Materials Science and Engineering |
First principle study of AlB2, TiB2 and TiAl3 in Al-Ti-B alloy |
HUANG Yuan-chun, SHAO Hong-bang, XIAO Zheng-bing, REN Xian-wei, GUO Xiao-fang |
1491 |
Interface and hardness of piston aluminum alloy prepared by compound casting |
ZHOU Xiang, CHEN Gang, ZHAO Yu-tao, ZHANG Zhen-ya, XU Jin-kang |
1499 |
Growth characteristics of ZL114A alloy eutectic silicon under synergistic field between ultrasonic vibration and vacuum counter-pressure |
YAN Qing-song, YANG Pu-chao, LU Gang, WANG Qing, DUAN Yong-biao |
1507 |
Effects of isothermal heat treatment on semi-solid microstructural evolution of Mg-7Zn-0.3V alloy |
HUANG Xiao-feng, GUO Feng, ZHANG Yu, YANG Jian-chang, MA Ya-jie, ZHANG Qiao-qiao |
1516 |
Constitutive equation and processing map of hot deformation for pre-twin AQ80 magnesium alloy |
YIN Zhen-ru, LU Li-wei, LIU Xiao-ye, SHENG Kun, LIU Chu-ming |
1523 |
Effect of minor Mn addition on non-dendritic microstructure evolution of Mg-6Zn-3Al magnesium alloy |
ZHANG Yu, HUANG Xiao-feng, GUO Feng, YANG Jian-chang, MA Ying, HAO Yuan |
1532 |
Comparison of effects of V2O5 and NaVO3 on corrosion resistance of micro-arc oxidation coatings on magnesium alloys |
AN Ling-yun, MA Ying, LIU Yun-po,WANG Yu-shun, WANG Sheng, WANG Zhan-ying |
1542 |
Cross rolling of large strain on microstructure and texture characteristic of Al-9Mg-1.8Li alloy sheet |
FAN Cai-he, ZENG Guang-sheng, CHEN Xi-hong, OU Ling, YANG Jian-jun, PENG Ying-biao |
1551 |
Precipitation behavior and mechanical properties of TG700A alloy during aging |
XU Qing-shuang, CAO Tie-shan, XU Fang-hong, FANG Xu-dong, CHENG Cong-qian, ZHAO Jie |
1559 |
Selective laser melting fabrication and cracking behavior of Rene104 nickel-based superalloy |
DUAN Ran-xi, HUANG Bai-yun, LIU Zu-ming, PENG Kai, Lü Xue-qian |
1568 |
Multi-direction temperature field of Inconel 740 nickel based alloy in laser engineered net shaping |
YANG Wei, CHEN Zhi-guo, WANG Li, WANG Yi-peng, WEI Xiang |
1579 |
Effect mechanism of plasma assisted ball milling on synthesis of ultrafine AlN from Al+C4H4N4 |
YANG Zhuo-li, LIAO Hai-feng, SUN Di, DAI Le-yang, LIU Zhi-jie, WANG Wen-chun |
1587 |
Magnetic properties and magnetocaloric effects in MnCo0.95Cu0.05Ge alloy |
GAO Tian, QI Ning-ning, SUN Chao, WU Mei, LIU Yong-sheng, XU Yan, ZHOU Tao |
1597 |
Preparation and properties of FeCoCu pre-alloyed powder precursors |
XIE De-long, LIN Feng, FANG Xiao-hu, QIN Hai-qing, PAN Xiao-yi, CHEN Chao, XIAO Le-yin |
1603 |
Preparation and high temperature mechanical properties of open-cell Ni-Cr-Fe alloy foams |
Pang Qiu, Hu Zhi-li, Sun Dong-li |
1609 |
Cellular decomposition of as-cast U-5.5Nb alloy |
CHEN Dong, DENG Hong-zhang, TANG Qing-fu, WANG Zhen-hong, SU Bin, ZHANG Xin-jian, MENG Da-qiao |
1623 |
Mine Engineering, Metallurgical Engineering, Chemistry and Chemical Engineering |
Evolution law of yield stress in paste tailings |
ZHANG Lian-fu, WU Ai-xiang, WANG Hong-jiang, CHENG Hai-yong, WANG Yi-ming |
1631 |
Remove impurity from high arsenic-content copper electrolyte by cyclone electrowinning technology |
TIAN Qing-hua, ZHANG Zhen, LI Xiao-jing, LI Dong, GUO Xue-yi |
1637 |
Effect and mechanism of co-depressant of calcite and sodium hexametaphosphate on scheelite flotation |
WANG Ji-zhen, YIN Wan-zhong, SUN Zhong-mei |
1645 |
Separation and extraction of Cr2O2- 7from chromic slags using [Omin][BF4] as extractant |
WEI Jun-yi, LI Yong, XUE Xiang-xin |
1653 |
Separation and recovery process of tellurium and bismuth from precipitating platinum and palladium solution |
ZHANG Lin-bao, ZHENG Ya-jie, AN Xiao-kai |
1660 |
Reduction characteristic of garnieritic laterite ore using hydrogen at low temperature |
DING Zhi-guang, LI Bo, WEI Yong-gang |
1669 |
Preparation of composite magnetic flocculant and its application in treatment of butyl xanthate wastewater |
PENG Ying-lin, YU Wang, ZHENG Ya-jie, LI Chang-hong |
1676 |
Leaching behavior and leaching kinetics of zinc from zinc-bearing dust |
ZHANG Jin-xia, ZOU Xuan, NIU Fu-sheng |
1688 |
Progress in valuable metal element recovery and utilization of red mud—A review |
WANG Lu, HAO Yan-zhong, HAO Zeng-fa |
1697 |