Structural Materials |
Effect of heat treatment on microstructure and mechanical properties on TIG welded ZM6 magnesium alloy |
ZHANG Tie-lei, JI Ze-sheng, ZHAO Zhen-hua |
593 |
Effects of self-inoculation technological parameters on semi-solid microstructure of ZA96 magnesium alloy and interactive nature |
LI Chun, LI Yuan-dong, MA Ying, CHEN Ti-jun, WU Hui-hui, LI Yan-lei |
599 |
Effect of atomic bonding of interface of β′ phase on property of Al-Mg-Si alloy |
HUANG Chuang-gao, HUANG Li-lin, YUAN Long-le, DENG Qian-qian, GAO Ying-jun |
610 |
Microstructure and mechanical properties of high strength and toughness die casting Al-Mg-Si-Mn alloys |
HU Zu-qi, WAN Li, WU Han, LIU Xue-qiang, ZOU Guang, WU Shu-sen |
616 |
Effect of pre-straining and pre-ageing on bake hardening response of Al-Mg-Si alloy |
XU Huan-huan, ZHANG Zhi-qing, WU Sai-nan, HUANG Guang-jie |
623 |
Influence of second phase on corrosion behavior of Al-Zn-Sn-Ga-Mg alloy |
HE Jun-guang, WEN Jiu-ba, ZHOU Xu-dong |
628 |
Non-dendritic microstructure evolution process and mechanism of ZA74 magnesium alloy |
FENG Kai, HUANG Xiao-feng, MA Ying, YAN Feng-yun, HAO Yuan |
635 |
Effect of aging on corrosion resistance of 7050 aluminum alloy pre-stretching plate |
SONG Feng-xuan, ZHANG Xin-ming, LIU Sheng-dan, HAN Nian-mei, HUA Long |
645 |
Effects of phosphorus additives on tribological performance of 7050 aluminum alloy |
HUANG Wei-jiu, YU Yong-mei, ZHANG Xiao-bin, TANG Li-wen |
652 |
Dynamic flow stress characteristics and constitutive model of aluminum 7075-T651 |
WU Yong-fu, LI Shu-hui, HOU Bo, YU Zhong-qi |
658 |
Effect of minor Sc on quench sensitivity of 7085 aluminum alloy |
QI Xiao-hong, DENG Yun-lai, LIU Sheng-dan, ZHANG Yun-ya, ZHANG Xin-ming |
666 |
Effect of parameters of two dimensional vibration on microstructures of semi-solid ZL104 alloy |
TAN Jian-bo, ZHANG Hai-ying, LI Zeng-min, LI Li-xin |
673 |
Effect of solution and aging treatment on microstructure and properties of QAl9-4-3 aluminum bronze |
LIN Gao-yong, WANG Li, XU Xiu-zhi, ZENG Ju-hua |
679 |
Microscopic phase-field simulation of formation and motion of ordered domain boundaries in B2-FeAl intermetallic compound |
WU Lin, CHEN Zheng, ZHUANG Hou-chuan, HUANG Yong-bing, YANG Tao |
687 |
Structures and properties of aluminum matrix composite reinforced by primary Si and Si/Mg2Si particles fabricated by centrifugal casting |
LIN Xue-dong, LIU Chang-ming, Lü Xun-jia, HAO Xu-hong |
695 |
Performance and microstructure of 90W-Ni-Fe high-density tungsten alloy fabricated by vacuum sintering |
ZOU Jian-peng, ZHANG Zhao-sen |
703 |
Microstructural evolution mechanism of rapidly solidified ternary Fe62.5Cu27.5Sn10 alloy |
XIA Zhen-chao, WANG Wei-li, ZHAI Wei, LI Zhi-qiang, WEI Bing-bo |
711 |
Thermodynamic analysis of cerium inclusion formed in spring steel used in fastener of high-speed railway |
LIU Yan-qiang, WANG Li-jun, GUO Jun-bo, HU Xiao-jun, CHOU Kuo-chih |
720 |
Functional Materials |
Effect of glucose on properties of anodizing film on AZ31B magnesium alloy |
TU Xiao-hua, CHEN Li, WU Jian-yi |
727 |
Preparation of 3D spherical Mg(OH)2 by self-assembled monolayers method |
YUAN Qiu-hua, LUO Xiong-biao, ZHANG Pei-xin, LU Zheng-wu, REN Xiang-zhong, ZHANG Dong-yun |
735 |
Corrosion behavior of copper and brass in serious Xisha marine atmosphere |
CUI Zhong-yu, XIAO Kui, DONG Chao-fang, DING Yuan, WANG Tao, LI Xiao-gang |
742 |
Strengthening mechanism and hot deformation behavior of 20%Mo/Cu-Al2O3 composite |
LIU Yong, SUN Yong-wei, TIAN Bao-hong, FENG Jiang, ZHANG Yi |
750 |
Influence of cold rolling reduction and annealing temperature on texture and properties of Ni47Ti44Nb9 plate |
FENG Zhao-wei, MI Xu-jun, WANG Jiang-bo, YUAN Zhi-shan, MIAO Wei-dong, ZHOU Jin |
756 |
Effect of diamond powder on Ni electrocrystallization behavior at initial stages |
Wang Mei-juan, Wang Ri-chu, Peng Chao-qun, Feng Yan, Zhang Chun |
765 |
Preparation and characterization of Fe-C-TiO2 |
TANG Jian-jun, ZOU Yuan, LI Shao-feng |
773 |
Interface and properties of SiCp/ZL101 matrix composites |
YUAN Man, YU Jia-kang, CHEN Dai-gang, YU Wei, LI Hua-lun, CAO Lu-hua |
779 |
First-principles study on structural stability and dehydrogenation thermodynamics of MgH2 surface |
ZHANG Jian, HUA Man-yu, MAO Cong, LONG Chun-guang, ZHOU Dian-wu |
786 |
Hydrothermal synthesis and photocatalytic properties of La-doped BiVO4 microspheres |
LIU Guo-cong, JING Zhen, ZHANG Xi-bing, LI Xian-feng, LIU Hong |
793 |
Effect of coating thickness on thermal conductivity of Ti-coated diamond/Al composites |
CHEN Dai-gang, YU Jia-kang, YU Wei, YUAN Man |
802 |
Corrosion behavior of hot air solder level finished printed circuit board in mold environment |
ZOU Shi-wen, XIAO Kui, DONG Chao-fang, LI Hui-yan, LI Xiao-gang |
809 |
Forming mechanism of diffusion couple of Al/Sn interphase diffusion solution layer |
MA Hui-yu, ZHU Pei-xian, ZHOU Sheng-gang, HAN Chao-hui |
816 |
Mine Engineering, Metallurgical Engineering, Chemistry and Chemical Engineering |
Adsorption-collecting function of Rhodococcus erythropolis on hematite and quartz |
YANG Hui-fen, TANG Qiong-yao, WANG Chuan-long, ZHANG Lu, LI Tian |
822 |
Reaction behavior of pyrite during Bayer digestion at high temperature |
LI Xiao-bin, LI Chong-yang, QI Tian-gui, ZHOU Qiu-sheng, LIU Gui-hua, PENG Zhi-hong |
829 |
Plotting and application of predominance area diagram of Pb-S-O system based on topological rules |
YAO Teng-meng, TAN Jun, LIU Chang-qing, LI Jie, CHEN Qi-yuan,WANG Hui, LIAO Zhou, ZHANG Ping-ming |
836 |
Dehydration mechanism and reduction process dynamics of laterite nickel ore |
ZHANG Jian-liang, MAO Rui, HUANG Dong-hua, SHAO Jiu-gang, LI Feng-guang |
843 |
First-principles study on Fe-S co-doped anatase TiO2 |
WU Guo-hao, ZHENG Shu-kai, LIU Lei |
852 |
Quantum chemical study of adsorption of hydroxyl and hydroxyl calcium on pyrite (100) surface bearing vacancy defects |
CHEN Jian-hua, LI Yu-qiong, ZHONG Shui-ping, GUO Jin |
859 |
Research progress in carbothermal reduction of solid alumina |
FENG Yue-bin, YANG Bin, DAI Yong-nian |
866 |
Enrichment of tantalum and niobium from tungsten residue by hydrochloric acid method |
YANG Xiu-li, WANG Xiao-hui, XIANG Shi-biao, SUN Qing, WEI Chang, ZHENG Shi-li |
873 |
Influence of glycerin concentration on plasma electrolytic saturation process of stainless steel surface |
XUE Wen-bin, JIN Qian, LIU Run, JIN Xiao-yue, WANG Bin, DU Jian-cheng |
882 |