Materials Science and Engineering |
Prediction of hot tearing susceptibility of direct chill casting of AA6111 alloys via finite element simulations |
Dong-xu CHEN, Rui-feng DOU, Jia-qiang HAN, Jun-sheng WANG |
3161 |
Microstructure and mechanical properties of 7075 aluminum alloy during complex thixoextrusion |
Jian LIU, Yuan-sheng CHENG, Sin Wing Norman CHAN, Daniel SUNG |
3173 |
Microstructure and mechanical properties of AlCuFe eutectic alloy |
Sevda ENG?N |
3183 |
Fatigue strength and microstructure evaluation of Al 7050 alloy wires recycled by spray forming, extrusion and rotary swaging |
Jo?o G. J. de SALVO, Conrado R. M. AFONSO |
3195 |
Microstructure and mechanical properties of ADC12 composites reinforced with graphene nanoplates prepared by ultrasonic assisted casting |
Jun-jie XIONG, Hong YAN |
3210 |
Combined powder metallurgy routes to improve thermal and mechanical response of Al-Sn composite phase change materials |
Chiara CONFALONIERI, Maxime PERRIN, Elisabetta GARIBOLDI |
3226 |
Effect of brazing parameters on fillet size and microstructure of cladded fin-microchannel tube joints |
J. C. GUíA-TELLO, M. I. PECH-CANUL, E. TRUJILLO-VáZQUEZ, M. A. PECH-CANUL |
3240 |
Microstructure and tensile properties of rapid-cooling friction-stir-welded AZ31B Mg alloy along thickness direction |
Nan XU, Wei-da ZHANG, Si-qi CAI, Yue ZHUO, Qi-ning SONG, Ye-feng BAO |
3254 |
Influence of multipass high rotating speed friction stir processing on microstructure evolution, corrosion behavior and mechanical properties of stirred zone on AZ31 alloy |
Fen-jun LIU, Yan JI, Yan-xia BAI |
3263 |
Microstructure and properties of Ti64.51Fe26.40Zr5.86Sn2.93Y0.30 biomedical alloy fabricated by laser additive manufacturing |
Li-ying HAN,Cun-shan WANG |
3274 |
δ-phase precipitation regularity of cold-rolled fine-grained GH4169 alloy plate and its effect on mechanical properties |
Hao XUE, Jing-qi ZHAO, Yong-kang LIU, Chun-xiang ZHANG, Jun-ting LUO |
3287 |
Effects of doping route on microstructure and mechanical properties of W-1.0wt.%La2O3 alloys |
Jun-jun YANG, Gang CHEN, Zheng CHEN, Xiao-dong MU, Ying YU, Lin ZHANG, Xing-yu LI, Xuan-hui QU, Ming-li QIN |
3296 |
Microstructure and compression properties of fine Al2O3 particles dispersion strengthened molybdenum alloy |
Tie-long SUN, Liu-jie XU, Shi-zhong WEI, Kun-ming PAN, Wu-hui LI, Yu-cheng ZHOU, Zhi-min HUANG |
3307 |
Comparison of Cu-Al-Ni-Mn-Zr shape memory alloy prepared by selective laser melting and conventional powder metallurgy |
Dennis GERA, Jonadabe SANTOS, Cláudio S. KIMINAMI, Piter GARGARELLA |
3322 |
Preparation of NaYF4:Yb3+,Tm3+@NaGdF4:Ce3+,Eu3+ double-jacket microtubes for dual-mode fluorescent anti-counterfeiting |
Yin CHEN, Shao-wen XIE, Chao TONG, Hai-hu TAN, Li-jian XU, Na LI, Jian-xiong XU |
3333 |
A simple physical mixing method for MnO2/MnO nanocomposites with superior Zn2+ storage performance |
Xiao-bei ZANG, Ling-tong LI, Zhi-xin SUN, Rabah BOUKHERROUB, Jia-xin MENG, Kun-peng CAI, Qing-guo SHAO, Ning CAO |
3347 |
Mining, Minerals Processing and Metallurgical Engineering |
New correction method for controlled-source electromagnetics source effects |
Bo YUAN, Di-quan LI, Yan-fang HU |
3356 |
Recovery of zinc and lead from Yahyali non-sulphide flotation tailing by sequential acidic and sodium hydroxide leaching in the presence of potassium sodium tartrate |
Sait KURSUNOGLU,Soner TOP, Muammer KAYA |
3367 |
Stability constants of Sb5+ with Cl- and thermodynamics of Sb-S-Cl-H2O system involving complex behavior of Sb with Cl |
Gang LI, Yun-tao XIN, Xiao-dong Lü, Qing-hua TIAN, Kang YAN, Long-gang YE |
3379 |
Effects of electrolysis process parameters on alumina dissolution and their optimization |
Wen-yuan HOU, He-song LI, Mao LI, Ben-jun CHENG, Yuan FENG |
3390 |
Numerical simulation and experimental verification of axial-directional crystallization purification process for high-purity gallium |
You-dong DING, Lan JIANG, Zi-shen LI, Gao-feng FU, Liang YU |
3404 |
Optimization of microwave heating thickness for spent automobile catalyst |
Guang-jun HE, Peng LIU, Wen-wen QU, Shi-xing WANG, Li-bo ZHANG |
3417 |