(1.鞍山钢铁学院化学工程研究中心，鞍山114002；
2.北京科技大学冶金部腐蚀-脚损与表面技术开放研究实验室，北京100083)
摘 要: 在自行研制的腐蚀磨损试验机上，研究了腐蚀学因素对化学镀Ni-P合金腐蚀磨损行为的影响。结果表明，当NaCl浓度为3. 5%时，化学镀Ni-P合金的腐蚀磨损速率、摩擦系数和腐蚀磨损协同作用率具有峰值特性。Nacl浓度升高将引起Ni-P合金的自腐蚀电位负移，温度升高将引起Ni-P合金的腐蚀磨损速率增大，协同作用率上升。化学镀Ni-P合金可以作为G105钢在NaCl溶液中抵抗腐蚀磨损的表面改性材料。
关键字: 氯化钠 化学镀 Ni-P合金 腐蚀磨损 协同作用
（1.Chemical Engineering Research Center，Anshan Institute of Iron and Steel Technology,Anshan 114002;
2.Bei jing University of Science and Technology,Beijing 100083）
Abstract:The effect of corrosion factors on the corrosive wear behaviours of electroless Ni-P coating in NaCl solution was studied using a device made by authors. The results showed that electroless Ni-P coating had better of wear than G105 steel,and the main loss forms were the pure mechanical wear and the synergy between corrosion and wear.
Key words: electroless plating Ni-P coating corrosive wear synergy NaCl solution
