 reinforced 2024Al composite |
YANG Wen-shu(杨文澍), XIU Zi-yang(修子扬), CHEN Guo-qin(陈国钦), WU Gao-hui(武高辉) |
378 |
Nonlinear temperature characteristic of thermal expansion of
Grf/Mg composites |
SONG Mei-hui (宋美慧), XIU Zi-yang(修子扬), WU Gao-hui(武高辉), CHEN Guo-qin(陈国钦) |
382 |
Optimization of processing parameters for preparation of
Al-3Ti-1B grain refiner |
LI Bao(李豹), WANG Hong-wei(王宏伟), ZHAO Rui-feng(赵瑞峰), WEI Zun-jie(魏尊杰) |
387 |
Influence of processing parameters on coating surface roughness of
aluminum alloy |
PAN Ming-qiang(潘明强), CHI Guan-xin(迟关心), WEI Dong-bo(韦东波), DI Shi-chun(狄士春) |
392 |
Hydroforming of AZ61A tubular component with various cross sections |
TANG Ze-jun(汤泽军), HE Zhu-bin(何祝斌), LIU Gang(刘钢) YUAN Shi-jian(苑世剑), HU Lan(胡蓝) |
398 |
Effects of hydrogenation on ambient deformation behaviors of Ti-45Al alloy |
SU Yan-qing(苏彦庆), LIU Xin-wang(刘鑫旺), ZHAO Long(赵龙), WANG Liang(王亮), GUO Jing-jie(郭景杰), FU Heng-zhi(傅恒志) |
403 |
Effect of electropulsing on anisotropy behaviour of cold-rolled commercially pure titanium sheet |
WANG Zhong-jin(王忠金), SONG Hui(宋辉) |
409 |
Microstructure and mechanical properties of Ti6Al4V/Cu-10Sn bronze diffusion-bonded joint |
ZHAO He(赵贺), CAO Jian(曹健), FENG Ji-cai(冯吉才) |
414 |
Superplastic forming of Ti6Al4V alloy using ZrO2-TiO2 ceramic die with adjustable linear thermal expansion coefficient |
JIANG Shao-song(蒋少松), ZHANG Kai-feng(张凯峰) |
418 |
Effect of hydrogen content and stress state on
room-temperature mechanical properties of Ti-6Al-4V alloy |
YUAN Bao-guo(袁宝国), LI Chun-feng(李春峰), YU Hai-ping(于海平), SUN Dong-li(孙东立) |
423 |
Superplastic formability of Ti-6Al-4V butt-welded plate by
laser beam welding |
WANG Gang(王刚), ZHANG Wen-cong(张文丛), ZHANG Gong-lei(张功磊), XU Zhi-liang(徐志良) |
429 |
Micro electrical discharge machining of small hole in TC4 alloy |
LI Mao-sheng(李茂盛), CHI Guan-xin(迟关心), WANG Zhen-long(王振龙), WANG Yu-kui(王玉魁), DAI Li(戴立) |
434 |
Microstructure evolution of as-cast Nb-Ti-C alloys |
WEI Wen-qing(魏文庆), WANG Hong-wei(王宏伟), GAO Zeng-xin(高增新), WEI Zun-jie(魏尊杰) |
440 |
Properties of vacuum cast CuCr25 and CuCr25Te contact material |
XIU Shi-xin(修士新), YANG Ren(杨韧), XUE Jun(薛军), WANG Jin-xing(汪金星) |
444 |
Fabrication and thermo-physical properties of
TiB2p/Cu composites for electronic packaging applications |
CHENGuo-qin(陈国钦), XIU Zi-yang(修子扬), MENG Song-he(孟松鹤),WU Gao-hui(武高辉), ZHU De-zhi(朱德志) |
448 |
Effect of extrusion ratio on coating extrusion of Pb-GF composite wire by numerical simulation and experimental investigation |
WANG Xin(王欣), SUN Hong-fei(孙宏飞), FANG Wen-bin(房文斌) |
453 |
Multiscale simulation and nanoindentation experimental study of
initial plasticity of Fe single crystal |
YUAN Lin(袁林), SHAN De-bin(单德彬), GUO Bin(郭斌) |
458 |
Influence of processing parameters and heat treatment on phase composition and microstructure of plasma sprayed hydroxyapatite coatings |
ZHAO Guo-liang(赵国亮), WEN Guang-wu(温广武), WU Kun(吴昆) |
463 |
Influence of voids on interlaminar shear strength of
carbon/epoxy fabric laminates |
ZHU Hong-yan(朱洪艳), LI Di-hong(李地红), ZHANG Dong-xing(张东兴),WU Bao-chang(吴宝昌), CHEN Yu-yong(陈玉勇) |
470 |
Effect of preparation conditions on selective oxidation of
propane to acrylic acid |
YU Zhen-xing(于振兴), ZHENG Wei(郑伟), XU Wen-long(徐文龙),ZHANG Yu-hang(张宇航), FU Hong-ying(付红英), ZHANG Ping(张平) |
476 |
a novel one-step method to synthesize copper nitrate hydroxide nanorings |
Wang Xin-bo(王新波), Huang Long-nan(黄龙男) |
480 |
Flow field simulation of double layer atomizer |
ZHAO Wen-jun(赵文军), CAO Fu-yang(曹福洋), NING Zhi-liang(宁志良), SUN Jian-fei(孙剑飞) |
485 |
Factors governing heat affected zone during wire bonding |
SUN Li-ning(孙立宁), LIU Yue-tao(刘曰涛), LIU Yan-jie(刘延杰) |
490 |
Temperature and stress fields of multi-track laser cladding |
ZHAO Hong-yun (赵洪运), ZHANG Hong-tao(张洪涛), XU Chun-hua(徐春华), YANG Xian-qun(杨贤群) |
495 |
An evaluation analysis method for corrosion morphology characterization based on Gaussian filter |
ZHANG Peng (张鹏), GUO Bin (郭斌), CHENG Shu-kang (程树康) |
502 |
Effect of thickness and grain size on material behavior in micro-bending |
SHAN De-bin(单德彬), WANG Chun-ju(王春举), GUO Bin(郭斌), WANG Xin-wei(汪鑫伟) |
507 |
Effects of specimen size on flow stress of micro rod specimen |
WANG Chun-ju(王春举), GUO Bin(郭斌), SHAN De-bin(单德彬), SUN Li-ning(孙立宁) |
511 |
Flow stress and tribology size effects in scaled down cylinder compression |
GUO Bin(郭斌), GONG Feng(龚峰), WANG Chun-ju(王春举), SHAN De-bin(单德彬) |
516 |
Micro precision casting based on investment casting for
micro structures with high aspect ratio |
YANG Chuang(杨闯), LI Bang-sheng(李邦盛), REN Ming-xing(任明星), FU Heng-zhi(傅恒志) |
521 |
Surface finish of micro punch with ion beam irradiation |
XU Jie(徐杰), WANG Chun-ju(王春举), GUO Bin(郭斌),SHAN De-bin(单德彬), Y. SUGIYAMA, S. ONO |
526 |