Transactions of Nonferrous Metals Society of China The Chinese Journal of Nonferrous Metals

您目前所在的位置:首页 - 期刊简介 - 详细页面

中国有色金属学报

ZHONGGUO YOUSEJINSHU XUEBAO

第8卷    第4期    总第29期    1998年12月

[PDF全文下载]        

    

文章编号:(1998)04-590-5
注射成形高比重合金的性能与显微组织
范景莲    黄伯云    曲选辉    邱光汉    李益民

(中南工业大学粉末冶金国家重点实验室, 长沙 410083)

摘 要:    含钨量较高的W-Ni-Fe高比重合金具有高的密度、强度等优异性能,适合用作动能穿甲弹以及防辐射屏蔽材料; 而粉末注射成形技术(PIM)在生产小而形状复杂与性能良好的零件方面具有很大的潜在优势。研究了95W-3.5Ni-1.5Fe高比重合金的注射成形工艺,讨论了其烧结工艺与性能的关系,并与采用传统粉末冶金(PIM)法制造的合金性能与显微组织进行了比较。结果表明,采用注射成形所生产的合金,性能更高,硬度分布和显微组织结构更均匀。

 

关键字:     注射成形    高比重合金    性能     显微组织

PROPERTIES AND MICROSTRUCTURE OF TUNGSTEN HEAVY ALLOY BY INJECTION MOLDING
Fan Jinlian, Huang Baiyun, Qu Xuanhui, Qiu Guanghan and Li Yiming

State Key Laboratory for Powder Metallurgy, Central South University of Technology, Changsha 410083, P. R. China

Abstract:W-Ni-Fe heavy alloy with higher content of tungsten has a series of good properties, such as high density, high strength and so on. It is applicable to be used as penetrors, armor-piercing bullets, and radiation shielders. Powder injection molding (PIM) has a potential advantage in manufacturing small parts with complex shape. The injection process of 95W-3.5Ni-1.5Fe samples molding was investigated, and the sintering process and the dependence of properties on microstructures were discussed. Compared with traditional powder metallurgy (PM), the properies of this kind of alloy made by PIM is higher, the distribution of hardness and microstructure are uniform.

 

Key words: tungsten heavy alloy    powder injection molding     property    microstucture

ISSN 1004-0609
CN 43-1238/TG
CODEN: ZYJXFK

ISSN 1003-6326
CN 43-1239/TG
CODEN: TNMCEW

主管:中国科学技术协会 主办:中国有色金属学会 承办:中南大学
湘ICP备09001153号 版权所有:《中国有色金属学报》编辑部
------------------------------------------------------------------------------------------
地 址:湖南省长沙市岳麓山中南大学内 邮编:410083
电 话:0731-88876765,88877197,88830410   传真:0731-88877197   电子邮箱:f_ysxb@163.com