中国有色金属学报2017年第27卷第4期-《中国有色金属学报》官方网站|全网首发

您目前所在的位置：首页 - 期刊目录

中国有色金属学报

The Chinese Journal of Nonferrous Metals

第27卷第4期 2017年4月

材料科学与工程
基于DEM-FEM的AZ31B板材软模成形极限预测	曹秒艳¹，李建超²，苑亚宁²，赵长财²，董国疆³	675
B-Cr变质对20%Mg₂Si/A356-1.3%Fe再生铝基复合材料组织和性能的影响	关玉芹¹，杜军¹，吴桃泉¹，曹东²，李文芳¹，许德英²	684
纳米TiC/Ti细化剂加入量对铸态Al-Zn-Cu-Mg合金组织和性能的影响	赵炳怡，蔡启舟，李欣蔚，李冰，程婧璠	692
贮箱Y形环焊接残余应力及其对承载行为的影响	李艳军¹，吴爱萍¹，刘德博²，赵海燕¹，赵玥¹，王国庆³	701
冷却速率对Ti-22Al-24Nb-0.5Mo合金显微组织和拉伸性能的影响	赵洪泽^{1, 2}，卢斌¹，杨锐¹	708
基于m值高效法的TA15合金超塑性变形	孙前江，王高潮	716
Ti-5.6Al-4.8Sn-2.0Zr-1.0Mo-0.35Si-0.85Nd合金α+β两相区变形行为及工艺参数优化	王克鲁，鲁世强，李鑫，董显娟	724
涂碳铝箔在锂硫电池中的应用	李涛^{1, 2}，洪波¹，曹华伟²，刘业翔¹，闫霄林¹，黄子欣²	732
锂离子电池正极材料LiNi_0.5Co_0.2Mn_0.3O₂的热电化学	肖忠良，周清清，宋刘斌，胡超明，卢意鹏，曹忠	739
采用抗坏血酸液相还原法制备微纳米铜粉	张萌¹，霍地¹，孙旭东¹，康雁²	747
模量可变NiTi-NbTi原位复合材料	姜江¹，蒋小华²，姜大强²，郝世杰²，郭方敏²，崔立山²	753
光发射谱对CrTiAlN涂层性能的影响	刘云超，罗艳艳，朱雪飞，施雯	760
嵌入式铝/钢带材轧制复合铝层和钢层厚度的变化规律	王春阳¹，姜雁斌^{1, 2}，谢建新^{1, 2}，毛晓东¹，周德敬³，张小军³	766
柔性受压对钨丝-镍复合电铸层微观结构和抗拉强度的影响	钱王欢，缪小梅，秦丰	776
LaFeO₃复合氧化物的制备与红外辐射性能	刘庆生，游拯，国辉，曾少军	781
胀形间隙对核主泵转子屏蔽套真空热胀形的影响	朱智，张立文，崔岩，张驰，李瑞琴	789
矿业工程 • 冶金工程 • 化学与化工
厄立特里亚阿斯马拉VMS矿床S、Pb同位素对成矿物质来源的约束	成曦晖^{1, 2}，徐九华^{1, 2}，王建雄³，禇海霞⁴，肖星^{1, 2}，张辉^{1, 2}	795
非胶结充填采场压风强化脱水实验与数值模拟	程海勇，吴爱祥，周升平，王贻明	811
羟肟萃取剂LIX984N酸解和铜萃取分相性能	刘晓荣¹，申君辉¹，刘妍君²，朱延号¹，张皓¹	818
椭圆型混合器内二元颗粒径向混合	张立栋¹，李连好¹，王擎¹，秦宏¹，李少华²	825
锂辉石表面环烷酸吸附行为的量子化学	何桂春¹，张慧婷¹，华亚南¹，蒋巍²	833
采用密度泛函方法研究铜铅分离的抑制机理	张行荣，刘崇峻，朱阳戈，郑桂兵，尚衍波，韩龙，艾晶	843
局部高频磁场作用下金属液面变形和波动行为	李阳^{1, 2}，邓安元^{1, 2}，张赛娟^{1, 2}，尹传奇^{1, 2}，王恩刚^{1, 2}	850
金属离子对矿物浮选行为的影响及机理研究进展	高跃升，高志勇，孙伟	859
双滴共沉淀法合成MgO-LDH的脱氟性能	汪爱河^{1, 2}，周康根¹，刘行¹，陈泉洲¹，刘芳¹	869

The Chinese Journal of Nonferrous Metals

中国有色金属学报

Vol. 27 No. 4 April 2017

Materials Science and Engineering
Forming limit prediction in flexible die forming of AZ31B sheet based on combination of DEM-FEM	CAO Miao-yan, LI Jiang-chao, YUAN Ya-ning, ZHAO Chang-cai, DONG Guo-jiang	675
Effects of B-Cr on microstructure and mechanical properties of 20%Mg₂Si/A356-1.3%Fe recycled aluminum matrix composites	GUAN Yu-qin, DU Jun, WU Tao-quan, CAO Dong, LI Wen-fang, XU De-ying	684
Effect of nano TiC/Ti refiner addition on microstructure and properties of as-cast Al-Zn-Mg-Cu alloy	ZHAO Bing-yi, CAI Qi-zhou, LI Xin-wei, LI Bing, CHENG Jing-fan	692
Numerical simulation on Y-ring welding residual stress and its effects on loading behavior of propellant tank	LI Yan-jun, WU Ai-ping, LIU De-bo, ZHAO Hai-yan, ZHAO Yue, WANG Guo-qing	701
Effect of cooling rate on microstructure and tensile properties of Ti-22Al-24Nb-0.5Mo alloy	ZHAO Hong-ze, LU Bin, YANG Rui	708
High efficient superplastic deformation of TA15 alloy based on m value	SUN Qian-jiang, WANG Gao-chao	716
Deformation behavior and process parameter optimization of Ti-5.6Al-4.8Sn-2.0Zr-1.0Mo-0.35Si-0.85Nd alloy in α+β forging process	WANG Ke-lu, LU Shi-qing, LI Xin, DONG Xian-juan	724
Application of carbon-coated aluminum foil for Li-S secondary batteries	LI Tao, HONG Bo, CAO Hua-wei, LIU Ye-xiang, YAN Xiao-lin, HUANG Zi-xin	732
Thermo-electrochemistry on LiNi_0.5Co_0.2Mn_0.3O₂ cathode material for lithium ion battery	XIAO Zhong-liang, ZHOU Qing-qing, SONG Liu-bin, HU Chao-ming, LU Yi-peng, CAO Zhong	739
Preparation of Cu micro/nanoparticles with ascorbic acid by liquid phase reduction method	ZHANG Meng, HUO Di, SUN Xu-dong, KANG Yan	747
Modulus variable in-situ NiTi-NbTi composite	JIANG Jiang, JIANG Xiao-hua, JIANG Da-qiang, HAO Shi-jie, GUO Fang-min, CUI Li-shan	753
Effects of OEM on the properties of CrTiAlN coatings	LIU Yun-chao, LUO Yan-yan, ZHU Xue-fei, SHI Wen	760
Thickness variation of aluminum layer-steel layer of embedded aluminum-steel composite strip during cold roll bonding	WANG Chun-yang, JIANG Yan-bin, XIE Jian-xin, MAO Xiao-dong, ZHOU De-jing, ZHANG Xiao-jun	766
Influence of flexible compression on microstructure and tensile strength of W fiber reinforced Ni composites by electroforming	QIAN Wang-huan, MIAO Xiao-mei, QIN Feng	776
Preparation and infrared radiation properties of LaFeO₃ composite oxides	LIU Qing-sheng, YOU Zheng, GUO Hui, ZENG Shao-jun	781
Effect of bulging clearance on vacuum hot bulge forming of reactor coolant pump rotor can	ZHU Zhi, ZHANG Li-wen, NIE Long-fei, CUI Yan, ZHANG Chi, LI Rui-qin	789
Mine Engineering, Metallurgical Engineering, Chemistry and Chemical Engineering
Sulfur and lead isotope constrains on source of ore-forming materials in Asmara VMS-type deposits, Eritrea	CHENG Xi-hui, XU Jiu-hua, WANG Jian-xiong, CHU Hai-xia, XIAO Xing, ZHANG Hui	795
Experiment and simulation of reinforcement dehydration by pressing wind in non-cemented backfilling	CHENG Hai-yong, WU Ai-xiang, ZHOU Sheng-ping, WANG Yi-ming	811
Degradation of oxime extractants LIX984N under impact of acid solution and phase disengagement of copper solvent extraction	LIU Xiao-rong, SHEN Jun-hui, LIU Yan-jun, ZHU Yan-hao, ZHANG Hao	818
Transverse mixing of binary granular in elliptical mixer	ZHANG Li-dong, LI Lian-hao, WANG Qing, QIN Hong, LI Shao-hua	825
Quantum chemistry of adsorption of naphthenic acid on surface of spodumene	HE Gui-chun, ZHANG Hui-ting, HUA Ya-nan, JIANG Wei	833
Depressing mechanism of copper-lead separation by density functional theory method	ZHANG Xing-rong, LIU Chong-jun, ZHU Yang-ge, ZHENG Gui-bing, SHANG Yan-bo, HAN Long, AI Jing	843
Metal liquid surface deformation and fluctuation behavior under high-frequency local magnetic field	LI Yang, DENG An-yuan, ZHANG Sai-juan, YIN Chuan-qi, WANG En-gang	850
Research progress of influence of metal ions on mineral flotation behavior and underlying mechanism	GAO Yue-sheng, GAO Zhi-yong, SUN Wei	859
Deflouridation efficiency of MgO-LDH prepared by double drop co-precipitation	Wang Ai-he, Zhou Kang-gen, Liu Xing, Chen Quan-zhou, Liu Fang	869

ISSN 1004-0609
CN 43-1238/TG
CODEN: ZYJXFK

ISSN 1003-6326
CN 43-1239/TG
CODEN: TNMCEW