Transactions of Nonferrous Metals Society of China The Chinese Journal of Nonferrous Metals

您目前所在的位置:首页 - 期刊简介 - 详细页面

中国有色金属学报

ZHONGGUO YOUSEJINSHU XUEBAO

第12卷    第6期    总第51期    2002年12月

[PDF全文下载]        

    

文章编号:1004-0609(2002)06-1290-04
铝酸钠溶液种分首槽温度控制预报
准理论模型的应用
肖忠良, 陈启元, 张平民, 尹周澜, 陈金清

(中南大学 化学化工学院, 长沙 410083)

摘 要: 应用铝酸钠溶液种分首槽温度控制预报准理论模型, 结合实际生产情况, 在原模型参数的基础上将晶种表面积改设为变量, 并考虑到反馈比这一重要工艺参数的作用,引入小于45μm粒子质量分数和二次成核生成的临界粒径的晶核粒径分布值之间的关系,应用线性回归原理, 求出修正后的模型参数, 根据现场生产数据, 对首槽控制温度进行预测, 其结果与稳定生产的首槽控制温度及经验模型(X模型)的预测结果基本一致。 以C++Builder为开发平台, 成功开发了基于该原理的、运行于Windows系统的应用软件, 使用效果良好。

 

关键字: 砂状氧化铝; 温度控制; 准理论模型

Prediction of first trough temperature with sub-theory model in sandy alumina production
XIAO Zhong-liang, CHEN Qi-yuan, ZHANG Ping-min, 
YIN Zhou-lan, CHEN Jin-qing

College of Chemistry and Chemical Engineering,
Central South University, Changsha 410083, China

Abstract: According to the practice of sandy alumina production, the surface area of seed is a variable, which is considered to be a constant in the original sub-theory model for the prediction of the first trough temperature. Due to the importance of the Al(OH)3 seed and feedback ratio, a quantitative relation between mass fraction of Al(OH)3 seed whose diameter is less than 45μm, and the distribution frequency is introduced. The model parameters can be obtained by using statistics regression. A software developed with C++ Builder about on-time calculation of the model parameters and the prediction of the first-trough temperature is proved to be reliably available in practice.

 

Key words:  sandy alumina; temperature control; sub-theory model

ISSN 1004-0609
CN 43-1238/TG
CODEN: ZYJXFK

ISSN 1003-6326
CN 43-1239/TG
CODEN: TNMCEW

主管:中国科学技术协会 主办:中国有色金属学会 承办:中南大学
湘ICP备09001153号 版权所有:《中国有色金属学报》编辑部
------------------------------------------------------------------------------------------
地 址:湖南省长沙市岳麓山中南大学内 邮编:410083
电 话:0731-88876765,88877197,88830410   传真:0731-88877197   电子邮箱:f_ysxb@163.com