| Materials Science and Engineering |
| Through-thickness inhomogeneity of precipitate distribution and pitting corrosion behavior of Al-Li alloy thick plate |
Kuo ZHAO, Jian-hua LIU, Mei YU, Song-mei LI |
1793 |
| Influence of dynamic recrystallization on microstructure and mechanical properties of welding zone in Al-Mg-Si aluminum profile during porthole die extrusion |
Shi-kang LI, Luo-xing LI, Hong HE, Zhi-wen LIU, Long ZHANG |
1803 |
| Microstructure evolution of Al-Cu-Mg alloy during rapid cold punching and recrystallization annealing |
Ze-yi HU, Cai-he FAN, Dong-sheng ZHENG, Wen-liang LIU, Xi-hong CHEN |
1816 |
| Effect of tool tilt angle on strength and microstructural characteristics of friction stir welded lap joints of AA2014-T6 aluminum alloy |
C. RAJENDRAN, K. SRINIVASAN, V. BALASUBRAMANIAN, H. BALAJI, P. SELVARAJ |
1824 |
| Influence of anodic oxide film structure on adhesive bonding performance of 5754 aluminum alloy |
Ying-dong LI, Pi-zhi ZHAO, Ying-juan FENG, Hai-long CAO |
1836 |
| Effects of solution treatment on high temperature deformation behavior of extruded Mg-0.35Y-2.17Nd-0.36Zr biomedical alloy |
Sh. ALIYARI, S. M. FATEMI, S. M. MIRESMAEILI |
1842 |
| Microstructures and mechanical properties of Ni-coated SiC particles reinforced AZ61 alloy composites |
Su-qing GUO, Ri-chu WANG, Chao-qun PENG, Zhi-yong CAI, Cui-ge DONG |
1854 |
| Microstructure and mechanical properties of TIG/A-TIG welded AZ61/ZK60 magnesium alloy joints |
Bo QIN, Fu-cheng YIN, Cheng-zong ZENG, Jia-cheng XIE, Jun SHEN |
1864 |
| Mechanism of reheat cracking in electron beam welded Ti2AlNb alloys |
Yan-jun LI, Ai-ping WU, Quan LI, Yue ZHAO, Rui-can ZHU, Guo-qing WANG |
1873 |
| Crack propagation behavior of inhomogeneous laminated Ti-Nb metal-metal composite |
Wen-juan CHENG, Yong LIU, Da-peng ZHAO, Bin LIU, Yan-ni TAN, Xiao-gang WANG, Han-chun TANG |
1882 |
| Fabrication, microstructure, friction and wear properties of SiC3D/Al brake disc-graphite/SiC pad tribo-couple for high-speed train |
Lan JIANG, Yan-li JIANG, Liang YU, Hong-liang YANG, Zi-shen LI, You-dong DING, Gao-feng FU |
1889 |
| Reciprocating sliding tribology of brake oil treated carbon fiber reinforced ceramic matrix composites |
Parshant KUMAR, Vijay Kumar SRIVASTAVA |
1903 |
| Mining, Minerals Processing and Metallurgical Engineering |
| Non-explosive mining and waste utilization for achieving green mining in underground hard rock mine in China |
Shao-feng WANG, Li-cheng SUN, Lin-qi HUANG, Xi-bing LI, Ying SHI, Jin-rui YAO, Shao-lun DU |
1914 |
| Multi-scale impact crushing characteristics of polymetallic sulphide ores |
Wen-tao ZHOU, Yue-xin HAN, Yong-sheng SUN, Jin-lin YANG, Shao-jian MA |
1929 |
| Adsorption mechanism of sodium oleate and styryl phosphonic acid on rutile and amphibole surfaces |
Wei XIAO, Ya-xin REN, Juan YANG, Pan CAO, Jun WANG, Wen-qing QIN, Guan-zhou QIU |
1939 |
| Decomposition kinetics of zircon sand in NaOH sub-molten salt solution |
Hong-qian SUN, Jing SONG, Shuai SUN, Jing-kui QU, Wei Lü, Tao QI |
1948 |
| Germanium transport across supported liquid membrane with Cyanex 923: Mathematical modeling |
Hossein KAMRAN HAGHIGHI, Mehdi IRANNAJAD, Ana MARIA SASTRE |
1956 |
| Process and anodic reaction mechanism of cadmium electrically enhanced cementation on zinc plate under an ultrasonic field in ammoniacal system |
Tian-xiang NAN, Jian-guang YANG, Wen-chao WANG, Ling-chen LI, Jian-ying YANG |
1967 |
| Local corrosion mechanism of SiO2-based refractories caused by slag movement near solid–liquid–gas interface in different slag systems |
Zhang-fu YUAN, Shan-shan XIE, Xiang-tao YU, Yan-gang ZHANG, Rong-yue WANG |
1975 |
| Stabilization of ferric arsenate sludge with mechanochemically prepared FeS2/Fe composites |
Xiao-bo MIN, Tian-yu PENG, Yang-wen-jun LI, Yong KE, Yan-jie LIANG, Xing-yu HE |
1983 |
