| Materials Science and Engineering |
| A review of refractory high-entropy alloys |
Yu-sheng TIAN, Wen-zhe ZHOU, Qing-biao TAN, Ming-xu WU, Shen QIAO, Guo-liang ZHU, An-ping DONG, Da SHU, Bao-de SUN |
3487 |
| Effect of solution treatment time on plasticity and ductile fracture of 7075 aluminum alloy sheet in hot stamping process |
Hui-cheng GENG, Yi-lin WANG, Bin ZHU, Zi-jian WANG, Yi-sheng ZHANG |
3516 |
| Role of yttrium content in twinning behavior of extruded Mg-Y sheets under tension/compression |
Yan-qin CHAI, Dong-di YIN, Shen HUA, Guang-hao HUANG, Hao ZHOU, Jiang ZHENG, Qu-dong WANG |
3534 |
| Effects of pre-compression on formation of dynamic precipitates and creep anisotropy of hot-extruded AZ91-2Y magnesium alloy |
Wei LI, Huang HUANG, Wei-ying HUANG, Jian CHEN, Sheng-de ZHANG, Zhen-yu XIAO, Wei QIU |
3550 |
| Influence of free-end torsion on compressive behavior of extruded AZ31 rod at various temperatures |
Fan WU, Meng WANG, Zhi-wen DU, Ruo-lan SHI, Qi SHANG, Ting-ting LIU, Ning GUO, Sheng-feng GUO, Bo SONG |
3563 |
| Microstructure and mechanical behavior of Ti-Cu alloys produced by semisolid processing |
Kaio NIITSU CAMPO, Caio Chaussê de FREITAS, éder Sócrates Najar LOPES, Suk-Chun MOON, Rian DIPPENAAR, Rubens CARAM |
3578 |
| Diffusion bonding of Ti-6Al-4V titanium alloy powder and solid by hot isostatic pressing |
Yi XIAO, Li-hui LANG, Wen-cai XU, De-xin ZHANG |
3587 |
| Effect of bias voltage on microstructure, mechanical and tribological properties of TiAlN coatings |
Hong-shuai CAO, Fu-jia LIU, Hao LI, Wen-zhong LUO, Fu-gang QI, Li-wei LU, Nie ZHAO, Xiao-ping OUYANG |
3596 |
| Microstructure and mechanical properties evolution of 65Cu–35Zn brass tube during cyclic rotating-bending process |
Zi-cheng ZHANG, Tsuyoshi FURUSHIMA, Ken-ichi MANABE |
3610 |
| Microstructure and mechanical properties of Cu/Al joints brazed using (Cu, Ni, Zr, Er)-modified Al-Si filler alloys |
Hua-xin LI, Ying-dian FENG, Wei-jian SHEN, Chuan-yang Lü, Wen-jian ZHENG, Ying-he MA, Gang MA, Zhong-ping JIN, Yan-ming HE, Jian-guo YANG |
3623 |
| Microstructure, formation mechanism and properties of plasma-sprayed Cr7C3-CrSi2-Al2O3 coatings |
Yu-duo MA, Pei-wen RU, Lei WANG, Yong YANG, Peng-yue GAO, Yan-wei WANG, Yu-hang CUI, Wen-wei SUN, Xing-yu WANG, Liang WANG |
3635 |
| Micromorphology and texture of niobium coating electrodeposited in NaCl-KCl-CsCl molten salt system |
Shuang-peng HU, Shu-xin BAI, Li-an ZHU, Yi-cong YE, Zhen WANG, Shun LI, Yu TANG |
3650 |
| Improving electrochemical performance of Ni-rich layered oxide cathodes via one-step dual modification strategy |
Yuan-lin CAO, Xiu-kang YANG, Lu WANG, Ling XIAO, Ni FU, Li ZOU, Wen-bo MA, Zhe-ting LIU, Xiao-qin WANG, Li LIU, Hong-bo SHU, Xian-you WANG |
3663 |
| Lithium-ion diffusion path of tetragonal tungsten bronze (TTB) phase Nb18W16O93 |
Chao SHEN, Sai-nan JIANG, Cui-min DING, Wei-shun XUE, Ke-yu XIE |
3679 |
| Molecular dynamics analysis on bending mechanical behavior of alumina nanowires at different loading rates |
Yuxiao James HE, Bin MA |
3687 |
| Mining, Minerals Processing and Metallurgical Engineering |
| Failure modes and slabbing mechanisms of hard rock with different height-to-width ratios under uniaxial compression |
Yu-zhe ZHAO, Lin-qi HUANG, Xi-bing LI, Chong-jin LI, Zheng-hong CHEN, Zhi-wei CAO |
3699 |
| Dynamic compressive strength and failure mechanisms of microwave damaged sandstone subjected to intermediate loading rate |
Pin WANG, Tu-bing YIN, Xi-bing LI, Heinz KONIETZKY |
3714 |
| Interaction mechanism of ferrate(VI) with arsenopyrite surface and its effect on flotation separation of chalcopyrite from arsenopyrite |
Run-peng LIAO, Pan-jin HU, Shu-ming WEN, Yong-xing ZHENG, Xian-hui QIU, Jin-fang Lü, Jian LIU |
3731 |
| Galvanic effect of magnetite on electrochemical oxidation of arsenopyrite in acidic culture medium |
Sha DENG, Guo-hua GU, Tao LONG, Wei XIAO, Wei YANG |
3744 |
| Coordination configurations of cupric tartrate in electronic industry wastewater |
Ming-jun HAN, Jian-yong HE, Wei SUN, Sai LI, Heng YU, Tong YUE, Xin WEI, Chen-yang ZHANG |
3753 |
| Suspension roasting process of vanadium-bearing stone coal: Characterization, kinetics and thermodynamics |
Shuai YUAN, Yong-hong QIN, Yong-peng JIN, Yan-jun LI |
3767 |
| Separation and recovery of Ni from copper electrolyte by crystallization of nickel ammonium sulfate double salt |
Yi WANG, BiaoLIU, Xue-wen WANG, Yu-qi MENG, Xing-ming WANG, Ming-yu WANG |
3780 |
| Molten salt electrosynthesis of silicon carbide nanoparticles and their photoluminescence property |
Zhong-ya PANG, Xiang LI, Xue-qiang ZHANG, Jin-jian LI, Shu-juan WANG, Xiao-lu XIONG, Guang-shi LI, Qian XU, Zhong-fu ZHOU, Xing-li ZOU, Xiong-gang LU |
3790 |
| One-step production of high-strength titanium alloy by sintering titanium hydride powder from upgraded titania slag |
Zhao-wang DONG, Yang XIA, Xue-yi GUO, Qing-hua TIAN, Han-ning LIU, Pei-dong LIU, Yu-bing CHEN |
3801 |
| An environmentally benign and sustainable process for carbon recovery and efficient defluorination of spent carbon cathode |
Yi-fan LI, Hao CHENG, Pei-yu GONG, Kai YANG, Zhong-liang TIAN, Yan-qing LAI |
3810 |
| Life cycle assessment for waste acid treatment in zinc smelting |
Ying-yan HU, Min LI, Wei-guo WU, Yong KE, Lu-jing LIU, Xue-liang WANG |
3822 |
