Structural Materials |
Microstructures and mechanical properties of high-strength Mg-Gd-Y-Zn-Zr alloy |
WANG Zhen-dong, FANG Can-feng, MENG Ling-gang, LI Nai-pu, WU You-fang, ZHANG Xing-guo |
1 |
Microstructure evolution of
semisolid AZ31 magnesium alloy during reheating process |
CAO Fu-rong, GUAN Ren-guo, CHEN Li-qing, ZHAO Zhan-yong, REN Yong |
7 |
Growing process and formation mechanism of manganese phosphate conversion film of magnesium alloy AZ31 |
CUI Xue-jun, ZHOU Ji-xue, LIN Xiu-zhou, LUO Hong, GONG Min |
15 |
Effect of cooling channel on AM60 Mg alloy semi-solid slurry
prepared by self-inoculation method (Ⅲ) |
LI Yuan-dong, XING Bo, MA Ying, HAO Yuan |
22 |
Semi-solid rheocasting and performance of Al-6.5%Mg alloy |
WANG Guo-wei, WU Rui-zhi |
33 |
Fabrication and corrosion properties of
Mg-6%Zn-10%(β-Ca3(PO4)2) composite |
CHEN Fu-wen, YU Kun, CHEN Liang-jian, PEI Sai-min, WANG Rui-fang, LI Shao-jun, HU Ya-nan |
39 |
Friction and lubrication performances of magnesium alloy sheet in numerically controlled hot incremental forming |
FENG Tian-tian, ZHANG Qing-lai, XIAO Fu-gui, HAN Yin-ben, GAO Lin, HAN Wei-dong |
45 |
Influence of extrusion and heat treatment on microstructure and mechanical properties of ZM61 magnesium alloys |
ZHANG Ding-fei, ZHAO Xia-bing, SHI Guo-liang, QI Fu-gang |
53 |
Friction-stir welded defects and repairing weld process of
thick aluminum plates with telescopic stir-pin |
LI Bo, SHEN Yi-fu, HU Wei-ye |
62 |
Flow stress behavior of delta-processed
Inconel 718 superalloy under hot compression deformation |
YANG Ping, ZHAO Yu-tao, WANG An-dong, MIAO Dong, CHEN Gang, HE Yi |
72 |
Hot deformation mechanism and process optimization for
ZnAl10Cu2 alloy based on Murty criterion |
WU Xiao-ping, LI De-fu, GUO Sheng-li, XU Xiao-qing, HU Jie, HE Jin-yu |
80 |
Lightweight design and crash performance analysis of
automotive aluminum bumper |
WANG Guan, ZHOU Jia, LIU Zhi-wen, LI Luo-xing, LIU Bo, LI Xiao-qing, LIU Yang-sheng |
90 |
Torsional fretting friction and wear behaviors of
titanium and its alloy |
HE Li-ping, LIN Xiu-zhou, CAI Zhen-bing, ZHANG Qiang, ZHU Min-hao |
99 |
Corrosion behavior of Cu-17Ni-3Al-X alloy in neutral salt atmosphere |
LUO Zong-qiang, ZHANG Wei-wen, XIN Bao-liang, LI Yuan-yuan |
106 |
Preparation, performance and structure of
high tenacious Mo-0.1Zr alloy |
CHENG Hui-chao, FAN Jing-lian, LU Ming-yuan, LI Peng-fei, TIAN Jia-min |
114 |
Preparation of semi-solid A356 Al alloy slurry by
repeated heating-cooling method with elliptical-twisted tubes |
LIU Wen, XIE Shui-sheng, JIA Zhi-xin, LI Ji-qiang, WU Hong-bing |
121 |
Functional Materials |
Research progress of one-dimensional metal nanomaterials |
WANG Chao, HE Yue-hui, PENG Chao-qun, LIU Xin-li, ZHANG Quan |
128 |
Performance of LiCoO2-LiFePO4 cathode materials for
lithium ion batteries |
TANG Xiao-hui, LI Guo-xi, GAO Gui-hong, HU Jin-feng, LIANG Guo-biao |
139 |
Fabrication and characterization of
Li1.3Al0.3Ti1.7(PO4)3 based Li-ion conductive materials |
LIU Yu-long, ZHANG Hong, XUE Dan, CUI Bin, LI Zhi-cheng |
144 |
Effects of Bi doping on electrochemical corrosion and
dendrite growth suppression of lead-free Sn-3.0Ag-0.5Cu solder |
HUA Li, GUO Xing-peng, YANG Jia-kuan |
150 |
Fabrication and properties of ultrafine Ti powder by
NaCl coated/hydrogenation-dehydrogenation combined method |
HE Wei, JIANG Yao, DU Yong, YUAN Tie-chui, HE Yue-hui |
158 |
Near full sintering densification behavior of
activated high density tungsten powder at low temperature |
HAN Yong, FAN Jing-lian, LI Tao, CHENG Hui-chao, TIAN Jia-min |
165 |
Character of ZrC film prepared by transporting solid ZrCl4 during
low pressure chemical vapor deposition |
LIU Gang, LI Guo-dong, XIONG Xiang, WANG Ya-lei, CHEN Zhao-ke, SUN Wei |
171 |
Synthesis and performance of Li3V2(PO4)3/C with
different organic-water mixed solvents |
TANG Yan, GUO Xiao-dong, NIE Xiang, ZHONG Yan-jun, ZHONG Ben-he, LIU Heng, WEN Jia-jie |
179 |
Electrochemical impedance spectra of
Al-Zn-Sn-Ga anode during corrosion process |
HE Jun-guang, WEN Jiu-ba, LI Xu-dong, HAO Qing-guo |
187 |
Fretting fatigue fractographies of
aluminum conductor steel reinforced overhead conductor |
WANG Xu, CHEN Guo-hong, WANG Jia-qing, ZHANG Jian-kun,ZHANG Tao, XU Guang-qing, TANG Wen-ming |
194 |
Numerical simulation of mechanical properties in
nano-/micro-crystalline Cu |
FENG Guang-hai, DU Zhong-ze, YAN Dun, WANG Jing-tao |
201 |
Computational Materials Scien |
Microscopic phase-field simulation for formation of
pre-precipitation phase in Ni75Al25−xMnx alloy |
ZHUO Chang-yan, WANG Yong-xin, CHEN Zheng, WANG Xiao-peng |
208 |
Effects of transitional metal on electronic structure and
thermodynamic stability of Mg2Ni hydride:
A first-principle investigation |
CHEN Jie-shi, ZENG Han, WANG Lu, LAN Zhi-qiang, GUO Jin |
216 |
Model of solidification characteristics of
Cu-Al alloy modified by electric pulse |
QI Jin-gang, DAI Shan, ZHAO Zuo-fu, ZHANG Dong-jun, WANG Jian-zhong, CANG Da-qiang |
224 |
Laser lap welding structural properties and first-principle
computation of zinc-coated steel and 6016 aluminum alloy |
PENG Li, ZHOU Dian-wu, XU Shao-hua, PENG Ping, LIU Jin-shui |
230 |
Mine En |
Voxel model and its magnetic forward model of
stereoscopic prediction of concealed ore body |
FAN Jun-chang, MAO Xian-cheng, ZHAO Ying, TANG Yan-hua, SHAN Wen-fa, CHEN Jin |
239 |
Accessory minerals formed during magmatic-hydrothermal
transition of Baishitouquan amazonite granite, Eastern Tianshan |
SHAO Yi, ZHANG Zun-zhong, WU Chang-zhi, XIAO E,GU Lian-xing, LIU Jian-xin, CAO Chuang-hua, |
251 |
Effect of heat treatment on structure transformation and
activities of kaolinite |
KUANG Jing-zhong, QIU Ting-sheng, SHI Fang |
258 |
Progress in sulfur speciation transformation during
chalcopyrite bioleaching |
LIANG Chang-li, XIA Jin-lan, YANG Yi, NIE Zhen-yuan, QIU Guan-zhou |
265 |
Reduction roasting-magnetic separation mechanisms of
nickelferous laterite ore in presence of sodium salts |
LI Guang-hui, RAO Ming-jun, JIANG Tao, SHI Tang-ming, HUANG Qing-qing |
274 |
Effect of surface property of
main minerals in red mud on their sedimentation ability |
LI Xiao-bin, ZHAO Dong-feng, ZHANG Xuan, LIU Gui-hua, PENG Zhi-hong, ZHOU Qiu-sheng |
281 |
Hydraulic simulation of slag splashing in nickel converter |
MA De-gang, CHEN Wei-qing, CHE Xiao-mei |
287 |
Leaching of silver and lead by chloride simultaneously from
residue after zinc extraction of low-grade zinc oxide ores |
ZHANG Ya-li, YU Xian-jin, LI Xiao-bin |
296 |
Recovery of copper and cobalt from low-grade heterogenite
with reductive acid leaching method |
LIU Jun, LI Lin-yan, XU Sheng-ming, CHI Ru-an |
304 |
Thermodynamic analysis of Bi2S3-ZnO-Na2CO3 and its application |
LIU Xiao-wen, YANG Jian-guang, LI Jing, CHEN Yong-ming, SUN Ya-hui, TANG Mong-tang |
310 |
Influences of mechanical activation on dissolution kinetics and physicochemical properties of indium-bearing zinc ferrite |
ZHANG Yan-juan, LI Xuan-hai, PAN Liu-ping, WEI Yan-song |
315 |
Effects of ammonium adipate on sulphuric acid anodizing of 7075-T6 aluminum alloy |
LIU Jian-hua, LI Yong-xing, YU Mei, LI Song-mei, SUN Yu-jing |
324 |