Structural Materials |
Effect of three-step homogenization on microstructure and properties of 7N01 aluminum alloys |
Hua-qiang LIN,, Ling-ying YE, Lin SUN, Tao XIAO, Sheng-dan LIU, Yun-lai DENG,, Xin-ming ZHANG, |
829 |
Influence of different solution methods on microstructure, precipitation behavior and mechanical properties of Al-Mg-Si alloy |
Guan-jun GAO, Chen HE, Yong LI, Jia-dong LI, Zhao-dong WANG, R. D. K. MISRA |
839 |
Nonmechanical criteria proposed for prediction of hot tearing sensitivity in 2024 aluminum alloy |
M. H. GHONCHEH, S. G. SHABESTARI, A. ASGARI, M. KARIMZADEH |
848 |
Quantitative analysis of orange peel during tension of 6063 alloy spun tubes |
Yang CAI, Xiao-song WANG,, Shi-jian YUAN, |
858 |
Microstructure and wear performance of Al5083/CeO2/SiC mono and hybrid surface composites fabricated by friction stir processing |
M. AMRA, Khalil RANJBAR, S. A. HOSSEINI |
866 |
Solidification behavior of 6061 wrought aluminum alloy during rheo-diecasting process with self-inoculation method |
Ming LI, Yuan-dong LI,, Hong-qiang ZHENG, Xiao-feng HUANG,, Ti-jun CHEN,, Ying MA, |
879 |
Effects of secondary phases on texture and mechanical properties of as-extruded Mg-Zn-Er alloys |
Ke LIU, Jin-xue LIU, Shu-bo LI, Zhao-hui WANG, Wen-bo DU, Qing-feng WANG |
890 |
Tensile behaviors of fatigued AZ31 magnesium alloy |
Yang SHU, Xi-yan ZHANG, Jiang-ping YU, Li TAN, Rui-sen YIN, Qing LIU |
896 |
Influence of rolling route on microstructure and mechanical properties of AZ31 magnesium alloy during asymmetric reduction rolling |
Ru MA, Yue LU, Ling WANG, Yi-nong WANG |
902 |
Effect of predeformation on globularization of Ti-5Al-2Sn-2Zr-4Mo-4Cr during annealing |
Lian LI, Miao-quan LI |
912 |
Influences of gap size and cyclic-thermal-shock treatment on mechanical properties of TLP bonded IN-738LC superalloy |
Vahid MALEKI, Hamid OMIDVAR, Mohammad-Reza RAHIMIPOUR |
920 |
Functional Materials |
Effect of thermomechanical processing on microstructure and mechanical properties of CoCrFeNiMn high entropy alloy |
Jian-xin FU, Cheng-ming CAO, Wei TONG, Liang-ming PENG |
931 |
Microstructure evolution of Al0.6CoCrFeNi high entropy alloy powder prepared by high pressure gas atomization |
Shang-cheng ZHOU, Peng ZHANG, Yun-fei XUE,, Fu-chi WANG,, Lu WANG,, Tang-qing CAO, Zhen TAN, Bao-yuan CHENG, Ben-peng WANG |
939 |
Tribological behavior of self lubricating Cu/MoS2 composites fabricated by powder metallurgy |
Mohammad MOAZAMI-GOUDARZI, Aram NEMATI |
946 |
Microstructure, sintering behavior and mechanical properties of SiC/MoSi2 composites by spark plasma sintering |
Xin-xin HAN, Ya-lei WANG, Xiang XIONG, Heng LI, Zhao-ke CHEN, Wei SUN |
957 |
Elastic modulus of nanocrystalline cemented carbide |
Xue-mei LIU, Hai-bin WANG, Xiao-yan SONG, Riccardo MOSCATELLI |
966 |
Green synthesis of Ag nanoparticles: Effect of algae life cycle on Ag nanoparticle production and long-term stability |
Oksana VELGOSOVA, Anna MRA?íKOVá, Elena ?I?MáROVá, Jaroslav MáLEK |
974 |
Structure and denitration performance of carbon-based catalysts prepared from Cu-BTC precursor |
Li ZHANG, Lei HUANG, Yi-hong QIN, Bai-zhen CHEN |
980 |
Computational Materials Science and Numerical Modelling |
Computation of synthetic surface heat transfer coefficient of 7B50 ultra-high-strength aluminum alloy during spray quenching |
Lei KANG, Gang ZHAO, Ni TIAN, Hai-tao ZHANG |
989 |
Effect of clad ratio on interfacial microstructure and properties of cladding billets via direct-chill casting process |
Hai-tao ZHANG, Xing HAN, Dong-tao WANG, Bo SHAO, Ke QIN, Jian-zhong CUI |
998 |
Numerical simulation for macrosegregation in direct-chill casting of 2024 aluminum alloy with an extended continuum mixture model |
Hai-jun LUO, Wan-qi JIE, Zhi-ming GAO, Yong-jian ZHENG |
1007 |
Mining, Mineral Processing, and Metallurgical Engineering |
Thermal dehydration kinetic mechanism of Mn1.8Co0.1Mg0.1P2O7?2H2O using Málek’s equations and thermodynamic functions determination |
Chuchai SRONSRI |
1016 |
Separation of arsenic and antimony from dust with high content of arsenic by a selective sulfidation roasting process using sulfur |
Cheng TAN, Lei LI, Da-peng ZHONG, Hua WANG, Kong-zhai LI |
1027 |
A new mixed-valent iron arsenate black crystal |
Jin-qin YANG, Qing-zhu LI,, Li-yuan CHAI,, Qing-wei WANG,, Hui LIU,, Xiao-bo MIN,, Rui-yang XIAO, |
1036 |
Preparation of sodium manganate from low-grade pyrolusite by alkaline predesilication-fluidized roasting technique |
Xiang-yi DENG, Ya-li FENG, Hao-ran LI, Zhu-wei DU, Jin-xing KANG, Cheng-lin GUO |
1045 |
Adsorption of copper ions on porous ceramsite prepared by diatomite and tungsten residue |
Qing-xiu JING,, Yun-yan WANG, Li-yuan CHAI, Chong-jian TANG, Xiao-dong HUANG, Huan GUO, Wei WANG, Wei YOU |
1053 |