Materials Science and Engineering |
Lightweight metal laminated plates produced via (hot, cold and cryogenic) roll bonding: A review |
Hai-tao GAO, Charlie KONG, Hai-liang YU |
337 |
Tensile property and microstructure of Al-4.77Mn-1.37Mg-0.67Sc-0.25Zr alloy under different selective laser melting processing parameters |
Yi LAI, Ying DENG, Xin-wen ZHU, Yi-fan GUO, Guo-fu XU, Ji-wu HUANG, Zhi-min YIN |
357 |
New powder metallurgy preparation method of homogeneous and isomeric Al-Cu-Mg mixed crystal materials |
Tao YU, Feng LI, Ye WANG, Xue-wen LI |
371 |
Preparation of high performance 5083 aluminum alloy by alternate ring-groove pressing and torsion |
Yong-fei GU, Wei-peng LIU, Hao-shan GUO, Chun-xiang ZHANG, Jun-ting LUO |
383 |
Effect of Ca and rotation speed on microstructure and solidification parameters of AZ91 magnesium alloy produced by semi-solid casting through rotating container process |
Saeed G. SHABESTARI, Ehsan GHANIABADI |
396 |
Enhancing mechanical properties and degradation performance of Mg-0.8wt.%Ca alloy by directional solidification |
YiZHANG, Xiao-huiFENG, Qiu-yanHUANG, Ying-ju LI, Yuan-shengYANG |
409 |
Microstructure evolution, strengthening mechanisms and deformation behavior of high-ductility Mg-3Zn-1Y-1Mn alloy at different extrusion temperatures |
Xiao-feng WU, Chun-xiang XU, Zheng-wei ZHANG, Wen-fu YANG, Jing-shan ZHANG |
422 |
Constitutive relationship and characterization of fracture behavior for WE43 alloy under various stress states |
Peng-fei WU, Chong ZHANG, Yan-shan LOU, Qiang CHEN, Hai-qing NING |
438 |
Effect of volume fraction of 18R-LPSO phase on corrosion resistance of Mg-Zn-Y alloys |
Guo-qiang XI, Yu MOU, Yan-long MA, Xu-han ZHAO, Ju XIONG, Kai MA, Jing-feng WANG |
454 |
Creep behavior and microstructure evolution of titanium matrix composites reinforced with TiB, TiC and Y2O3 |
Li-juan XU, Yun-fei ZHENG, Zhen-quan LIANG, Shi-wei HAN, Xiang XUE, Shu-long XIAO, Jing TIAN, Yu-yong CHEN |
467 |
Thermo-physical simulation of deformation behavior and microstructure evolution for linear friction welding of near-β titanium alloy |
Zhen-guo GUO, Tie-jun MA, Xia-wei YANG, Wen-ya LI, Jun TAO, Ju LI, Achilleas VAIRIS |
481 |
Surface, mechanical, and in vitro corrosion properties of arc-deposited TiAlN ceramic coating on biomedical Ti6Al4V alloy |
Mohamed HUSSEIN, Madhan KUMAR, Nestor ANKAH, Ahmed ABDELAAL |
494 |
Anomalous eutectic formation in undercooled Ni-P eutectic alloy |
Wei LI, Xiu-xun WEI, Jin-fu LI |
507 |
Prediction of elastic properties of face-centered cubic high-entropy alloys by machine learning |
Shen WANG, Da LI, Jun XIONG |
518 |
Oxygen stabilized W-Ag films for environmental antibacterial applications |
Tao FU, Li-jun WANG, Ying-jie WANG, Dong-zhen CHEN, Po-wan SHUM |
531 |
Redox-mediated in-situ fabrication of nanoparticle-packed porous Ag films with excellent surface-enhanced Raman scattering performance |
Hao LEI, Yan LI, Meng-wei GUO, Qi-bo ZHANG |
539 |
High-frequent pulsing ablation of C/C-SiC-ZrB2-ZrC composite for different cycles to 2000 times in plasma |
Wei FENG, Yan ZHANG, Lei LIU, Bo-yan LI, Jia-ping ZHANG, Xi CHEN, Zi-bo HE, Cheng-wei TANG, Hai-jun ZHANG, Qin-xin HAN |
553 |
Mining, Minerals Processing and Metallurgical Engineering |
Mechanism and kinetics for chlorination roasting of copper smelting slag |
Bei-kai ZHANG, Qin-meng WANG, Xue-yi GUO, Qing-hua TIAN |
563 |
Improvement of utilization efficiency of magnesite by (NH4)2SO4 roasting–water leaching process |
Xiao-yi SHEN, Yan-xiang HUANG, Hong-mei SHAO, Yan LIU, Hui-min GU, Yu-chun ZHAI |
576 |
Efficient preparation of magnesium bicarbonate from magnesium sulfate solution and saponification-extraction for rare earth separation |
Meng WANG, Xiao-wei HUANG, Chao XIA, Zong-yu FENG, Yang XU, De-liang MENG, Xin-lin PENG |
584 |
Selective reduction separation and recovery of tellurium and bismuth from acidic leaching solution |
Li-xiong SHAO, Jiang DIAO, Rui-xin HU, Cheng-qing JI, Wen-feng TAN, Hong-yi LI, Bing XIE |
596 |
Behavior and mechanism of cyanide loss in ultrasound-assisted gold leaching process |
Qi LI, Feng XIE, Yong-feng CHANG, Wei WANG, Li-bo ZHANG |
609 |
Leaching kinetics of de-lithium residue from spent ternary lithium-ion battery cathodic materials with starch as reductant |
Wei-lun LI, Yong-ming CHEN, Shuai LI, Chang-hong WANG, Yun LI, Tian-yu ZHAO, Michael TRAVERSY, Cong CHANG, Ya-fei JIE, Jing HE, Chao-bo TANG, Sheng-hai YANG |
619 |
Effect of electric field on leaching valuable metals from spent lithium-ion batteries |
Jian YANG, Yuan ZHOU, Zong-liang ZHANG, Kai-hua XU, Kun ZHANG, Yan-qing LAI, Liang-xing JIANG |
632 |
Dose-dependent impact of compost on rhizosphere bacterial community in heavy metal-contaminated paddy soil |
Ting XIONG, Jia-wen CUI, Long-bo JIANG, Han WANG, Yi-fu LI, Chang-qing SU, Yan-rong CHEN, Xu-yang CAO, Xing-zhong YUAN,Guo-dong YI |
642 |