Materials Science and Engineering |
Effect of deformation processing on microstructure evolution and mechanical properties of Mg-Li alloys: A review |
Zhan LIU, Jin-feng NIE, Yong-hao ZHAO |
1 |
Recent progress in NiMo-based amorphous alloys for electrocatalytic hydrogen evolution reaction |
Si-xuan ZHANG, Jin-zhao HUANG, Dian-jin DING, Jun TANG, Xiao-long DENG |
26 |
Reinforcing effects of nano-WC in AlSi10Mg alloy assisted by in-situ surface modification approach |
Jiang-long YI, Han-lin LIAO, Cheng CHANG, Xing-chen YAN, Min LIU, Ke-song ZHOU |
50 |
Mechanical properties and microstructural evolution of 5052 aluminum alloys by multi-pass stretching and induced electro-pulsing treatment |
Shi-peng WANG, Xiao-hui CUI, Ang XIAO, Zhuo-xing YU, Zhi-hao DU |
65 |
Effect of ultrasonic vibration on microstructures and mechanical properties of friction stir welded 2195 Al-Li alloy |
Xiang DAI, Lei SHI, Chun-yan TIAN, Chuan-song WU, Song GAO |
80 |
Effect of heat treatment on microstructure and mechanical property of roll-bonded 1060/7N01/1060 laminates |
Shun-qiang LI, Guo-sheng SUN, Rui-sheng ZHANG, Xiao CHENG, Ji-zi LIU |
94 |
Microstructure, mechanical and tribological properties of APC/Al laminated composites prepared by hydrothermal carbon adsorption on plates |
Yi-han CHEN, Hong-yu XU, Bo JIANG, Ye WANG, Mao-liang HU, Ze-sheng JI |
108 |
Corrosion behavior of Al/Mg/Al multilayered composite elaborated by accumulated roll bonding |
Ismail BENCHERIFA, Khadidja ABIB, Khereddine ABDEL YAZID, Baya ALILI, Djamal BRADAI |
122 |
Discharge channel structure revealed by plasma electrolytic oxidation of AZ31Mg alloy with magnetron sputtering Al layer and corrosion behaviors of treated alloy |
Pan-feng HU, Bing-jian WEI, Yu-lin CHENG, Ying-liang CHENG |
139 |
Superior corrosion resistance and thermal/electro properties of graphene-epoxy composite coating on Mg alloy with biomimetic interface and orientation |
Pu-sheng SUI, Cheng-bao LIU, Ai-meng ZHANG, Cong SUN, Lan-yue CUI, Rong-chang ZENG |
157 |
In-situ preparation of high oxygen content titanium via wire arc additive manufacturing with tunable mechanical properties |
Chang-yuan LI, Chang-meng LIU, Tao LU, Yue-ling GUO, Bin LIU |
171 |
Residual stresses in linear friction welding of TC17 titanium alloy considering phase fraction |
Peng HE, Yun-xin WU, Tao ZHANG, Song-yi CHEN, Chen ZHANG |
184 |
Collaborative optimization of microstructure, phase composition and room-temperature fracture toughness of Nb-Si based alloys using Ti, Zr and Hf elements |
Qi WANG, Tian-yu ZHAO, Rui-run CHEN, Xiao-wei WANG, QinXU, Shu WANG, Heng-zhi FU |
194 |
High-temperature oxidation behaviors and mechanical properties of TiAlCrMn HEAs during heat treatment |
Ping-hu CHEN, Bai-chun LI, Zhen LIU, Ying-hao ZHOU, Rui-qing LI, Yun ZHANG |
203 |
Mechanical and corrosion properties of lightweight (Ti60Cr30Nb10)100-xAlx medium-entropy alloys |
Hao WANG, Wei-ping CHEN, Liang-yan HAO, Chen-liang CHU, Wei XIONG, Zhi-qiang FU |
219 |
Strengthening behavior and thermal conductivity of Cu/Al composite with penetration architecture |
Xiao-ling CHEN, Zhi-qing CHEN, Bo HU, Long YAN, Jing-ya WANG, Tao YING, Xiao-qin ZENG |
236 |
Interfacial structures and their effect on thermal conductivity and mechanical properties of diamond/Cu-B composites |
Zhong-nan XIE, Hong GUO, Wei XIAO, Xi-min ZHANG, Shu-hui HUANG, Ming-mei SUN, Hao-feng XIE |
246 |
Mechanical and energy absorption properties of multilayered ultra-light sandwich panels produced by 3D-printing and electroforming |
Mehrnoosh HOSSEINPOUR, Salar ROHANI NEJAD, Seyed Mohammad Hossein MIRBAGHERI |
255 |
Mining, Minerals Processing and Metallurgical Engineering |
Non-explosive mechanized and intelligent mining/heading in underground mine |
Shao-feng WANG, Yu-meng WU, Xin-lei SHI |
265 |
Advancements on chemical-biological dissolution mechanism and leaching kinetics of chalcocite |
Chao-jun FANG, Jun WANG, Guan-zhou QIU |
283 |
Selective flotation separation of molybdenite and chalcopyrite using O3 oxidation method |
Hong-tao ZHANG, Xiang-yu SONG, Ye-hao HUANG, Zhen ZHANG, Wen WANG, Lai-fu XU |
298 |
Precise control and continuous production of β-ammonium tetramolybdate in concentric reactor |
Jiang-tao LI, Yong-jin LUO, Zhi-chao LI, Zhong-wei ZHAO, Xu-heng LIU, Xing-yu CHEN, Li-hua HE, Feng-long SUN, Ning ZHANG |
309 |
Thiourea leaching of gold in presence of jarosite and role of oxalate |
Ke LI, Qian LI, Tao JIANG, Yong-bin YANG, Bin XU, Rui XU, Yan ZHANG |
322 |
Recovery of Li and Fe from spent lithium iron phosphate using organic acid leaching system |
Ya-hui WANG, Ji-jun WU, Guo-chen HU, Wen-hui MA |
336 |
Melting and separation behaviors of electric arc furnace dust pellets under iron bath conditions |
Chao YANG, Xue-feng SHE, Ru-yi WANG, Jing-song WANG, Qing-guo XUE |
347 |